Hybrid inverter · KSTAR · CEC approved September 2026
CEC listing: KAC40DP2 (AS4777-2 2020)
A 40 kW three-phase hybrid inverter that is battery-ready.
Commercial-scale inverter
At 40 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the KSTAR KAC40DP2, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 500 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 10 mm² |
| Earthing method | MEN |
| DNSP pre-approval | Yes |
| Estimated install time | 4 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
The KSTAR KAC40DP2 against the closest-power inverters from other brands.
| Specification | KSTAR KAC40DP2KSTAR | Solplanet ASW40K-LT-G3Solplanet | Solis S5-GC40K-AUSolis |
|---|---|---|---|
| Rated power? | 40 kW | 40 kW | 40 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Hybrid | Solar | Solar |
| Battery ready | Yes | No | No |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
KSTAR offers a 5-year warranty covering defects in materials and workmanship. It excludes damage from improper installation or climate effects. Claims can be made via KSTAR’s website or email.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 20 of 20. The official install manual is the authoritative source — always confirm before acting.
F07criticalCall your installerInsulation impedance Fault
F12criticalAmbient Temperature Over
F13criticalHeatsink Temperature High
F14criticalCall your installerAC Relay Fault
F20criticalCall your installerLeakage Current High
F21criticalCall your installerLeakage Current Self-Checking Failure
F22criticalCall your installerConsistency Voltage Fault
F23criticalCall your installerConsistency Frequency Fault
F24criticalCall your installerDSP Operation Fault
F32criticalCall your installerDSP communication Lost
F00-F03warningAC voltage & frequency are too high or too low
F04-F05warningBus voltage is too high or too low
F06warningBus voltage is unbalanced
F08warningInput Current High
F09warningHardware Current High
F10warningInverter Current High
F11warningInverter DC Current high
F15warningPV Input Voltage Low
F18warningSPI communication Fault
F16infoRemote Off
KAC49.9DP2 (AS4777-2 2020)
49.9 kW · 3φ
KAC30DP2 (AS4777-2 2020)
30 kW · 3φ
KAC50DP2 (AS4777-2 2020)
50 kW · 3φ
KAC29.9DP2 (AS4777-2 2020)
29.9 kW · 3φ
KAC25DP2 (AS4777-2 2020)
25 kW · 3φ
KAC20DP2 (AS4777-2 2020)
20 kW · 3φ
Other CEC-approved products from KSTAR available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.