Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. FoxESS
  4. PQ3-5.0-M_EQ5500-S_2S

Hybrid inverter · FoxESS · CEC approved November 2026

FoxESS PQ3-5.0-M_EQ5500-S_2S

CEC listing: PQ3-5.0-M_EQ5500-S_2S (AS4777-2 2020)

A 5 kW three-phase hybrid inverter that is battery-ready.

Rated power
5kWHow much solar it can run at once
Battery-ready
YesHybrid: a battery plugs straight in, no second box

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

PQ3-5.0-M_EQ5500-S_2S: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
  • It needs a three-phase supply, so check your switchboard or ask your installer.
  • It is CEC-approved, which a new install needs to qualify for STCs.
  • We hold no captured datasheet for this model yet, so the specs below come from the CEC register only.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
5kW
How much solar it can turn into usable power at once
Max efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the solar you make reaches the house
Phases
3-phase
Needs a three-phase supply, so check your switchboard
Type
Hybrid
Runs solar and a battery from one unit
Warranty
10yr
How long FOXESS CO LTD stands behind it

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the FoxESS PQ3-5.0-M_EQ5500-S_2S, by section.

Full datasheet, by section
SpecificationValue
Installation requirements
Top clearance300 mm
Side clearance300 mm
AC breaker40 A
Cable gauge6 mm²
Earthing methodTNS
DNSP pre-approvalYes
Estimated install time5 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
13 Nov 2026
Approval expiry
31 Dec 2027
Status
Active
Listed for STCs
Yes

About FoxESS

Years on the CEC list
7 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
148
CEC-approved batteries
172
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
21.3 kWh
Annual yield
7,756 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

au.fox-ess.com
7 years on the CEC list

How it compares

The FoxESS PQ3-5.0-M_EQ5500-S_2S against the closest-power inverters from other brands.

Specification
FoxESS PQ3-5.0-M_EQ5500-S_2SFoxESS
Energizer FORCE 5.0HSEnergizer
Energizer Force 5.0HT+Energizer
Rated power?5 kW5 kW5 kW
Max efficiency?Not on fileNot on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesThree-phaseSingle-phaseThree-phase
TypeHybridHybridHybrid
Battery readyYesYesYes
Warranty10 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • Warranty termsPDF, opens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab
  • Compliance certificateOpens in a new tab

10-year inverter warranty

FoxESS PQ3-5.0-M_EQ5500-S_2S

This warranty covers defects in materials and workmanship for 10 years. It excludes damage from non-accredited installation. To make a claim, contact an authorized installer.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Non-accredited installation, modification, tampering, improper handling, use of third-party connectors, cosmetic blemishes.
Environment limits
Operating ambient temperature shall be maintained between -10 °C (14 °F) and 50 °C (122 °F).
Read the official warranty document (PDF)

Fault & error codes — FoxESS PQ3-5.0-M_EQ5500-S_2S

From the install manual

19 documented

Showing 19 of 19. The official install manual is the authoritative source — always confirm before acting.

  • 10min Volt FaultcriticalCall your installer
    Manual (PDF)

    Grid voltage has been out of range for the last 10 minutes.

    Likely cause
    Persistent voltage fluctuation.
    What to do
    Wait for the utility to correct voltage levels or get in touch with support.
  • DCI FaultcriticalCall your installer
    Manual (PDF)

    DC component is outside the limit in output current.

    Likely cause
    Possible system malfunction or incorrect configuration.
    What to do
    Disconnect PV, grid, and battery, then reconnect.
  • Grid Freq FaultcriticalCall your installer
    Manual (PDF)

    The grid frequency is out of the specified range.

    Likely cause
    Frequency variations in the grid supply.
    What to do
    Wait for the grid to stabilize and keep monitoring the system. If this continues, consult support.
  • Grid Lost FaultcriticalCall your installer
    Manual (PDF)

    The grid connection has been lost.

    Likely cause
    Grid disconnection.
    What to do
    Check the utility connection and ensure power is restored. If the issue persists, contact support.
  • Grid Volt FaultcriticalCall your installer
    Manual (PDF)

    The grid voltage is out of the specified range.

    Likely cause
    Voltage fluctuations in the grid.
    What to do
    Wait for the grid to stabilize and monitor the system. Contact support if the issue persists.
  • Ground FaultcriticalCall your installer
    Manual (PDF)

    Ground connection has failed.

