Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · Shenzhen Sinexcel Electric · PWS1-500KTL-EX Series series · CEC approval expired
CEC listing: PWS1-500KTL-EX-3M8 (AS4777-2 2020)
A 187.5 kW single-phase solar inverter.
Commercial-scale inverter
At 187.5 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar only
Battery compatible
No
Backup capable
No
CEC approved
26 Apr 2023
Approval expiry
26 Apr 2026
Status
Not listed
Eligible for rebates
No (not listed)
Years in AU Market
4 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$37,500–$75,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
The Shenzhen Sinexcel Electric PWS1-500KTL-EX-3M8 against the closest-power inverters from other brands.
| Specification | Shenzhen Sinexcel Electric PWS1-500KTL-EX-3M8Shenzhen Sinexcel Electric | Shenzhen Atess Power Technology HPS150Shenzhen Atess Power Technology | Shenzhen Magarevo Technology MPS0150Shenzhen Magarevo Technology |
|---|---|---|---|
| Rated power? | 187.5 kWbest value | 150 kW | 150 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | Not verified | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Part of the Shenzhen Sinexcel Electric PWS1-500KTL-EX Series series
Compare every Shenzhen Sinexcel Electric PWS1-500KTL-EX Series variant side by side →
PWG2-100K-EX (AS4777-2 2020)
100 kW · 1φ
PWG2-50K-EX (AS4777-2 2020)
50 kW · 1φ
PWS1-500KTL-EX-1M1 (AS4777-2 2020)
62.5 kW · 1φ
PWS1-500KTL-EX-1M8 (AS4777-2 2020)
62.5 kW · 1φ
PWS1-500KTL-EX-2M1 (AS4777-2 2020)
125 kW · 1φ
PWS1-500KTL-EX-2M4 (AS4777-2 2020)
125 kW · 1φ
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.