Batteries2 listed
- Approved models
- 2
- Usable capacity
- 13.6-15 kWh
- Chemistry
- LFP
FranklinWH · manufacturer profile
The aPower X and the aGate that runs it
Solar manufacturer
Updated 3 November 2026 · Checked against FranklinWH's Australian warranty, system datasheet and installation guide, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
FranklinWH sells a home battery system in two parts. The aPower X is the battery, with its own inverter inside. The aGate is the controller that runs it and moves the home onto backup. The aPower X-02-AU holds 15 kWh you can use, from lithium iron phosphate (LFP) cells, and gives 5 kW per unit. The Australian warranty runs 12 years, with at least 70% of capacity kept, when the system is registered, fitted by a FranklinWH-certified installer and kept online. FranklinWH Australia Pty Ltd, in Macquarie Park, is the importer. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, FranklinWH's listings for the WA Battery Scheme are the aPower X series.
Specifications and pricing change. Confirm them with the manufacturer.
The company
FranklinWH Technologies Co., Ltd. makes the aPower X battery and the aGate controller, and its datasheet gives China as the country of manufacture. In Australia, the importer is FranklinWH Australia Pty Ltd, at Macquarie Park, NSW. Its Australian warranty covers systems installed in Australia and New Zealand.
Two aPower X models are on the Clean Energy Council (CEC) register, the X-01-AU and the X-02-AU, both approved on 12 May 2026. The register lists them as batteries and also as battery inverters, and each carries its own inverter.
The warranty sends a claim to the installer or reseller who sold the system first. If you can't reach them, FranklinWH handles it and may send its own service staff or a partner.
From FranklinWH's Australian warranty, effective June 2026, read 3 November 2026.
A FranklinWH system has three parts: the aPower X battery, the aGate X-01-AU controller and the FranklinWH app. The aGate sits between the grid, the switchboard and the batteries, and it has its own inputs for solar. The datasheet names three ways it can run: self-consumption, time of use and emergency backup. The maker is FranklinWH Technologies Co., Ltd., and the datasheet gives China as the country of manufacture.
The aPower X is AC-coupled (its inverter is inside the battery). It connects through the aGate, beside the existing solar inverter rather than in its place. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations.
Two add-ons plug into the aGate. A smart circuits module gives the system two circuits it can switch on and off. A generator module adds an input for a backup generator. Both are optional, and the Australian warranty covers each for the same 12 years as the battery.
Two batteries, one controller and two add-on modules make up the FranklinWH range on this page. Both batteries are on the CEC register, approved on 12 May 2026.
15 kWh usable, lithium iron phosphate cells, 5 kW per unit, with its own inverter inside
CEC approved
The smaller aPower X, with 13.6 kWh usable and 14.336 kWh rated
CEC approved
The controller and backup switch, with two solar inputs. The datasheets give up to 225 kWh of X-02-AU batteries or 204 kWh of X-01-AU batteries.
Part of every system
Optional add-ons for the aGate: two switchable circuits, or a backup generator input
Optional
Each aPower X-02-AU stores 16 kWh, and 15 kWh of that is usable. It gives 5 kW of steady output, and up to 10 kW for 10 seconds. That short burst can help when a pump or an air conditioner starts. Four units together give up to 20 kW of steady output. The datasheet puts the storage limit at 225 kWh on one aGate, and asks you to contact FranklinWH before going past four units.
The battery and its power electronics are rated IP67 (a rating for dust and water protection), and the wiring compartment is IP56. The unit is rated for indoor or outdoor use, from -20 °C to 50 °C. It is 1,150 mm tall, 750 mm wide and 290 mm deep, and it weighs 185 kg. It mounts on a wall or stands on the floor, and the installation guide recommends the floor. The guide also says the site should be protected from direct sunshine. The warranty does not cover damage from direct exposure to sunlight, so ask the installer where it would go.
There is also a smaller model, the aPower X-01-AU. Its own datasheet gives 13.6 kWh usable from 14.336 kWh rated, and up to 204 kWh on one aGate. It gives the same 5 kW rating, size and weight as the X-02-AU.
The aPower X-02-AU uses lithium iron phosphate cells, and its battery and power converter are rated IP67. The datasheet lists the standards the system is certified to. They include IEC 62109-1 and IEC 62109-2 for inverter safety, and AS/NZS 4777.2 for connecting to the grid in Australia.
FranklinWH describes the casing as all metal. It also says each unit is tested on its own, rather than in batches.
FranklinWH's installation guide V1.2.07 was issued in May 2026 and covers both the X-01-AU and the X-02-AU. It asks for the air around the battery to stay at 50 °C or below, with nothing flammable nearby and the vents kept clear. It also says only FranklinWH-certified and qualified technicians should install or service the system.
FranklinWH's Australian warranty, effective June 2026, covers the aPower X, the aGate and both add-on modules for 12 years from the day of installation. The energy meters get 2 years. The aGate's communications module gets up to 5 years.