    Likely cause
    Improper grounding or damaged wiring.
    What to do
    Check the grounding connections; do not operate the inverter until fixed.
  • HW Inv Cur FaultcriticalCall your installer
    Manual (PDF)

    High output current detected by the hardware.

    Likely cause
    Overloading the inverter or short circuit.
    What to do
    Disconnect PV, grid, and battery, then reconnect.
  • Iso FaultcriticalCall your installer
    Manual (PDF)

    Isolation has failed.

    Likely cause
    Damaged insulation or improper connections.
    What to do
    Check insulation integrity; do not attempt to operate until resolved.
  • Res Cur FaultcriticalCall your installer
    Manual (PDF)

    High residual current detected.

    Likely cause
    Possible leakage or short circuit.
    What to do
    Inspect system for electrical leakage; avoid operation until checked.
  • SW Bus Vol FaultcriticalCall your installer
    Manual (PDF)

    Bus voltage is out of the specified range as detected by software.

    Likely cause
    Possible electrical fault or inadequate connections.
    What to do
    Disconnect PV, grid, and battery, then reconnect.
  • SW Inv Cur FaultcriticalCall your installer
    Manual (PDF)

    High output current detected by the software.

    Likely cause
    Possible overload or short circuit.
    What to do
    Disconnect PV, grid, and battery, then reconnect.
  • SW Pv Cur FaultcriticalCall your installer
    Manual (PDF)

    High PV input current detected by software.

    Likely cause
    Overvoltage or improper configuration.
    What to do
    Disconnect PV input, check for faults, then reconnect.
  • BACKUP Over LoadwarningCall your installer
    Manual (PDF)

    Overload detected in backup mode.

    Likely cause
    Insufficient capacity for the connected loads.
    What to do
    Reduce the load connected to the backup output.
  • Bat Power LowwarningCall your installer
    Manual (PDF)

    Battery power is low.

    Likely cause
    Battery nearing depletion without charging.
    What to do
    Charge the battery as soon as possible.
  • Bat Volt FaultwarningCall your installer
    Manual (PDF)

    Battery voltage fault detected.

    Likely cause
    Battery may be failing or disconnected incorrectly.
    What to do
    Check battery connections and voltage levels.
  • Over Load FaultwarningCall your installer
    Manual (PDF)

    Overload detected in on-grid mode.

    Likely cause
    Exceeding the inverter's power capacity.
    What to do
    Reduce load to within the inverter's capacity.
  • Pv Volt FaultwarningCall your installer
    Manual (PDF)

    PV voltage is out of the acceptable range.

    Likely cause
    Incorrect PV connections or faulty PV panels.
    What to do
    Verify PV panel connections and voltage output.
  • SW Bat Cur FaultwarningCall your installer
    Manual (PDF)

    High battery current detected by software.

    Likely cause
    Possible overload or faulty configuration.
    What to do
    Disconnect PV, grid, and battery, then reconnect.
  • Temp FaultwarningCall your installer
    Manual (PDF)

    Inverter temperature is too high.

    Likely cause
    Improper ventilation or excessive load.
    What to do
    Ensure adequate ventilation and reduce load if necessary.

More FOXESS CO LTD inverters

1K5-HI-5-V1 (AS4777-2 2020)

5 kW · 3φ

H3-5.0-Smart (AS4777-2 2020)

5 kW · 3φ

PQ3-5.0-M_EQ5500-S_3S (AS4777-2 2020)

5 kW · 3φ

PQ3-5.0-M_EQ5500-S_4S (AS4777-2 2020)

5 kW · 3φ

PQ3-5.0-M_EQ5500-S_5S (AS4777-2 2020)

5 kW · 3φ

PQ3-5.0-M_EQ5500-S_6S (AS4777-2 2020)

5 kW · 3φ

View all FOXESS CO LTD inverters

More from FoxESS

Other CEC-approved products from FoxESS available in Australia.

FoxESS Batteries

1K5-BAT-4660-L2

9.32 kWh · LFP

1K5-BAT-4660-L3

13.98 kWh · LFP

1K5-BAT-4660-L4

18.64 kWh · LFP

1K5-BAT-4660-L5

23.3 kWh · LFP

1K5-BAT-4660-L6

27.96 kWh · LFP

1K5-BAT-4660-L7

32.61 kWh · LFP

View all FoxESS batteries
View full FoxESS manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?