Batteries3 listed
- Approved models
- 2
- Usable capacity
- 5 kWh
- Warranty
- 15 years · terms listed for 1 of 3 models
- Chemistry
- LFP
- Backup capable
- 1 of 3 models
Enphase · manufacturer profile
The IQ Battery 5P with FlexPhase and the original 5P
Inverter manufacturer
Updated 2 November 2026 · Checked against Enphase's Australian warranty and datasheets, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
Enphase puts the inverter inside the battery. Each 5 kWh IQ Battery 5P carries six microinverters. So it joins on the household side of the wiring. The FlexPhase model is set on site for single-phase or three-phase supply, and the original 5P is single-phase only. Both carry a 15-year warranty, or 6,000 cycles if that comes first. At year 10 the promise is 70% of capacity, for batteries activated on or after 15 June 2025. Enphase Energy in California stands behind that warranty, with an importer in South Melbourne. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Specifications and pricing change. Confirm them with the manufacturer.
The company
Enphase says it was founded in 2006, and that its shares trade on the NASDAQ as ENPH. Its business is the microinverter: a small inverter that sits at one solar panel and turns that panel's power into household power. The IQ Battery is that idea moved into a battery box, with six microinverters built in.
On the roof, Enphase says, one microinverter per panel means each panel works on its own, and production carries on if one fails. It says rapid shutdown is built in, so the roof's solar can be switched off in an emergency. The Clean Energy Council (CEC) register carries Enphase's IQ7, IQ8 and IQ9N microinverters, the newest approved in March 2026.
In Australia, Enphase Energy Aust. Pty Ltd in South Melbourne is the importer named on the battery warranty. The warranty itself comes from Enphase Energy, Inc. in Fremont, California, the maker. A claim goes through Enphase's returns process.
A warranty claim goes through Enphase's returns process (its RMA procedure), during the warranty period and within 90 days of finding the fault.
From Enphase's Australian battery warranty, effective 15 June 2025, read 8 October 2026.
An Enphase battery brings its own inverters. Six sit inside each 5 kWh unit, IQ8T-BAT in the FlexPhase and IQ8D-BAT in the original. So the battery is AC-coupled (it connects on the household side of the wiring), and it sits beside the solar rather than in its path. Enphase says a home can start small and add more IQ Batteries as its needs grow.
In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. That covers a first unit added to existing solar, and a later unit added to the first. Ask the installer what it means for the site before you size the first unit.
FlexPhase is the other difference. One unit is set up for single-phase or three-phase supply on site. It leaves the factory as single-phase, and the installer switches it by the installation guide. On three-phase it spreads its output across the three phases, up to 1.28 kVA on each (kVA is the datasheet's unit for power supplied at once).
There are no fans. Both units cool by natural convection, air moving over the case, and the original 5P's datasheet adds that there are no moving parts.
Two batteries, a controller and the microinverters make up the Enphase range on this page. The IQ Battery 5P with FlexPhase covers ten listed models, on the CEC register to 31 December 2027. The original IQ Battery 5P is listed to 13 December 2026. No Enphase AC Battery is on the register.
5 kWh usable, LFP (lithium iron phosphate); 1.65 to 3.84 kVA single-phase or 1.84 to 3.84 kVA three-phase, set on site; any rating other than 3.84 kVA needs at least two batteries to comply with AS/NZS 4777.2
CEC approved
5 kWh usable, LFP; six IQ8D-BAT microinverters; 3.84 kVA, single-phase
CEC listed to 13 December 2026
Needed for backup on both; the original 5P needs it for grid-tied running too
Sold as its own unit
IQ7, IQ8 and IQ9N families on the register, listed to dates from December 2026 to March 2029
CEC approved
The FlexPhase unit holds 5.0 kWh usable. That figure already allows a 2% safety limit, and a further 3% is held back at night to keep the battery's electronics running. The cells are LFP (lithium iron phosphate). Six IQ8T-BAT microinverters inside turn stored DC into household AC. The round trip from AC to battery and back returns 90% at the start of life.
It is one battery with ten model names. Five single-phase models run from 1.65 to 3.84 kVA of continuous output (kVA is the datasheet's unit for power supplied at once). Five three-phase models run from 1.84 to 3.84 kVA across the three phases, 0.61 to 1.28 kVA on each. The unit leaves the factory as single-phase, and the installer switches it to three-phase by the installation guide. The quick install guide's Australia and New Zealand section sets a condition on the rating: if any rating other than 3.84 kVA is selected, the system must include at least two batteries to comply with AS/NZS 4777.2:2020 Amd 2:2024 (the grid-connection standard for inverters).
It supports full backup with an IQ System Controller 3 INT, which is sold as its own unit. Peak output in backup is listed per model as a current, with no kVA figure.