The battery is promised to keep at least 70% of its rated capacity, which is 15 kWh on the X-02-AU. That promise runs to 12 years, or until the battery has put through its energy limit, if that comes sooner. The cover for defects runs the full 12 years. That limit is 60 MWh (megawatt-hours, each a thousand kilowatt-hours) for the X-02-AU and 43 MWh for the X-01-AU.
Three conditions shape the cover. The system has to come from an authorised reseller and be fitted by a FranklinWH-certified installer. It has to be registered when it is installed, or the cover is four years. And it has to stay online, so FranklinWH can update the software. If it is offline for more than 90 days in a row and the link is not restored, the cover drops to four years.
A claim starts with the installer or reseller who sold the system. If you can't reach them, FranklinWH handles the claim itself and may send its own service staff or a partner. Report a fault within two weeks of finding it, and keep the proof of purchase and the serial number.
The warranty is the guide we have. It promises 70% of capacity at 12 years, or at the energy limit if that comes first. We have not seen a cycle figure for the cells, so this page prints none.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, FranklinWH's listings for the WA Battery Scheme are the aPower X series.
The WA Battery Scheme looks at the inverter on the quote. With FranklinWH, that inverter is inside the aPower X, so the aPower X model code is the one that counts. Our inverter library badges each model Synergy lists for the scheme. Other scheme conditions apply, so ask the installer to set them out in writing.
FranklinWH's inverters on Synergy's list are not yet marked activation-ready for a Synergy VPP program (list dated 30 October 2026). To claim the WA rebate, the home also signs up to a virtual power plant (VPP), a program where a retailer can draw on many home batteries at once. In WA that can be Synergy's Battery Rewards, or a VPP the battery supplier runs on terms of its own. For an aPower X, ask the installer which program it would join.
The WA battery rebate page has the rest of the scheme's rules. Our Synergy approved products guide explains what the list covers.
The warranty only applies to a system bought from an authorised reseller and fitted by a FranklinWH-certified installer. So ask an installer early whether FranklinWH has certified them. We have not seen a list of Perth installers or a price. FranklinWH's Australian phone line and email are in the support section, and they are the place to ask who is certified near you.
A FranklinWH system is a battery with its own inverter inside, run by a separate controller, the aGate. Each aPower X-02-AU holds 15 kWh you can use. The warranty runs 12 years when the system is registered, kept online, and bought and fitted through an authorised reseller and a FranklinWH-certified installer. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. On Synergy's list dated 30 October 2026, FranklinWH's listings for the WA Battery Scheme are the aPower X series.
Ask whether the installer is certified by FranklinWH, and get the answer in writing, because the warranty depends on it. Get the aPower X model code on the quote. If backup matters, agree which circuits the aGate keeps on in a blackout.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 12 years on the aPower X, aGate and add-on modules; at least 70% of capacity at 12 years or the energy limitFranklinWH's Australian warranty, effective June 2026 |
|---|---|
| Batteries | LFP (lithium iron phosphate), 13.6-15 kWh usable |
| Approved now | 2 batteries and 2 inverters on the CEC (Clean Energy Council) register |
| Where to buy in Perth | From an authorised reseller, fitted by a FranklinWH-certified installer. Who to ask |
| Support in Australia | Office and phone line. Contact details |
| Local support | Yes, support handled through Australian channelsSource: Australian warranty, checked 3 Nov 2026Confirmed |
| CEC listings | 4 approved right now · 0 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed FranklinWH inverters in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare inverters from other brands
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
2 CEC-approved batteries
Grouped by series. Open a series for each variant, or a model for full specs.
What has happened to FranklinWH on the CEC register.
No register events recorded for this year.
FranklinWH Australia Pty Ltd, in Macquarie Park, NSW, is the importer named on the Australian warranty. The maker is FranklinWH Technologies Co., Ltd. A claim goes to your installer or reseller first, then to FranklinWH.
Yes, for the full warranty. The system has to stay online so FranklinWH can update its software. If it stays offline for more than 90 days in a row and the link is not restored, the cover drops to four years.
Twelve years from installation on the aPower X, the aGate and the add-on modules, with at least 70% of battery capacity kept. The 70% promise ends sooner if the battery reaches its energy limit: 60 megawatt-hours on the X-02-AU and 43 on the X-01-AU.
The aPower X is AC-coupled (its inverter is built in), so it joins beside a solar inverter instead of replacing it. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations.
FranklinWH's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Solar Battery Perth lists 2 CEC-approved FranklinWH battery models with specs, indicative pricing and warranty detail. Compare them against other brands to find the best fit for your Perth home.
FranklinWH has 2 CEC-approved inverter models from 5 kW (single phase). Compare them against other brands by size, phase and battery compatibility.
2 of FranklinWH's 2 inverter models are battery inverters, which run a home battery directly. Confirm which batteries each model supports with your installer.
Are you FranklinWH?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.