Loading Solar Battery Perth...
Loading Solar Battery Perth...
Eaton Power Quality (Shanghai) Co Ltd
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Rated Power
125 kW
Max Efficiency
98.6%
Phases
Three Phase
Max Input Voltage
—
Min Input Voltage
—
Max Input Current
—
Output Voltage
—
Max Output Current
—
Country of Origin
Unknown
Series
Eaton 93PCS
Warranty
2 years
Dimensions
0 x 0 x 0 mm
IP Rating
IP20
Operating Temp
-25..40°C
Cooling
Natural
Battery Compatible
No
Backup Capable
Yes
ESM Compliant
No
Black Start
No
Grid Forming
No
Export Limiting
No
Remote Monitoring
No
CEC Approved
18 June 2025
Approval Expiry
18 June 2028
Status
Active
Eligible for Rebates
Yes
Years in AU Market
1 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Unknown
$25,000–$50,000
Perth installed price estimate · medium confidence
Prices vary by installer, configuration, and site complexity. Get exact quotes via our installer matching.
From May 1, 2026, all new battery installations in WA require CSIP-AUS compliant inverters. Verify ESM status with your installer.
Perth's high ambient temperatures (regularly 35°C+) can reduce inverter efficiency and trigger thermal throttling. For installations in direct sun or non-ventilated garages, consider inverters with active cooling and wide operating temperature ranges. All grid-connected installations require Western Power approval. Systems above 5kVA require ESM compliance under WA regulations.
Compare this inverter with batteries for a complete system analysis
The Eaton Power Quality (Shanghai) Co Ltd 93PCS 500 (AS4777-2 2020) against the closest-power inverters from other brands.
| Specification | Eaton Power Quality (Shanghai) Co Ltd 93PCS 500 (AS4777-2 2020)Eaton Power Quality (Shanghai) Co Ltd | ||
|---|---|---|---|
| Rated power? | 125 kW | 125 kW | 125 kW |
| Max efficiency? | 98.6%best value | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 2 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Eaton offers a 24-month warranty from the boot date, provided booting is done by Eaton or authorized engineers. The warranty covers defects but excludes damage from unauthorized modifications and environmental factors.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.
Bus voltage anomaliescriticalCall your installerDC bus voltage is too high or too low
DC input overvoltagecriticalCall your installerDC input voltage exceeds upper limit
Emergency stopcriticalEmergency stop activated
Grid frequency anomaliescriticalCall your installerGrid frequency is out of set range
Grid overvoltagecriticalCall your installerGrid voltage exceeds the upper limit
Grid undervoltagecriticalCall your installerGrid voltage falls below the lower limit
Low DC voltagecriticalCall your installerDC input voltage falls below the lower limit
Fan failurewarningCall your installerAt least one cooling fan has failed
Grid reverse sequencewarningCall your installerAC grid reverse sequence detected
Soft start failurewarningCall your installerSoft start of the device failed
The inverter is over-temperaturewarningCall your installerInverter temperature is too high
Part of the Eaton Power Quality (Shanghai) Co Ltd Eaton 93PCS series
Compare every Eaton Power Quality (Shanghai) Co Ltd Eaton 93PCS variant side by side →
93PCS 125 (AS4777-2 2020)
125 kW · 3φ
93PCS 250 (AS4777-2 2020)
250 kW · 3φ
93PCS 375 (AS4777-2 2020)
375 kW · 3φ
93PCS 630 (AS4777-2 2020)
630 kW · 3φ
Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.