Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. FoxESS
  4. F3600-G2

Solar inverter · FoxESS · CEC approved May 2026

FoxESS F3600-G2

CEC listing: F3600-G2 (AS4777-2 2020)

A 3.6 kW single-phase solar inverter.

Rated power
3.6kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

F3600-G2: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
3.6kW
How much solar it can turn into usable power at once
Max efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
Type
Solar
Runs solar only
Warranty
10yr
How long FOXESS Co Ltd stands behind it

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the FoxESS F3600-G2, by section.

Full datasheet, by section
SpecificationValue
Physical
IP ratingIP65
Installation requirements
Top clearance300 mm
Side clearance300 mm
AC breaker25 A
Cable gauge4 mm²
Earthing methodTN-S
DNSP pre-approvalYes
Estimated install time5 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
8 May 2026
Approval expiry
28 Oct 2027
Status
Active
Listed for STCs
Yes

About FoxESS

Years on the CEC list
7 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
148
CEC-approved batteries
172
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
15.3 kWh
Annual yield
5,585 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

au.fox-ess.com
7 years on the CEC list

How it compares

The FoxESS F3600-G2 against the closest-power inverters from other brands.

Specification
FoxESS F3600-G2FoxESS
Energizer Force 3.6SEnergizer
Afore AF3.6K-SL-1Afore
Rated power?3.6 kW3.6 kW3.6 kW
Max efficiency?Not on fileNot on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeSolarSolarHybrid
Battery readyNoNoYes
Warranty10 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

10-year inverter warranty

FoxESS F3600-G2

This 10-year warranty covers defects in materials and workmanship. Major exclusions include unqualified installation and environmental damage. For claims, contact customer service.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Warranty void if not installed by a licensed technician, modified, or improperly used.
Environment limits
Saline conditions and extreme temperature environments (above 60°C) void warranty.
Read the official warranty document (PDF)

Fault & error codes — FoxESS F3600-G2

From the install manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

  • Bus OVPcriticalCall your installer
    Manual (PDF)

    Bus OVP - Disconnect PV (+), PV (-) with DC. - After the LCD switches off, reconnect and check again.

    Likely cause
    Overvoltage on the bus.
    What to do
    Disconnect and check system after it reboots.
  • GFC FaultcriticalCall your installer
    Manual (PDF)

    GFC Fault - Disconnect DC and AC connector, check the surrounding equipment on the AC side. - Reconnect the input connector and check the state of inverter after troubleshooting.

    Likely cause
    Ground fault in the AC system.
    What to do
    Check connections and surroundings, then troubleshoot.
  • Ground FaultcriticalCall your installer
    Manual (PDF)

    Ground Fault - Check the voltage of neutral and PE. - Check AC wiring. - Restart inverter, if error message persists, seek for help from us.

    Likely cause
    Issues with grounding.
    What to do
    Check and ensure all connections are secure.
  • Isolation FaultcriticalCall your installer
    Manual (PDF)

    Isolation Fault - Check the impedance among PV (+), PV (-) and ground. Impedance should be >1Mohm. - Please seek for help from us if it cannot be detected or the impedance is <1Mohm.

    Likely cause
    Insulation failure.
    What to do
    Check impedance values and seek help.
  • DCI FaultwarningCall your installer
    Manual (PDF)

    DCI Fault - Wait for one minute after the inverter reconnects to grid. - Disconnect PV (+), PV (-) with DC. - After the LCD switches off, reconnect and check again.

    Likely cause
    Inverter connection issue with DC system.
    What to do
    Wait and check connections after reboot.
  • EEPROM FaultwarningCall your installer
    Manual (PDF)

    EEPROM Fault - Disconnect PV (+), PV (-) with DC. - After the LCD switches off, reconnect and check again.

    Likely cause
    Error in EEPROM memory.
    What to do
    Disconnect and reconnect.
  • Grid 10Min OVPwarningCall your installer
    Manual (PDF)

    Grid 10Min OVP - System will reconnect if the grid is back to normal. - Or seek for help from us if it does not go back to normal state.

    Likely cause
    Grid overvoltage.
    What to do
    Monitor grid stability and check with installer if necessary.
  • Grid Freq FaultwarningCall your installer
    Manual (PDF)

    Grid Freq Fault - Wait for one minute, grid may go back to normal working state. - Make sure that grid voltage and frequency complies with standards.

    Likely cause
    Frequency outside of acceptable range.
    What to do
    Monitor grid frequency and reconnect after a minute.
  • Over TempwarningCall your installer
    Manual (PDF)

    Over Temp - Check if the environment temperature is over the limit. - Or seek for help from us.

    Likely cause
    System overheating.
    What to do
    Evaluate surrounding temperatures, if excessive, seek help.
  • SPS FaultwarningCall your installer
    Manual (PDF)

    SPS Fault - Turn off the PV and grid, reconnect them. - Please seek for help from us if it does not go back to normal state.

    Likely cause
    Possible issues with the SPS system.
    What to do
    Turn off power and reconnect.

More FOXESS Co Ltd inverters

1K5-1P-HI-3.7 (AS4777-2 2020)

3.68 kW · 1φ

AC1-3.7-E-G2 (AS4777-2 2020)

3.68 kW · 1φ

H1-3.7-E-G2 (AS4777-2 2020)

3.68 kW · 1φ

AIO-AC1-5.0-HVS5.2 (AS4777-2 2020)

4 kW · 1φ

AIO-AC1-6.0-HVS5.2 (AS4777-2 2020)

4 kW · 1φ

AC1-3.0-E-G2 (AS4777-2 2020)

3 kW · 1φ

View all FOXESS Co Ltd inverters

More from FoxESS

Other CEC-approved products from FoxESS available in Australia.

FoxESS Batteries

1K5-BAT-4660-L2

9.32 kWh · LFP

1K5-BAT-4660-L3

13.98 kWh · LFP

1K5-BAT-4660-L4

18.64 kWh · LFP

1K5-BAT-4660-L5

23.3 kWh · LFP

1K5-BAT-4660-L6

27.96 kWh · LFP

1K5-BAT-4660-L7

32.61 kWh · LFP

View all FoxESS batteries
View full FoxESS manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?