Batteries56 listed
- Approved models
- 47
- Usable capacity
- 3.8-47.9 kWh
- Pair with an inverter listed for battery storage on Synergy's list
- 43 of 56 systems
- Warranty
- 10 years · terms listed for 1 of 56 models
- Chemistry
- LFP
- Backup capable
- 1 of 56 models
Alpha ESS · manufacturer profile
The SMILE-M and SMILE-G3 ranges
Battery manufacturer
Updated 12 November 2026 · Checked against Alpha ESS's Australian datasheets and the 1 July 2026 warranty terms, the CEC register (16 November 2026) and Synergy's list (30 October 2026) · By Solar Battery Perth
In short
Alpha ESS makes home batteries together with the inverters that run them. The SMILE-M puts 5 kWh or 13.99 kWh modules under a 5 to 10 kW single-phase inverter. The SMILE-G3 stacks 9.3 kWh modules in a tower under single-phase or three-phase hybrids. Each range has a battery inverter, a unit that runs only the battery. It can work alongside the solar inverter a home already has, subject to WA's rules for adding a battery. The warranty terms dated 1 July 2026 give 10 years on the modules and on the inverters they list, on condition the system stays online. Alpha ESS Australia Pty Ltd in Homebush West, Sydney, is the warranty provider a claim reaches. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Every current SMILE-M and SMILE-G3 inverter was on Synergy's list dated 30 October 2026. A SMILE battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Specifications and pricing change. Confirm them with the manufacturer.
The company
Alpha ESS builds the battery and the inverter as one system, and that is the whole shape of its range. Alpha ESS says it was established in Nantong, in China's Jiangsu province, in 2012. The maker named on the warranty, Alpha ESS Co., Ltd, is still based there.
In Australia the warranty provider is Alpha ESS Australia Pty Ltd in Homebush West, Sydney. Alpha ESS says its Australian arm was set up in 2015. The 1 July 2026 terms name that Sydney company as the provider, so a warranty claim lands with an Australian company.
A claim goes through Alpha ESS's online complaint portal or by email to its Australian technical support address. The owner contacts the installer, the reseller or Alpha ESS as soon as practicable. A claim may be rejected or limited if it is not reported within four weeks of becoming aware of the fault and the delay hampers Alpha ESS's checks. The installer is expected to assist, and a replaced product goes back within 10 working days.
From the Alpha ESS warranty terms, version 4.0, 1 July 2026, read 16 October 2026.
Two shapes of system, and a way to work alongside the inverter you have, subject to WA's rules for adding a battery. In the SMILE-M the inverter sits on top of the battery, so the whole thing is one column on the floor. In the SMILE-G3 the 9.3 kWh modules stack into a tower, up to three in a column, with the hybrid beside it.
Each range includes a battery inverter. The SMILE-M5-B and the SMILE-G3-B5 connect on the house's AC wiring rather than to the panels, so the existing solar inverter stays in place. The register lists both as battery-only inverters. No Alpha ESS document we read names other brands' solar inverters as compatible. The warranty excludes faults caused by non-approved inverters. So the pairing with an existing inverter needs Alpha ESS's confirmation in writing. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations.
Every current SMILE-M5 and SMILE-G3 datasheet lists a built-in aerosol fire suppression feature. No test report we read describes it, so this page prints the feature and nothing more. Every module is rated at 100% depth of discharge (the share of the battery you are allowed to drain). So the label figure is the usable figure.
The current SMILE-M and SMILE-G3 modules and inverters are on the Clean Energy Council (CEC) register in our 20 October 2026 snapshot. The SMILE-M-BAT-5P builds were approved on 17 June 2025. The SMILE-M-BAT-13.9P builds followed on 24 July 2025, and the SMILE-G3-BAT-9.3S builds on 17 November 2025. Each is listed to 31 December 2027. The inverters were approved between June 2025 and July 2026. Earlier SMILE lines stay on the register beside them, the SMILE5 and SMILE-B3 among them.
Single-phase hybrid, 5 kW, two MPPTs (the trackers that get the most out of each string of panels), IP65, sits on top of the battery
CEC approved
Single-phase battery inverter, 5 kW, 5 kVA backup, under 10 ms switch
CEC approved
Single-phase hybrids, 8 to 10 kW, four MPPTs, for the 13.99 kWh module only
CEC approved
5 kWh LFP module, 50 kg, IP65, one to six with a SMILE-M5, up to four in one floor-mounted column or two on a wall
CEC approved
13.99 kWh LFP module, 108 to 115 kg (Alpha ESS documents differ), IP65, one or two under a SMILE-M, listed from 13.99 to 55.99 kWh
CEC approved
Single-phase hybrid and battery inverter, 5 kW, 5,000 VA backup
CEC approved
Three-phase hybrids, 5 to 20 kW, three MPPTs
CEC approved
9.3 kWh LFP module, 81 kg, IP65, stacked in a tower
CEC approved
The SMILE-M is a column with the inverter on top. With a SMILE-M5-S hybrid it takes one to six 5 kWh modules, which is 5 to 30 kWh, but not all in one column. The SMILE-M5 manual allows up to four in one floor-mounted column, or two wall-mounted, and recommends two columns past four. Or it takes one or two 13.99 kWh modules, which is 13.99 to 27.98 kWh. The larger SMILE-M8, M9 and M10 hybrids take the 13.99 kWh module only, one or two of them.
