Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · SolaX Power · X3 Hybrid series · CEC approval expired
CEC listing: X3-Hybrid-10.0-D (AS4777-2 2020)
A 10 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Every figure on file for the SolaX Power X3-Hybrid-10.0-D, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 10 kW |
| Maximum power | 12 kW |
| Apparent power | 12 kVA |
| Phases | 3 |
| Efficiency | |
| Max efficiency | 97.5% |
| European efficiency | 97.5% |
| CEC-weighted efficiency | 97.5% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 600 V |
| MPPT voltage min | 100 V |
| MPPT voltage max | 500 V |
| Max input current | 28 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 10 kW |
| Physical | |
| Dimensions (H×W×D) | 300 × 500 × 200 mm |
| Weight | 20 kg |
| IP rating | IP65 |
| Cooling | Natural |
| Operating temperature | -20°C to 60°C |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
29 June 2022
Approval expiry
26 June 2025
Status
Not listed
Eligible for rebates
No (not listed)
Years in AU Market
9 years
Australian Office
Not verified
CEC-Approved Batteries
39
CEC-Approved Panels
0
Category
Mid-Tier
Typical installed, inverter only
$3,150–$5,400
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The SolaX Power X3-Hybrid-10.0-D against the closest-power inverters from other brands.
| Specification | SolaX Power X3-Hybrid-10.0-DSolaX Power | Energizer Force 10.0HS+Energizer | Energizer Force 10.0HT+Energizer |
|---|---|---|---|
| Rated power? | 10 kW | 10 kW | 10 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | Not verified | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Warranty summary
The warranty covers defects in materials and workmanship for two years from the installation date. It does not cover damages from improper installation, failure to follow instructions, or environmental factors like excessive heat or moisture. To make a claim, contact customer support with the product serial number and a detailed description of the issue.
The warranty covers defects in materials and workmanship for two years from the installation date. It does not cover damages from improper installation, failure to follow instructions, or environmental factors like excessive heat or moisture. To make a claim, contact customer support with the product serial number and a detailed description of the issue.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the SolaX Power X3 Hybrid series
Compare every SolaX Power X3 Hybrid variant side by side →
X1-1.5-S-N(L) (AS4777-2 2020)
1.5 kW · 1φ
X1-2.0-S-N(L) (AS4777-2 2020)
2 kW · 1φ
X1-2.5K-S-N(L) (AS4777-2 2020)
2.5 kW · 1φ
X1-3.0K-S-N(L) (AS4777-2 2020)
3 kW · 1φ
X1-3.3K-S-N(L) (AS4777-2 2020)
3.3 kW · 1φ
X1-3.6K-S-N(L) (AS4777-2 2020)
3.68 kW · 1φ
Other CEC-approved products from SolaX Power available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.