Solar inverter · Shenzhen Infypower · CEC approved November 2025
CEC listing: EXP07K1E-FSW-C + IAU32AS-AW2 (AS4777-2 2020)
A 6.2 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Shenzhen Infypower EXP07K1E-FSW-C + IAU32AS-AW2, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 6.2 kW |
| Maximum power | 6.2 kW |
| Apparent power | 6.2 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 94.5% |
| European efficiency | 94.5% |
| CEC-weighted efficiency | 94.5% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 750 V |
| MPPT voltage min | 300 V |
| MPPT voltage max | 750 V |
| Max input current | 28.7 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 6.2 kW |
| Physical | |
| Dimensions (H×W×D) | 658 × 340 × 190 mm |
| Weight | 2.5 kg |
| IP rating | IP65 |
| Cooling | Fan cooling |
| Operating temperature | -25°C to 50°C |
| Installation requirements | |
| Top clearance | 20 mm |
| Side clearance | 10 mm |
| AC breaker | 50 A |
| Cable gauge | 4 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 10 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Shenzhen Infypower EXP07K1E-FSW-C + IAU32AS-AW2 against the closest-power inverters from other brands.
| Specification | Shenzhen Infypower EXP07K1E-FSW-C + IAU32AS-AW2Shenzhen Infypower | Shenzhen Infypower EXP07K1E-FSW-C + IAU32AD-AW1Shenzhen Infypower | Shenzhen Infypower EXP07K1E-FSW-C + IAU32AS-AW1Shenzhen Infypower |
|---|---|---|---|
| Rated power? | 6.2 kW | 6.2 kW | 6.2 kW |
| Max efficiency? | 94.5% | Not on file | Not on file |
| MPPT trackers? | 1 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 10 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The warranty covers defects for 10 years; capacity must be at least 80% after 10 years. Claims can be made via contact information provided.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
EXP07K1E-FSW-C + IAU32AD-AW1 (AS4777-2 2020)
6.2 kW · 1φ
EXP07K1E-FSW-C + IAU32AS-AW1 (AS4777-2 2020)
6.2 kW · 1φ
EXP07K1E-FSW-E + IAU32AD-AW1 (AS4777-2 2020)
6.2 kW · 1φ
EXP07K1E-FSW-E + IAU32AS-AW1 (AS4777-2 2020)
6.2 kW · 1φ
EXP07K1E-FSW-E + IAU32AS-AW2 (AS4777-2 2020)
6.2 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.