Loading Solar Battery Perth...

Hybrid inverter · Wuxi Solinteg Power · Integ M Series series · CEC approved June 2026

Wuxi Solinteg Power MHS-8K-30

CEC listing: MHS-8K-30 (AS4777-2 2020)

An 8 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Integ M Series series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
MPPT trackers 2 roof faces can be tuned independently: 2
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Wuxi Solinteg Power Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Wuxi Solinteg Power MHS-8K-30, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	8 kW
Maximum power	8 kW
Apparent power	8 kVA
Efficiency
Max efficiency	97.6%
DC input & MPPT
MPPT trackers	2
Max input voltage	600 V
MPPT voltage min	100 V
MPPT voltage max	550 V
Max input current	15 A
Battery & backup
Battery compatible	Yes
Backup capable	Yes
Continuous backup	8 kW
Physical
Dimensions (H×W×D)	418 × 534 × 210 mm
Weight	27 kg
IP rating	IP65
Cooling	Natural Convection
Operating temperature	-30°C to 60°C

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 June 2026

Approval expiry

25 July 2028

Status

Active

Eligible for rebates

Yes

About Wuxi Solinteg Power Co Ltd

Years in AU Market

1 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The Wuxi Solinteg Power MHS-8K-30 against the closest-power inverters from other brands.

Specification	Wuxi Solinteg Power MHS-8K-30Wuxi Solinteg Power	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	2	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Wuxi Solinteg Power MHS-8K-30

This warranty covers defects in materials and workmanship for solar products. Key exclusions include damage from improper installation and environmental factors like floods.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Improper installation by non-professionals, failure to comply with safety instructions, damage from extreme natural events (e.g., fire, storm), unauthorized modifications, use in non-compliant environments.
Environment limits: Not specified

Read the official warranty document (PDF)

Fault & error codes — Wuxi Solinteg Power MHS-8K-30

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

GFCI FaultcriticalCall your installer
Manual (PDF)
Ground leakage current exceeds the limitation.
Likely cause
Faulty PV panels or cables.
What to do
Restart the inverter and check for damages.
ISO Over LimitationcriticalCall your installer
Manual (PDF)
DC side insulation impedance to the ground is too low.
Likely cause
Damaged PV panels or connections.
What to do
Check PV panels and connections for water damage, and measure ground resistance.
N-PE Check FaultcriticalCall your installer
Manual (PDF)
Ground cable is loose or poorly connected.
Likely cause
Bad ground wiring.
What to do
Verify ground cable connections.
PV Over VoltagecriticalCall your installer
Manual (PDF)
PV input voltage exceeds the upper limit.
Likely cause
Too many PV panels connected.
What to do
Reduce number of PV panels to ensure voltage within limits.
Relay Check FailcriticalCall your installer
Manual (PDF)
Internal relay self-check failed due to connection issue.
Likely cause
Bad neutral and ground cable connections.
What to do
Measure voltage between N & PE cables and restart the inverter.
Bus Voltage FaultwarningCall your installer
Manual (PDF)
Bus circuit voltage is too high.
Likely cause
Excessive input voltage.
What to do
Check input voltage and restart the inverter.
DCI FaultwarningCall your installer
Manual (PDF)
Direct current injection value exceeds the tolerated range.
Likely cause
Faulty inverter operation.
What to do
Restart the inverter and seek help if repeated.
Grid Frequency FaultwarningCall your installer
Manual (PDF)
Grid frequency is higher or lower than the set protection value.
Likely cause
Issues with the local grid frequency.
What to do
Check AC cable connections and verify if allowed to switch countries.
Grid Voltage FaultwarningCall your installer
Manual (PDF)
Grid voltage exceeds the limit of selected safety set range.
Likely cause
Incorrect safety code or faulty AC cable wiring.
What to do
Ensure safety code is correct and replace AC cable if needed.
Inverter Over TemperaturewarningCall your installer
Manual (PDF)
High internal inverter temperature detected.
Likely cause
Poor ventilation during operation.
What to do
Ensure proper ventilation or turn off until cool.
Mains Lostwarning
Manual (PDF)
Grid power outage, AC switch or circuit is disconnected.
Likely cause
Loss of power supply from the mains.
What to do
Check whether the mains supply is lost and ensure AC breaker and terminal connections are secure.

Part of the Wuxi Solinteg Power Integ M Series series

Compare every Wuxi Solinteg Power Integ M Series variant side by side →

More Wuxi Solinteg Power Co Ltd Inverters

M2HT-25K-150 (AS4777-2 2020)

25 kW · 3φ

M2HT-29.9K-150 (AS4777-2 2020)

29.9 kW · 3φ

M2HT-30K-150 (AS4777-2 2020)

30 kW · 3φ

M2HT-40K-150 (AS4777-2 2020)

40 kW · 3φ

M2HT-50K-150 (AS4777-2 2020)

50 kW · 3φ

MHS-3.6K-30 (AS4777-2 2020)

3.6 kW · 1φ

View all Wuxi Solinteg Power Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Wuxi Solinteg Power · Integ M Series series · CEC approved June 2026

