Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Neovolt
  4. BW-INV-SPH6K

Hybrid inverter · Neovolt · CEC approved November 2026

Neovolt BW-INV-SPH6K

CEC listing: BW-INV-SPH6K (AS4777-2 2020)

A 6 kW single-phase hybrid inverter that is battery-ready.

Rated power
6kWHow much solar it can run at once
Battery-ready
YesHybrid: a battery plugs straight in, no second box

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

BW-INV-SPH6K: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.
  • We hold no captured datasheet for this model yet, so the specs below come from the CEC register only.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
6kW
How much solar it can turn into usable power at once
Max efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
Type
Hybrid
Runs solar and a battery from one unit
Warranty
5yr
How long Bytewatt Technology Co Ltd stands behind it

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the Neovolt BW-INV-SPH6K, by section.

Full datasheet, by section
SpecificationValue
Installation requirements
Top clearance300 mm
Side clearance300 mm
AC breaker50 A
Cable gauge10 mm²
Earthing methodTN-S
DNSP pre-approvalYes
Estimated install time3 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
2 Nov 2026
Approval expiry
2 Nov 2029
Status
Active
Listed for STCs
Yes

About Neovolt

Years on the CEC list
3 years
Australian office
Not verified
Category
Budget
CEC-approved inverters
18
CEC-approved batteries
14
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
25.5 kWh
Annual yield
9,308 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years on the CEC list

How it compares

The Neovolt BW-INV-SPH6K against the closest-power inverters from other brands.

Specification
Neovolt BW-INV-SPH6KNeovolt
Energizer FORCE 6.0HSEnergizer
Energizer Force 6.0HT+Energizer
Rated power?6 kW6 kW6 kW
Max efficiency?Not on fileNot on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesSingle-phaseSingle-phaseThree-phase
TypeHybridHybridHybrid
Battery readyYesYesYes
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • Warranty termsPDF, opens in a new tab
  • Installation guide and user manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

5-year inverter warranty

Neovolt BW-INV-SPH6K

Bytewatt products are covered for 5 years. The main exclusion is damage from improper installation. To claim, contact Bytewatt with fault details.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Does not transfer with the home
What voids it
Inadequate ventilation, improper installation, unauthorized repairs, use of non-compliant parts, improper use, and damage during transportation void the warranty.
Environment limits
The ambient temperature during the operation of the Products shall not fall below -10 °C or exceed 50 °C.
Read the official warranty document (PDF)

Fault & error codes — Neovolt BW-INV-SPH6K

From the install manual

15 documented

Showing 15 of 15. The official install manual is the authoritative source — always confirm before acting.

  • 100005criticalCall your installer
    Manual (PDF)

    Bus overvoltage

    Likely cause
    Check whether the input voltage of PV1 and PV2 exceeds 580V.
    What to do
    If the first one does not exist, restart the inverter to see if the fault still exists. If it still exists, please call the service center.
  • 100007criticalCall your installer
    Manual (PDF)

    Insulation fault

    Likely cause
    Check whether PV cable connection is reliable.
    What to do
    Check whether PV cable is damaged.
  • 100011criticalCall your installer
    Manual (PDF)

    Over temperature

    Likely cause
    Check whether the environment around inverter is with poor heat dissipation.
    What to do
    Confirm whether inverter installation meets the installation requirements.
  • 100000warning
    Manual (PDF)

    Grid overvoltage

    Likely cause
    Check whether Grid is abnormal. Confirm whether the grid cable connection is normal.
    What to do
    Restart inverter and check whether the fault is existing.
  • 100001warning
    Manual (PDF)

    Grid undervoltage

    Likely cause
    Check whether Grid is abnormal. Confirm whether the grid cable connection is normal.
    What to do
    Restart inverter and check whether the fault is existing.
  • 100002warning
    Manual (PDF)

    Grid overload

    Likely cause
    Check whether Grid is abnormal. Confirm whether the grid cable connection is normal.
    What to do
    Restart inverter and check whether the fault is existing.
  • 100003warning
    Manual (PDF)

    Grid underfrequency

    Likely cause
    Check whether Grid is abnormal. Confirm whether the grid cable connection is normal.
    What to do
    Restart inverter and check whether the fault is existing.
  • 100009warningCall your installer
    Manual (PDF)

    Leakage current test failure

    Likely cause
    Restart inverter and check whether the fault is existing.
    What to do
    If it still exists, please call the service center.
  • 100010warningCall your installer
    Manual (PDF)

    Grid relay fault

    Likely cause
    Restart inverter and check whether the fault is existing.
    What to do
    If it still exists, please call the service center.
  • 100017warningCall your installer
    Manual (PDF)

    MPPT1 overvoltage

    Likely cause
    Check the PV1 voltage. If it exceeds 585VDC, reduce the number of PV modules.
    What to do
    If it still exists, please call the service center.
  • 100018warning
    Manual (PDF)

    MPPT1 short circuit protection

    Likely cause
    Try to reduce the PV power.
    What to do
    Restart the inverter to see if the fault still exists.
  • 100019warning
    Manual (PDF)

    MPPT1 hardware overcurrent

    Likely cause
    Try to reduce the PV power.
    What to do
    Restart the inverter to see if the fault still exists.
  • 100020warningCall your installer
    Manual (PDF)

    MPPT1 over temperature

    Likely cause
    Try to lower the ambient temperature.
    What to do
    Make sure that the inverter is installed according to the manual and there is no shelter around the inverter.
  • 100008info
    Manual (PDF)

    GFCI fault

    Likely cause
    Restart inverter and check whether the fault is existing.
    What to do
    If it still exists, please call the service center.
  • 100014info
    Manual (PDF)

    Communication fault

    Likely cause
    Restart the inverter and check whether the fault is existing.
    What to do
    If it still exists, please call the service center.

More Bytewatt Technology Co Ltd inverters

BW-INV-SPH6K1 (AS4777-2 2020)

6 kW · 1φ

BW-INV-SPB5K (AS4777-2 2020)

5 kW · 1φ

BW-INV-SPH5K (AS4777-2 2020)

5 kW · 1φ

BW-INV-SPB8K (AS4777-2 2020)

8 kW · 1φ

BW-INV-SPB8K1 (AS4777-2 2020)

8 kW · 1φ

BW-INV-SPH8K (AS4777-2 2020)

8 kW · 1φ

View all Bytewatt Technology Co Ltd inverters

More from Neovolt

Other CEC-approved products from Neovolt available in Australia.

Neovolt Batteries

BW-BAT-10.1P

9.6 kWh · LFP

BW-BAT-10.1P II

19.2 kWh

BW-BAT-10.1P III

28.8 kWh

BW-BAT-10.1P IV

38.4 kWh

BW-BAT-10.1P V

48 kWh

BW-BAT-10.1P VI

57.6 kWh

View all Neovolt batteries
View full Neovolt manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?