Hybrid inverter · Sofar · CEC approved May 2026
CEC listing: ESI-9.99K-T1-A (AS4777-2 2020)
A 10 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Sofar ESI-9.99K-T1-A, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
| Operating temperature | 25°C to 60°C |
| Installation requirements | |
| Top clearance | 30 mm |
| Side clearance | 30 mm |
| AC breaker | 20 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.sofarsolar.comThe Sofar ESI-9.99K-T1-A against the closest-power inverters from other brands.
| Specification | Sofar ESI-9.99K-T1-ASofar | GoodWe GW9.9KAU-DTGoodWe | |
|---|---|---|---|
| Rated power? | 9.99 kW | 9.99 kW | 9.99 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The warranty covers manufacturing defects for 10 years. Capacity must remain above 80% at year 10. It does not cover non-accredited installations. Claims can be made via the support contact.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.
001criticalGrid voltage is too high
002criticalGrid voltage is too low
003criticalGrid frequency is too high
004criticalGrid frequency is too low
005criticalCall your installerCharge leakage fault
008criticalIsland protection fault
012criticalCall your installerInverter overvoltage
013criticalCall your installerFeed-in Limit function is faulty
032criticalCall your installerNeutral ground fault
042criticalCall your installerInsulation resistance is too low
066criticalCall your installerTransient value of bus voltage is unbalanced
ESI-10K-T1 (AS4777-2 2020)
10 kW · 3φ
HYD 10KTL-3PH-A (AS4777-2 2020)
10 kW · 3φ
HYD 10KTL-3PH (AS4777-2 2020)
10 kW · 3φ
ESI-9.9K-T1-A (AS4777-2 2020)
9.9 kW · 3φ
ESI-8K-T1 (AS4777-2 2020)
8 kW · 3φ
HYD 8KTL-3PH (AS4777-2 2020)
8 kW · 3φ
Other CEC-approved products from Sofar available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.