Battery inverter · Vilion New Energy Technology · CEC approved November 2026
CEC listing: MA1000K30 (AS4777-2 2020)
A 30 kW three-phase battery inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Vilion New Energy Technology MA1000K30, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 500 mm |
| Side clearance | 200 mm |
| AC breaker | 120 A |
| Cable gauge | 67 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
The Vilion New Energy Technology MA1000K30 against the closest-power inverters from other brands.
| Specification | Vilion New Energy Technology MA1000K30Vilion New Energy Technology | Afore AF30K-THAfore | Solplanet ASW030K-THSolplanet |
|---|---|---|---|
| Rated power? | 30 kW | 30 kW | 30 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Battery | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects for 10 years if installed correctly; misuse and unauthorized modifications void it. Claims must be made with proof of purchase and product details.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 19 of 19. The official install manual is the authoritative source — always confirm before acting.
01criticalCall your installerFan is locked when inverter is off.
02criticalCall your installerOver temperature
03criticalCall your installerBattery voltage is too high
04criticalCall your installerBattery voltage is too low
05criticalCall your installerOutput short circuited.
06criticalCall your installerOutput voltage is too high.
07criticalOverload time out
08criticalCall your installerBus voltage is too high
09criticalCall your installerBus soft start failed
10criticalCall your installerPV over current
11criticalCall your installerPV over voltage
12criticalCall your installerDCDC over current
13criticalCall your installerBattery discharge over current
51criticalOver current
52criticalCall your installerBus voltage is too low
53criticalCall your installerInverter soft start failed
55criticalCall your installerOver DC voltage in AC output
57criticalCall your installerCurrent sensor failed
58criticalCall your installerOutput voltage is too low
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.