The inverters set the power. The SMILE-M5-S runs 5 kW with two MPPTs and takes up to 10 kW of panels. The M8, M9 and M10 run 8, 9 and 10 kW with four MPPTs and take 16 to 20 kW of panels. Their backup ports carry 8, 9 and 10 kVA (kVA is the rating the datasheet uses for backup output). In Australia the M10's grid port is set to 9.999 kVA.
Backup depends on the inverter. The SMILE-M5-B battery inverter switches to backup in under 10 ms and carries 5 kVA. The SMILE-M5-S datasheet lists a backup function but prints no switch time, so this page gives none for it.
The 13.99 kWh module weighs 108 to 115 kg (Alpha ESS documents differ) and stands on the floor, secured to the wall with a bracket, with up to two in one column. The 5 kWh module weighs 50 kg; its stack stands on the floor as standard, and up to two can go on a wall. Three or more on the floor need a lift, and a floor prone to standing water needs a platform. Both modules are rated IP65 (dust-tight and protected against water jets). The 5P charges between 0°C and 50°C and the 13.9P works from -10°C to 50°C, with 15°C to 30°C recommended.
The SMILE-G3 is a tower of 9.3 kWh LFP (lithium iron phosphate) modules. On the single-phase SMILE-G3-S5 hybrid or G3-B5 battery inverter it takes one to four modules, 9.3 to 37.2 kWh. On the three-phase T5 and T10 it takes one to six, up to 55.8 kWh, and on the T15 and T20 two to six, 18.6 to 55.8 kWh.
The S5 and B5 run 5 kW, with a 5,000 VA backup port. The S5 takes up to 10 kW of panels on two MPPTs; the B5 has no panel input at all. The T5 and T10 run 5 and 10 kW with 5,000 and 10,000 VA backup ports and three MPPTs. The T15 and T20 run 15 and 20 kW with 15,000 and 20,000 VA backup and take up to 30 kW of panels.
Each module weighs 81 kg, and the installation guide asks for two people. Up to three modules stand in one column, with a limit of four batteries on a single-phase system and six on three-phase. It is rated IP65 and works from -20°C to 50°C, with 15°C to 30°C recommended. A floor prone to standing water needs a raised platform.
Two earlier SMILE-G3 modules stay on the register beside the 9.3S, and older homes may have one. The SMILE-G3-S3.6 hybrid, rated 3,680 W, pairs with the SMILE-G3-BAT-4.0S, which gives 3.8 kWh usable. The SMILE-G3-B5 pairs with the SMILE-G3-BAT-10.1P, which gives 9.6 kWh usable. Both work to 95% depth of discharge. A single 4.0S is smaller than the WA scheme's minimum battery size.
The SMILE-M-BAT-5P and SMILE-M-BAT-13.9P pair with the SMILE-M5-S hybrid and the SMILE-M5-B battery inverter. The 13.9P also pairs with the SMILE-M8, M9 and M10. The SMILE-G3-BAT-9.3S pairs with the G3-S5, G3-B5 and the G3-T5 to T20. Each pairing is read from the inverter's own Australian datasheet, which lists its battery modules.
The battery inverters are the route for a home with solar already on the roof. The M5-B and G3-B5 are AC-coupled (they connect on the house wiring rather than to the panels). No Alpha ESS document we read names which other brands' solar inverters they sit beside, so ask for that pairing confirmed in writing before installation. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations.
Every current SMILE module uses LFP cells, the chemistry the register records for them. The modules are rated IP65. Every current SMILE-M5 and SMILE-G3 datasheet lists a fast-suppression aerosol fire feature among its key features, and no test report we read describes it.
The terms dated 1 July 2026 apply to systems installed in Australia from that date, bought through Alpha ESS or an authorised channel. They give 10 years of product and performance cover on every current battery module. They give 10 years of product cover on the inverters they list. The SMILE-M8, M9 and M10 inverters carry 10 years under their own terms dated 30 January 2026. The SMILE-G3-T models and the SMILE-M5-B print 10 years on their datasheets. They are not named in the 2026 terms' table, so a quote for one should say which document covers it.