Charging runs from -20 to 50 °C and slows below 15 °C and above 45 °C. Discharging runs to 55 °C and slows above 50 °C. The case is IP55 (dust-protected and protected against water jets), for indoor or outdoor use. It cools by natural convection, with no fan. A wall bracket is in the box, and the floor stand is sold separately. Installed, it weighs 83 kg and measures 980 by 550 by 188 mm.
The datasheet pairs it with Enphase's IQ Series microinverters and with third-party PV string inverters, the latter with the IQ System Controller 3 INT.
The original 5P is the single-phase unit, with six grid-forming IQ8D-BAT microinverters and the same 5.0 kWh of LFP cells. All of it is usable at 100% depth of discharge (the share of the battery that can be drained). A reserve for off-grid use can be set by the owner, and it is not available while on the grid.
Continuous output is 3.84 kVA. For short bursts it reaches 7.68 kVA for 3 seconds and 6.14 kVA for 10 seconds, on the grid or in backup. The round trip returns 90% AC to AC, and 96% on the DC side.
It needs an IQ System Controller 3 INT for everyday grid-tied running as well as backup. The FlexPhase needs one for backup only. It works with Enphase's IQ Series and S Series microinverters. The datasheet lists backup, self-consumption and time-of-use modes, monitoring in the Enphase App, and remote software and firmware updates.
Charging runs from -20 to 50 °C and discharging to 55 °C, and the datasheet gives 0 to 30 °C as the best range. The case is IP55 and rated outdoor; the microinverters inside are IP67. The quick install guide asks for a well-ventilated location out of direct sunlight. Cooling is natural convection, with no moving parts or fans. Installed weight is 78.9 kg, and 66.3 kg to lift. The wall bracket is in the box, and the pedestal mount is sold separately.
On the register it is BAT-404, approved 2 May 2023 and listed to 13 December 2026.
Three parts sit around the battery on an Enphase quote. The IQ System Controller 3 INT handles backup on both batteries, and everyday running on the original 5P. Both datasheets pair the batteries with Enphase's IQ Series microinverters. The original 5P also takes S Series, and the FlexPhase also lists third-party PV string inverters. The floor stand is a separate part, so check the mounting is on the quote.
Enphase says its IQ Energy Management learns the home's habits and the weather. By the same account it forecasts solar, prices and daily needs, then picks when to use the grid, the panels or the battery. It says that comes built into new systems with an IQ Gateway Metered, and that standard gateways can be upgraded. In a blackout, Enphase says, Load Control in its app can switch off power-hungry appliances to stretch the charge, automatically or by hand.
Both batteries use LFP cells. Enphase says IQ Batteries run on low-voltage DC and avoid the dangers of high-voltage DC. It also says they meet the performance criteria of UL 9540A, a unit-level test of whether fire spreads inside a wall-mounted home battery. No test report we read backs either claim, so both stay Enphase's word. On the roof, Enphase says, its IQ microinverters have rapid shutdown built in.
Both batteries carry 15 years from the activation date, or 6,000 discharged cycles, whichever comes first. Activation is the earlier of registering the battery with Enphase or switching it on through the installer portal. For batteries activated from 15 June 2025, Enphase promises at least 70% of nameplate capacity at the end of year 10, and 60% at the end of year 15. Batteries activated under the April 2023 warranty are promised 60% through the period.
There is no energy-throughput cap; the period ends at 6,000 discharged cycles.
Four conditions matter. The battery should stay connected to the internet for the whole period, except where an outage is outside your control. It must stay at the home where it was first installed, in Australia or New Zealand, and be sold by Enphase or an Enphase-authorised reseller. A battery activated after its Energize by date is not covered. A claim goes in during the period and within 90 days of finding the fault, through Enphase's returns process.
The warrantor is Enphase Energy, Inc. in Fremont, California. Enphase Energy Aust. Pty Ltd in South Melbourne is the importer. The warranty says the goods come with guarantees that cannot be excluded under the Australian Consumer Law. On the roof, Enphase's Australian warranty gives IQ8 and IQ9 microinverters 25 years from activation for those activated from 15 October 2026. Its data sheets print 25 years where an internet-connected IQ Gateway is installed. An earlier edition gave IQ8 micros activated from 6 June 2023 to 31 January 2024 a 15-year term.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Synergy's list names inverters. For an Enphase battery, the inverters are the six microinverters inside the unit. Those are what the list has to carry. The line above is the current answer, dated to the list it reads.
A second WA rule applies when a battery is added. In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. Budget for that with the installer, whether it is the first unit or a later one.
The scheme also asks the household to join a virtual power plant (VPP), a program that lets a retailer draw on home batteries. Synergy's own VPP is Battery Rewards, and a battery supplier's VPP can stand in under the scheme's conditions. The full conditions are on our WA battery rebate page, and our Synergy approved products guide explains the list.
