Batteries36 listed
- Approved models
- 36
- Usable capacity
- 4.6-50 kWh
- Chemistry
- LFP
Midea · manufacturer profile
PowerInfi, H1 and the other home lines, profile in progress
Battery manufacturer
Updated 3 November 2026 · Checked against Midea's Australian PowerInfi brochure and warranty policy, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
Midea's home batteries come from three makers on the Clean Energy Council (CEC) register: two Midea companies and Hiconics, which builds the MEBC2 and MD-BS lines. Midea's Australian brochure for the PowerInfi gives each battery module 6.86 kWh usable. Midea's warranty for Australia gives the MEBC2 system 10 years from installation. This page covers the register, the brochure and the warranty for now. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Midea inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Specifications and pricing change. Confirm them with the manufacturer.
The company
On the Clean Energy Council (CEC) register, Midea-branded batteries come from three companies. Two are Midea firms, GD Midea Air-Conditioning Equipment and GD Midea Heating and Ventilating Equipment. The third, Hiconics Eco-energy Drive Technology, makes the MEBC2 and MD-BS batteries and the PowerInfi, MD and OMNI X hybrids.
The M1 hybrids were approved in August 2025 and the LV Residential ESS in September 2025. The H1 followed in October 2025. The MD-BS, PowerInfi and OMNI X lines were all approved during 2026.
Midea's warranty policy names Midea Electronics Australia Co Pty Ltd of St Kilda Road in Melbourne as the importer. Ask the installer who handles a Midea battery claim, and keep that in writing with your quote.
Midea's PowerInfi brochure gives its battery module, the BAT 7.0, 7.03 kWh, of which 6.86 kWh is usable. On the register, Hiconics lists MEBC2 builds from 5 to 82.32 kWh usable, approved from April to October 2026.
The other lines are smaller. The H1 grows from 5 to 20 kWh in 5 kWh steps. The MD-BS is listed at 5 to 30 kWh, and the LV Residential ESS at 4.61 to 27.54 kWh. The LV Residential ESS was approved in September 2025 and the MD-BS in February 2026.
Midea hybrids on the register include the PowerInfi inverters, single-phase and three-phase from 3 to 15 kW. There are also the three-phase M1 at 5 to 10 kW, the single-phase MD at 3.8 to 6 kW, and the OMNI X at 15 to 30 kW.
The PowerInfi brochure lists the battery module as IP66 (dust-tight and protected against powerful water jets). On the register, every Midea battery uses LFP (lithium iron phosphate) cells. Each is marked for outdoor use. This page does not yet carry the brochure's temperature or fire details.
Midea's warranty policy for Australia covers the MEBC2 all-in-one system for 120 months from installation. It ends sooner if 126 months from manufacture comes first. It promises at least 70% of nominal energy within a set throughput. From the sixth year a Midea authorised technician must inspect the system each year. The policy names only the MEBC2 builds, so ask for the H1, MD-BS or LV terms in writing.
The brochure gives the PowerInfi module a cycle life of 8000 cycles at room temperature and a 0.5C charge and discharge rate, down to 70% of its capacity. The warranty policy sets its own limit: 8,000 cycles for the MEBC2-B14H-Pro series and 6,000 for the MEBC2-B5H-AIO series, or 120 months if that comes first.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Midea inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Synergy's list covers inverters, so the inverter on the quote is what counts. Midea's own hybrids are the PowerInfi, M1, MD and OMNI X.
You also need to join a virtual power plant (VPP). A VPP can use part of the battery when demand peaks. Synergy's is called Battery Rewards. Ask the installer which VPP a Midea system can join.
Our WA battery rebate page has the other rules. Our Synergy approved products guide explains what the list covers. Our inverter library badges each model Synergy lists for the scheme.
Midea has four battery series on the register, from 4.6 kWh up to 82 kWh, and four hybrid lines. The PowerInfi brochure adds a 6.86 kWh usable module in an IP66 (dust-tight and protected against powerful water jets) case. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. No Midea inverter is listed for battery storage under the WA Battery Scheme on Synergy's approved list as of 30 October 2026.
Ask which Midea line is quoted, and for the battery and inverter codes. Ask for the Midea warranty policy for Australia in writing.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Batteries | LFP (lithium iron phosphate), 4.6-50 kWh usable |
|---|---|
| Approved now | 36 batteries and 4 inverters on the CEC (Clean Energy Council) register |
| Where to buy in Perth | We have not found a Perth supplier or a price yet. |
| Local support | Yes, support handled through Australian channelsSource: Australian warranty, checked 15 Oct 2026Confirmed |
| Local warranty claims | Australian contact on record. Confirm the claim process with your installerListed |
| CEC listings | 40 approved right now · 0 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed Midea inverters in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare inverters from other brands
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
36 CEC-approved batteries · grouped into 28 series
Grouped by series. Open a series for each variant, or a model for full specs.
4 CEC-approved inverters
What has happened to Midea on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
🔋 5 Battery Listings
Battery range expanded to 5 CEC-approved listings.
The register names three. One Midea firm makes the H1, and another the LV Residential ESS. Hiconics makes the MEBC2 and the MD-BS.
Midea's Australian brochure gives the BAT 7.0 module 7.03 kWh rated and 6.86 kWh usable.
The brochure prints 8000 cycles at room temperature, to 70% of capacity. The warranty policy's limit is 8,000 cycles for the MEBC2-B14H-Pro series, or 120 months if that comes first.
Midea's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 36 CEC-approved Midea battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
Midea has 4 CEC-approved inverter models from 5-10 kW (three phase). Compare them against other brands by size, phase and battery compatibility.
4 of Midea's 4 inverter models are hybrid inverters, which connect a home battery directly. Confirm which batteries each model supports with your installer.
Are you Midea?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.