Hybrid inverter · Xiamen Well Energy Technology · CEC approved September 2026
CEC listing: CGS S6.0 6H6 (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Xiamen Well Energy Technology CGS S6.0 6H6, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98.5% |
| Physical | |
| Dimensions (H×W×D) | 629 × 647 × 252 mm |
| Weight | 45 kg |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Xiamen Well Energy Technology CGS S6.0 6H6 against the closest-power inverters from other brands.
| Specification | Xiamen Well Energy Technology CGS S6.0 6H6Xiamen Well Energy Technology | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | 98.5% | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
SUNGROW offers a 10-year warranty against defects for residential products, excluding damages from improper installations. To make a claim, contact your installer with proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.
DSP-B-FAULTcriticalCall your installerCommunication failure between main and slave DSP
ILeak-PRO 01/02/03/04criticalCall your installerLeakage current protection activated
INI-FAULTcriticalCall your installerInitialization system fault
OV-DC01/02/03/04criticalCall your installerOver DC voltage
PVISO-PROcriticalCall your installerEarth fault detected on the PV side
Screen OFF with DC appliedcriticalCall your installerInverter internally damaged
OV-G-F01/02warningOver grid frequency
OV-G-V01/02/03/04warningCall your installerOver grid voltage
OV-TEMwarningOver temperature
UN-G-F01/02warningUnder grid frequency
UN-G-V01/02warningUnder grid voltage
CGS S6.0 6H1 (AS4777-2 2020)
6 kW · 1φ
CGS S6.0 6H2 (AS4777-2 2020)
6 kW · 1φ
CGS S6.0 6H3 (AS4777-2 2020)
6 kW · 1φ
CGS S6.0 6H4 (AS4777-2 2020)
6 kW · 1φ
CGS S6.0 6H5 (AS4777-2 2020)
6 kW · 1φ
CGS S6.0 6H7 (AS4777-2 2020)
6 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.