Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. SolaX Power
  4. X1-SMT-10K-G2

Solar inverter · SolaX Power · CEC approved April 2024

SolaX Power X1-SMT-10K-G2

CEC listing: X1-SMT-10K-G2 (AS4777-2 2020)

A 10 kW single-phase solar inverter.

Rated power
10kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

X1-SMT-10K-G2: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
10kW
How much solar it can turn into usable power at once
Max efficiency
98.2%
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
Type
Solar
Runs solar only
Warranty
5yr
How long SolaX Power Network Technology (Zhe jiang) Co Ltd stands behind it

Full datasheet

Every figure on file for the SolaX Power X1-SMT-10K-G2, by section.

Full datasheet, by section
SpecificationValue
Power & output
Nominal power5 kW
Efficiency
Max efficiency98.2%
European efficiency97.5%
Physical
Dimensions (H×W×D)370 × 515 × 170 mm
Weight19.5 kg
IP ratingIP66
Installation requirements
AC breaker63 A
Cable gauge10 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
2 Apr 2024
Approval expiry
2 Apr 2027
Status
Active
Listed for STCs
Yes

About SolaX Power

Years on the CEC list
5 years
Australian office
Not verified
Category
Budget
CEC-approved inverters
137
CEC-approved batteries
39
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
42.5 kWh
Annual yield
15,511 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

5 years on the CEC list

How it compares

The SolaX Power X1-SMT-10K-G2 against the closest-power inverters from other brands.

Specification
SolaX Power X1-SMT-10K-G2SolaX Power
Solplanet ASW010K-SHSolplanet
Solplanet ASW10000-S-ASolplanet
Rated power?9.999 kW9.999 kW9.999 kW
Max efficiency?98.2%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeSolarHybridSolar
Battery readyNoYesNo
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • Datasheet and compliance certificatePDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guide and user manualPDF, opens in a new tab

5-year inverter warranty

SolaX Power X1-SMT-10K-G2

This warranty covers the inverter against defects in materials and workmanship for five years. Claims can be made by contacting customer support; however, the warranty does not cover damage from improper installation or environmental factors.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Warranty voids if the product is installed or modified by non-accredited personnel or not according to the manual.
Environment limits
The warranty does not cover damage caused by exposure to salt, extreme heat, or flooding.
Read the official warranty document (PDF)

Fault & error codes — SolaX Power X1-SMT-10K-G2

From the install manual

8 documented

Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.

  • IE: 0201criticalCall your installer
    Manual (PDF)

    Grid Lost Fault

    Likely cause
    Disconnection from the utility grid or cable issue.
    What to do
    Check if the mains cable is loose, wait for a while and the system will reconnect when the utility is back to normal.
  • IE: 0501criticalCall your installer
    Manual (PDF)

    PV Voltage Fault

    Likely cause
    PV Voltage exceeding the inverter's maximum input voltage.
    What to do
    Check if the PV is overvoltage; contact the installer for further assistance.
  • IE: 0601criticalCall your installer
    Manual (PDF)

    DC Bus Voltage Out of Normal Range

    Likely cause
    Irregularities in the DC Bus voltage possibly due to faulty connections.
    What to do
    Check if the PV input voltage is within the inverter's operating range, contact the installer if issues persist.
  • IE: 1601criticalCall your installer
    Manual (PDF)

    Earth Fault

    Likely cause
    A grounding issue that may expose the system to risks.
    What to do
    Check if the inverter is properly grounded; contact installer if uncertain.
  • IE: 0101warningCall your installer
    Manual (PDF)

    Over Current Fault

    Likely cause
    Potential voltage spike or overload condition in the inverter.
    What to do
    Wait for about 10 seconds to check if the inverter is back to normal, disconnect the DC switch and restart the inverter.
  • IE: 0301warningCall your installer
    Manual (PDF)

    Grid Voltage Out of Range

    Likely cause
    Voltage outside of operating parameters specified for the inverter.
    What to do
    Check if the voltage is within the operating range, wait for a while and the system will reconnect when the utility is back to normal.
  • IE: 0401warningCall your installer
    Manual (PDF)

    Grid Frequency Out of Range

    Likely cause
    Frequency variation from the normal grid frequency.
    What to do
    Check if the frequency is within the operating range, wait for a while and the system will reconnect when the utility is back to normal.
  • IE: 2201warningCall your installer
    Manual (PDF)

    Arc Fault

    Likely cause
    Detection of an arc in the system possibly due to faulty wiring.
    What to do
    Wait for 5 minutes. If the fault cannot be resolved, contact the installer.

More SolaX Power Network Technology (Zhe jiang) Co Ltd inverters

X3-MIC-10K-G2 (AS4777-2 2020)

9.999 kW · 1φ

X3-PRO-10K-G2 (AS4777-2 2020)

9.999 kW · 1φ

X1-VAST-10K (AS4777-2 2020)

9.999 kW · 1φ

X3-Hybrid-10.0-D (AS4777-2 2020)

10 kW · 1φ

X1-SMT-9K-G2 (AS4777-2 2020)

9 kW · 1φ

X1-IES-8K (AS4777-2 2020)

8 kW · 1φ

View all SolaX Power Network Technology (Zhe jiang) Co Ltd inverters

More from SolaX Power

Other CEC-approved products from SolaX Power available in Australia.

SolaX Power Batteries

AELIO-B100-AU

90 kWh · LFP

T-BAT HS10.8

9.9 kWh · LFP

T-BAT HS14.4

13.3 kWh · LFP

T-BAT HS18.0

16.5 kWh · LFP

T-BAT HS21.6

19.8 kWh · LFP

T-BAT HS25.2

23.2 kWh · LFP

View all SolaX Power batteries
View full SolaX Power manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?