Hybrid inverter · Neovolt · CEC approved November 2026
CEC listing: BW-INV-SPH6K1 (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Neovolt BW-INV-SPH6K1, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 50 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 3 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Neovolt BW-INV-SPH6K1 against the closest-power inverters from other brands.
| Specification | Neovolt BW-INV-SPH6K1Neovolt | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Bytewatt products are covered for 5 years. The main exclusion is damage from improper installation. To claim, contact Bytewatt with fault details.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.
100005criticalCall your installerBus overvoltage
100007criticalCall your installerInsulation fault
100011criticalCall your installerOver temperature
100000warningGrid overvoltage
100001warningGrid undervoltage
100002warningGrid overload
100003warningGrid underfrequency
100009warningCall your installerLeakage current test failure
100010warningCall your installerGrid relay fault
100017warningCall your installerMPPT1 overvoltage
100018warningMPPT1 short circuit protection
100019warningMPPT1 hardware overcurrent
100020warningCall your installerMPPT1 over temperature
100008infoGFCI fault
100014infoCommunication fault
BW-INV-SPH6K (AS4777-2 2020)
6 kW · 1φ
BW-INV-SPB5K (AS4777-2 2020)
5 kW · 1φ
BW-INV-SPH5K (AS4777-2 2020)
5 kW · 1φ
BW-INV-SPB8K (AS4777-2 2020)
8 kW · 1φ
BW-INV-SPB8K1 (AS4777-2 2020)
8 kW · 1φ
BW-INV-SPH8K (AS4777-2 2020)
8 kW · 1φ
Other CEC-approved products from Neovolt available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.