Solar inverter · FIMER · CEC approved October 2025
CEC listing: UNO-DM-5.0-TL-PLUS-B-QU (AS4777-2 2020)
A 5 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the FIMER UNO-DM-5.0-TL-PLUS-B-QU, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 97% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| Dimensions (H×W×D) | 418 × 863 × 175 mm |
| Weight | 15 kg |
| IP rating | IP65 |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.fimer.comThe FIMER UNO-DM-5.0-TL-PLUS-B-QU against the closest-power inverters from other brands.
| Specification | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer | |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 97.0% | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The warranty covers defects in materials and workmanship for five years. It does not cover damage from improper installation, external factors, or modifications. To make a claim, contact FIMER directly.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
UNO-DM-5.0-TL-PLUS-SB-QU (AS4777-2 2020)
5 kW · 1φ
FIM-HY-5.0-SE-A-1PH (AS4777-2 2020)
5 kW · 1φ
UNO-DM-4.6-TL-PLUS-B-Q (AS4777-2 2020)
4.6 kW · 1φ
UNO-DM-4.6-TL-PLUS-SB-Q (AS4777-2 2020)
4.6 kW · 1φ
FIM-HY-4.6-SE-A-1PH (AS4777-2 2020)
4.6 kW · 1φ
UNO-DM-4.0-TL-PLUS-B-Q (AS4777-2 2020)
4 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.