Wuxi Solinteg Power MHS-8K-30

CEC listing: MHS-8K-30 (AS4777-2 2020)

An 8 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Integ M Series series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
MPPT trackers 2 roof faces can be tuned independently: 2
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Wuxi Solinteg Power Co Ltd stands behind it: 5yr

Full datasheet

Every figure on file for the Wuxi Solinteg Power MHS-8K-30, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	8 kW
Maximum power	8 kW
Apparent power	8 kVA
Efficiency
Max efficiency	97.6%
DC input & MPPT
MPPT trackers	2
Max input voltage	600 V
MPPT voltage min	100 V
MPPT voltage max	550 V
Max input current	15 A
Battery & backup
Battery compatible	Yes
Backup capable	Yes
Continuous backup	8 kW
Physical
Dimensions (H×W×D)	418 × 534 × 210 mm
Weight	27 kg
IP rating	IP65
Cooling	Natural Convection
Operating temperature	-30°C to 60°C

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 June 2026

Approval expiry

25 July 2028

Status

Active

Eligible for rebates

Yes

About Wuxi Solinteg Power Co Ltd

Years in AU Market

1 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

1 years in Australian market

How it compares

The Wuxi Solinteg Power MHS-8K-30 against the closest-power inverters from other brands.

Specification	Wuxi Solinteg Power MHS-8K-30Wuxi Solinteg Power	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	2	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	5 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

5-year inverter warranty

Wuxi Solinteg Power MHS-8K-30

This warranty covers defects in materials and workmanship for solar products. Key exclusions include damage from improper installation and environmental factors like floods.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Improper installation by non-professionals, failure to comply with safety instructions, damage from extreme natural events (e.g., fire, storm), unauthorized modifications, use in non-compliant environments.
Environment limits: Not specified

Read the official warranty document (PDF)

Fault & error codes — Wuxi Solinteg Power MHS-8K-30

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

GFCI FaultcriticalCall your installer
Manual (PDF)
Ground leakage current exceeds the limitation.
Likely cause
Faulty PV panels or cables.
What to do
Restart the inverter and check for damages.
ISO Over LimitationcriticalCall your installer
Manual (PDF)
DC side insulation impedance to the ground is too low.
Likely cause
Damaged PV panels or connections.
What to do
Check PV panels and connections for water damage, and measure ground resistance.
N-PE Check FaultcriticalCall your installer
Manual (PDF)
Ground cable is loose or poorly connected.
Likely cause
Bad ground wiring.
What to do
Verify ground cable connections.
PV Over VoltagecriticalCall your installer
Manual (PDF)
PV input voltage exceeds the upper limit.
Likely cause
Too many PV panels connected.
What to do
Reduce number of PV panels to ensure voltage within limits.
Relay Check FailcriticalCall your installer
Manual (PDF)
Internal relay self-check failed due to connection issue.
Likely cause
Bad neutral and ground cable connections.
What to do
Measure voltage between N & PE cables and restart the inverter.
Bus Voltage FaultwarningCall your installer
Manual (PDF)
Bus circuit voltage is too high.
Likely cause
Excessive input voltage.
What to do
Check input voltage and restart the inverter.
DCI FaultwarningCall your installer
Manual (PDF)
Direct current injection value exceeds the tolerated range.
Likely cause
Faulty inverter operation.
What to do
Restart the inverter and seek help if repeated.
Grid Frequency FaultwarningCall your installer
Manual (PDF)
Grid frequency is higher or lower than the set protection value.
Likely cause
Issues with the local grid frequency.
What to do
Check AC cable connections and verify if allowed to switch countries.
Grid Voltage FaultwarningCall your installer
Manual (PDF)
Grid voltage exceeds the limit of selected safety set range.
Likely cause
Incorrect safety code or faulty AC cable wiring.
What to do
Ensure safety code is correct and replace AC cable if needed.
Inverter Over TemperaturewarningCall your installer
Manual (PDF)
High internal inverter temperature detected.
Likely cause
Poor ventilation during operation.
What to do
Ensure proper ventilation or turn off until cool.
Mains Lostwarning
Manual (PDF)
Grid power outage, AC switch or circuit is disconnected.
Likely cause
Loss of power supply from the mains.
What to do
Check whether the mains supply is lost and ensure AC breaker and terminal connections are secure.

Part of the Wuxi Solinteg Power Integ M Series series

Compare every Wuxi Solinteg Power Integ M Series variant side by side →

More Wuxi Solinteg Power Co Ltd Inverters

M2HT-25K-150 (AS4777-2 2020)

25 kW · 3φ

M2HT-29.9K-150 (AS4777-2 2020)

29.9 kW · 3φ

M2HT-30K-150 (AS4777-2 2020)

30 kW · 3φ

M2HT-40K-150 (AS4777-2 2020)

40 kW · 3φ

M2HT-50K-150 (AS4777-2 2020)

50 kW · 3φ

MHS-3.6K-30 (AS4777-2 2020)

3.6 kW · 1φ

View all Wuxi Solinteg Power Co Ltd inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data