The years start on the installation date recorded in the monitoring platform, the commissioning date or first energisation, whichever comes first. If none can be verified, they start six months after manufacture or shipment. The capacity promise is at least 70% of warranted usable capacity for 120 months. It ends sooner if a set amount of energy has passed through first.
That energy allowance differs by module. The 13.99 kWh and 9.3 kWh modules carry 3.8 MWh (megawatt-hours, or 3,800 kWh) per kWh of capacity. That is 3,800 full cycles, so at one full cycle a day the 10 years arrive first. The 5 kWh module carries 3.12 MWh per kWh, which is 3,120 cycles. At one full cycle a day that runs out after about 8.5 years.
Staying online is the main condition. If the system has no connection for 30 consecutive days, or 90 days in total, before a claim, the 10-year cover drops to 3 years. That does not apply where the product itself caused the loss of connection. The cover also holds only in an approved use: self-consumption, time of use, backup, grid service and AI mode. Each product has to run within the temperature range on its datasheet.
Costs are split. Alpha ESS covers replacement parts and standard freight to the site. Labour, travel, access equipment, removal and reinstallation are covered only where approved in writing before they are incurred, or where the law requires it. Faults caused by moisture, flooding, salt, corrosion, excessive heat, direct sunlight or poor ventilation are excluded, and so are faults from non-approved inverters. The warranty sets no distance from the coast, but the manuals do: five Alpha ESS installation manuals, the Australian 13.9P manual among them, rule out outdoor mounting within 500 m of the coast or anywhere prone to sea breeze.
A claim goes through the online portal or the support email, as the Support section describes. The cover passes to the next owner of the building while the product stays put. The terms add to your rights under the Australian Consumer Law. New South Wales law governs them.
A system installed before 1 July 2026 sits under earlier terms, and they differ. The 2022 terms promised 80% of usable capacity for 120 months on the SMILE-G3-BAT-10.1P. That promise held only until 2.92 MWh per kWh of usable capacity had passed through the battery. Alpha ESS's 2023 datasheets for the SMILE-G3-S3.6 and G3-B5 disagree: some print a 5-year product term, one prints 10 years. A quote should say which terms apply.
The warranty answer under the 2026 terms is 10 years, with 70% of warranted usable capacity promised for that long, unless the energy allowance runs out first. On the 13.99 kWh and 9.3 kWh modules the allowance lasts the full 10 years at one full cycle a day. On the 5 kWh module it runs out after about 8.5 years at that rate. No Alpha ESS datasheet we read prints a lab cycle rating for the current modules.
Showing: Western Australia, Synergy network. Other states: not covered yet
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Every current SMILE-M and SMILE-G3 inverter was on Synergy's list dated 30 October 2026. A SMILE battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Synergy's list names inverters, not batteries. A SMILE battery counts through the Alpha ESS inverter on the quote, whether that is a hybrid or one of the battery inverters. The exact inverter model code on the quote is the one that counts. Our inverter library badges each model Synergy lists for the scheme.
Alpha ESS's inverters on Synergy's list are marked activation-ready for a Synergy VPP program (list dated 30 October 2026). The WA scheme also needs the home to be in a virtual power plant (VPP), a program that lets a retailer draw on home batteries. Synergy's is called Battery Rewards, and a battery supplier's VPP is accepted too, on its own conditions. One Alpha ESS condition sits on top. Its 1 July 2026 terms cover grid service only in a VPP that Alpha ESS has approved. So ask whether the VPP on the quote is one of them.
What else the scheme requires is on our WA battery rebate page. How Synergy's list works is set out in our Synergy approved products guide.
An Alpha ESS system is a SMILE inverter with SMILE modules under it or stacked beside it, so the quote has to name both. The SMILE-M grows in 5 kWh or 13.99 kWh modules under a single-phase inverter. The SMILE-G3 grows in 9.3 kWh modules, on single-phase or three-phase. A home keeping its solar inverter adds a SMILE-M5-B or G3-B5 battery inverter, with the pairing confirmed in writing. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations. The warranty excludes a spot in direct sunlight or with poor ventilation, and it asks the system to stay online. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Every current SMILE-M and SMILE-G3 inverter was on Synergy's list dated 30 October 2026. A SMILE battery on one of them pairs with an inverter listed for battery storage on Synergy's list.
Ask the installer for the inverter and the modules, each by model code. Ask which warranty document covers each one. If the quote keeps your existing solar inverter, get Alpha ESS's written confirmation of the pairing. The installer's quote sets the price. The module count, inverter and warranty document are the parts to check against this page.
Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. Installers quote the actual price.
