Hybrid inverter · Sinosoar Hybrid Technology · CEC approved August 2026
CEC listing: SP30HBG2 (AS4777-2 2020)
A 30 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Sinosoar Hybrid Technology SP30HBG2, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 100 mm |
| AC breaker | 50 A |
| Cable gauge | 14 mm² |
| Earthing method | Properly grounded |
| DNSP pre-approval | No |
| Estimated install time | 10 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
The Sinosoar Hybrid Technology SP30HBG2 against the closest-power inverters from other brands.
| Specification | Sinosoar Hybrid Technology SP30HBG2Sinosoar Hybrid Technology | Afore AF30K-THAfore | Solplanet ASW030K-THSolplanet |
|---|---|---|---|
| Rated power? | 30 kW | 30 kW | 30 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
SUNGROW warrants its solar products for 10 years against manufacturing defects, with exclusions for improper installation and environmental conditions. Claims can be made through your installer.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 8 of 8. The official install manual is the authoritative source — always confirm before acting.
3x6BcriticalCall your installerBattery communication error
3x6CcriticalCall your installerBattery internal error
Arc detectedcriticalCall your installerAn arc has been detected in the system
Isolation or RCD problemcriticalCall your installerThere is an issue with isolation or the residual current device
Grid errorwarningThe inverter is experiencing a grid-related issue
High temperaturewarningThe inverter has detected a high temperature condition
Pairing failedwarningThe inverter failed to pair with the Power Optimizers
Other issueinfoA generic error has occurred
SP30HBPS (AS4777-2 2020)
30 kW · 3φ
SP25HBG2 (AS4777-2 2020)
25 kW · 3φ
SP25HBPS (AS4777-2 2020)
25 kW · 3φ
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.