Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Sigenergy · Sigen Energy Storage System series · CEC approved April 2026
CEC listing: SigenStor-10S-EV25-25.16 (AS4777-2 2020)
A 10 kW single-phase hybrid inverter that is battery-ready.
Sigenergy's SigenStor is a newer entrant offering an integrated inverter-battery design and a modern industrial-design aesthetic. Smart energy management features are part of the product proposition. For Perth installs, Sigenergy gives buyers a design-led alternative to established brands. As a recent arrival, verify installer experience and long-term support before specifying.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Warranty
How long Sigenergy Technology Co Ltd stands behind it
Every figure on file for the Sigenergy SigenStor-10S-EV25-25.16, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 600 mm |
| Side clearance | 300 mm |
| AC breaker | 25 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
16 Apr 2026
Approval expiry
31 Dec 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
3 years
Australian Office
Yes
CEC-Approved Batteries
2118
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$3,500–$5,999
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.sigenergy.com/auThe Sigenergy SigenStor-10S-EV25-25.16 against the closest-power inverters from other brands.
| Specification | Sigenergy SigenStor-10S-EV25-25.16Sigenergy | Solplanet ASW010K-SHSolplanet | Solplanet ASW10000-S-ASolplanet |
|---|---|---|---|
| Rated power? | 9.999 kW | 9.999 kW | 9.999 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects for 10 years. It excludes damage from improper installation or tampering. To claim, contact support with your proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Sigenergy Sigen Energy Storage System series
Compare every Sigenergy Sigen Energy Storage System variant side by side →
Sigen Hybrid 10.0 SP AU (AS4777-2 2020)
9.999 kW · 1φ
Sigen Hybrid 10.0 TP AU (AS4777-2 2020)
9.999 kW · 3φ
Sigen Hybrid 12.0 SP AU (AS4777-2 2020)
12 kW · 1φ
Sigen Hybrid 12.0 TP AU (AS4777-2 2020)
12 kW · 3φ
Sigen Hybrid 15.0 TP AU (AS4777-2 2020)
15 kW · 3φ
Sigen Hybrid 17.0 TP AU (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from Sigenergy Technology Co Ltd available in Australia.
SigenStack M2-0.5C-20/241.15 kWh
234 kWh · LFP
SigenStack M2-0.5C-21/253.21 kWh
245.7 kWh · LFP
SigenStack M2-0.5C-22/265.27 kWh
257.4 kWh · LFP
SigenStack M2-0.5C-23/277.32 kWh
269.1 kWh · LFP
SigenStack M2-0.5C-24/289.38 kWh
280.8 kWh · LFP
SigenStack M2-0.5C-25/301.44 kWh
292.5 kWh · LFP
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.