For checking
| Warranty | 10 years on the current modules and the inverters the 2026 terms list, on condition the system stays onlineAlpha ESS warranty terms, version 4.0, 1 July 2026 |
|---|---|
| Batteries | LFP (lithium iron phosphate), 3.8-47.9 kWh usable |
| Approved now | 47 batteries and 35 inverters on the CEC (Clean Energy Council) register |
| Support in Australia | Office. Contact details |
| Local support | Yes, support handled through Australian channelsSource: Australian warranty, checked 16 Oct 2026Confirmed |
| CEC listings | 82 approved right now · 17 delistedApproved |
| Documents |
Each product type at a glance. The full lists, grouped by series, are below.
We haven't reviewed Alpha ESS inverters in depth yet. We don't hold warranty terms or a series review for them, so confirm those with your installer. Compare inverters from other brands
Pick a type to open its full list, grouped by series.
Grouped by series. Open a series for each variant, or a model for full specs.
47 CEC-approved batteries, 9 not currently listed · grouped into 22 series · showing first 50 of 56
SMILE-BAT-10.1P
SMILE-BAT-13.3P
SMILE-BAT-14P
SMILE-BAT-14P II
SMILE-BAT-14P III
SMILE-BAT-15P
SMILE-BAT-15P II
SMILE-BAT-15P III
SMILE-BAT-5P
SMILE-BAT-8.2 PH
SMILE-BAT-8.2 PH II
SMILE-BAT-8.2 PH III
SMILE-BAT-8.2 PH IV
SMILE-BAT-8.2 PH V
SMILE-BAT-8.2 PH VI
SMILE-BAT-10.3P
Based on manufacturer specifications and CEC-approved configurations. Always confirm system design with your installer.
Grouped by series. Open a series for each variant, or a model for full specs.
35 CEC-approved inverters, 8 not currently listed · grouped into 43 series
What has happened to Alpha ESS on the CEC register.
Each block is one register event. Tap a year to see its events in the list below.
SMILE5 Battery System Launch
All-in-one 5kWh energy storage system launched in Australia
⚡ 20 Inverter Models Listed
Inverter range expanded to 20 CEC-approved models.
🔋 50 Battery Listings
Battery range expanded to 50 CEC-approved listings.
Alpha ESS says it was established in Nantong, China, in 2012. The maker named on the warranty, Alpha ESS Co., Ltd, is based in Nantong. The warranty provider for Australia is Alpha ESS Australia Pty Ltd in Homebush West, Sydney. So a claim lands with an Australian company.
Usually, yes, through a battery inverter. The SMILE-M5-B and SMILE-G3-B5 connect on the house wiring rather than to the panels, so the solar inverter stays. In WA, adding a battery to an existing solar system counts as an alteration and can trigger whole-of-site compliance, so compare an AC-coupled retrofit against replacing your inverter with a hybrid. For many existing systems the sound path is replacing toward a DC-coupled / hybrid-inverter setup rather than expanding an AC-coupled one, avoiding future compliance limitations. No Alpha ESS document we read names which other brands' inverters they sit beside. The warranty also excludes faults from non-approved inverters. So get the pairing confirmed in writing.
The module counts set the limits. A SMILE-M5 takes one to six 5 kWh modules, with at most four in one floor-mounted column or two on a wall. Or it takes two 13.99 kWh modules. A SMILE-G3 takes up to four or six 9.3 kWh modules, depending on the inverter. No Alpha ESS document we read sets a time limit on adding a module. Have the installer confirm the plan in writing.
Under the 2026 terms, 70% of warranted usable capacity is promised for 10 years, or until the energy allowance is used up. At one full cycle a day the 10 years arrive first on the 13.99 kWh and 9.3 kWh modules. On the 5 kWh module the allowance runs out after about 8.5 years at that rate.
A claim goes through Alpha ESS's online complaint portal or its Australian support email, and the installer is expected to assist. Report a fault within four weeks of becoming aware of it. The provider behind the terms is Alpha ESS Australia Pty Ltd in Homebush West, Sydney.
The modules are rated IP65, and the 13.9P and 9.3S work from -10°C and -20°C up to 50°C. The warranty excludes faults caused by direct sunlight, moisture, salt or poor ventilation, so a covered spot out of the sun is the one the terms describe. The installation manuals also rule out outdoor mounting within 500 m of the coast or anywhere prone to sea breeze.
Alpha ESS is headquartered in Nantong, Jiangsu, China. Its products are sold in Australia through SAA-accredited installers.
Alpha ESS's home batteries use LFP cells. LFP (lithium iron phosphate) is the most common residential chemistry in WA for its long cycle life and stability in Perth's heat.
Are you Alpha ESS?
Help us keep this profile up to date.
How the WA Battery Scheme works, and why eligibility follows the inverter on the quote.
What Synergy's Supported Solutions List covers, and how our inverter library shows which models are on it.
How the inverter paired with a battery sets its charge rate, discharge rate and backup power.
Who to contact first when a home battery fails, and what records to keep.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.
Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.