An Enphase battery carries its own inverters, so it joins on the household side of the wiring beside solar that is already there. The FlexPhase unit is set on site for single-phase or three-phase supply, and the original 5P is single-phase. Both are 5 kWh units, so a bigger store means more units. In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. The warranty runs 15 years from activation, with the battery online and bought from an authorised reseller. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Enphase inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Ask where the installer buys the battery, and get the answer in writing. The warranty covers only batteries sold by Enphase or an Enphase-authorised reseller. Get the model code on the quote. If backup matters, agree which circuits stay on in a blackout.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 15 years from activation or 6,000 discharged cycles, whichever comes first, on both batteriesEnphase's Australian storage warranty, effective 15 June 2025 |
|---|---|
| Batteries | LFP (lithium iron phosphate), 5 kWh usable |
| Approved now | 2 batteries and 23 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office and phone line. Contact details |
| Local support | Yes, support handled through Australian channelsSource: maker's Australian site, checked 8 May 2026Confirmed |
| CEC listings | 25 approved right now · 10 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
2 CEC-approved batteries, 1 not currently listed · grouped into 3 series
Based on manufacturer specifications and CEC-approved configurations. Always confirm system design with your installer.
Grouped by series. Open a series for each variant, or a model for full specs.
23 CEC-approved inverters, 9 not currently listed · grouped into 4 series
IQ7A-72-E-ACM-INT (AS4777-2 2020)
IQ7A-72-M-INT (AS4777-2 2020)
IQ7PLUS-72-M-INT (AS4777-2 2020)
IQ7X-96-E-INT (AS4777-2 2020)
IQ8AC-72-M-ACM-INT (AS4777-2 2020)
IQ8AC-72-M-INT (AS4777-2 2020)
IQ8HC-72-M-ACM-INT (AS4777-2 2020)
IQ8HC-72-M-INT (AS4777-2 2020)
IQ8MC-72-M-ACM-INT (AS4777-2 2020)
IQ8P-72-2-INT (AS4777-2 2020)
IQ8X-80-M-INT (AS4777-2 2020)
IQ7-60-2-INT (AS4777-2 2020)
IQ7-60-M-INT (AS4777-2 2020)
IQ7A-72-2-INT (AS4777-2 2020)
IQ7A-72-E-ACM-INT (AS4777-2 2020)
IQ7A-72-M-INT (AS4777-2 2020)
IQ7PLUS-72-2-INT (AS4777-2 2020)
IQ7PLUS-72-E-ACM-INT (AS4777-2 2020)
IQ7PLUS-72-M-INT (AS4777-2 2020)
IQ7X-96-E-INT (AS4777-2 2020)
Compatible batteries: IQ Battery 5P, IQ Battery 3T, IQ Battery 10T
| Battery Model | IQ Battery 5P | IQ Battery 3T | IQ Battery 10T |
|---|---|---|---|
| Charge/Discharge (kW) | 3.84/3.84 | 1.28/1.28 | 3.84/3.84 |
Understanding Power Ratings:
* DC charge/discharge power varies from AC power due to inverter efficiency. Always consult with your installer for specific system design.
What has happened to Enphase on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
IQ Battery Launch in Australia
AC-coupled modular battery system with microinverter integration
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
Enphase says yes: a home can start small and add IQ Batteries as its needs grow. Each unit is 5 kWh. In WA, adding a battery is an alteration, so the whole site has to meet Synergy's current requirements unless Synergy grants a derogation. So ask the installer what a second unit involves.
The original 5P needs the IQ System Controller 3 INT for everyday grid-tied running and for backup. The FlexPhase needs it for backup only. It is sold as its own unit, so look for it as a line on the quote.
Yes, for the warranty. The battery should stay online for the whole 15 years. A break outside your control does not count against you. The term starts on the activation date: when the battery is registered with Enphase, or switched on through the installer portal, whichever is earlier.
Both are IP55 (dust-protected and protected against water jets). The FlexPhase is rated for indoor or outdoor use and the original 5P for outdoor. Charging slows above 45 °C on the FlexPhase, and both discharge up to 55 °C. Enphase's IQ Battery 5P quick install guide, citing AS/NZS 5139, asks for a well-ventilated location out of direct sunlight.
Enphase is headquartered in Fremont, California, USA and was founded in 2006. Its products are sold in Australia through SAA-accredited installers.
Enphase's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 2 CEC-approved Enphase battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
Enphase has 23 CEC-approved inverter models from 0.3-3.8 kW (single and three phase). Compare them against other brands by size, phase and battery compatibility.
Are you Enphase?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How battery backup works in a power outage, which circuits stay on, and what to ask the installer.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.