Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Shenzhen Hnergy
  4. HNESPS125-44M0

Battery inverter · Shenzhen Hnergy · CEC approved April 2026

Shenzhen Hnergy HNESPS125-44M0

CEC listing: HNESPS125-44M0 (AS4777-2 2020)

A 125 kW three-phase battery inverter.

Rated power
125kWHow much solar it can run at once: a large roof
Battery-ready
YesBattery inverter: it runs the battery, alongside your solar inverter

Commercial-scale inverter

At 125 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.

Browse home-size inverters →
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a battery inverter: it runs a battery, and pairs with a separate solar inverter.
  • It needs a three-phase supply, so check your switchboard or ask your installer.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
125kW
How much solar it can turn into usable power at once
Max efficiency
97.6%
How much of the solar you make reaches the house
Phases
3-phase
Needs a three-phase supply, so check your switchboard
Type
Battery
Runs a battery; pairs with a separate solar inverter
Warranty
Not on file: we don't have this figure from the manufacturer's documents yet
How long ShenZhen HNergy Co Ltd stands behind it

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the Shenzhen Hnergy HNESPS125-44M0, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency97.6%
Installation requirements
Top clearance200 mm
Side clearance500 mm
AC breaker63 A
Cable gauge13 mm²
Earthing methodGrounding Bar
DNSP pre-approvalYes
Estimated install time8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
23 Apr 2026
Approval expiry
23 Apr 2029
Status
Active
Listed for STCs
Yes

About Shenzhen Hnergy

Australian office
Not verified
Category
Unknown
CEC-approved inverters
8
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • Browse CEC-approved panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

0 years on the CEC list

How it compares

The Shenzhen Hnergy HNESPS125-44M0 against the closest-power inverters from other brands.

Specification
Shenzhen Hnergy HNESPS125-44M0Shenzhen Hnergy
Delta AIOA279K125LDelta
Delta AIOC279K125LDelta
Rated power?125 kW125 kW125 kW
Max efficiency?97.6%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesThree-phaseThree-phaseThree-phase
TypeBatteryBatteryHybrid
Battery readyYesYesYes
WarrantyNot on fileNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsOpens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

Warranty summary

This warranty covers defects for 0 years. Non-accredited installations void coverage. Claims can be made via the official warranty document.

Inverter warranty

Shenzhen Hnergy HNESPS125-44M0

This warranty covers defects for 0 years. Non-accredited installations void coverage. Claims can be made via the official warranty document.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Does not transfer with the home
What voids it
Non-accredited installations, modifications, tampering voids the warranty.
Environment limits
N/A
Read the official warranty document (PDF)

Fault & error codes — Shenzhen Hnergy HNESPS125-44M0

From the install manual

56 documented

Showing 56 of 56. The official install manual is the authoritative source — always confirm before acting.

  • 01criticalCall your installer
    Manual (PDF)

    Battery undervoltage alarm

    Likely cause
    Battery voltage is below the acceptable limit.
    What to do
    Charge the battery until it returns to the low voltage disconnection recovery voltage.
  • 02criticalCall your installer
    Manual (PDF)

    Battery discharge average current overcurrent (software protection)

    Likely cause
    Battery discharge current exceeds the limit set in software.
    What to do
    Reduce the load on the battery; check connections.
  • 03criticalCall your installer
    Manual (PDF)

    Battery not-connected alarm

    Likely cause
    Battery is not connected properly.
    What to do
    Check if the battery is connected and the circuit breaker is closed.
  • 04criticalCall your installer
    Manual (PDF)

    Battery undervoltage stop discharge alarm

    Likely cause
    Battery voltage reached the undervoltage threshold during discharge.
    What to do
    Stop discharging the battery; charge it immediately.
  • 05criticalCall your installer
    Manual (PDF)

    Battery overcurrent (hardware protection)

    Likely cause
    Hardware protection engaged due to high discharge current.
    What to do
    Check the load and disconnect it if necessary; contact professional if issue persists.
  • 06criticalCall your installer
    Manual (PDF)

    Charging overvoltage protection

    Likely cause
    Battery voltage above the charging threshold.
    What to do
    Discontinue charging until voltage is back to normal.
  • 07criticalCall your installer
    Manual (PDF)

    Bus overvoltage (hardware protection)

    Likely cause
    Busbar voltage exceeds the specified limit.
    What to do
    Inspect system for issues; disconnect to prevent damage.
  • 08criticalCall your installer
    Manual (PDF)

    Bus overvoltage (software protection)

    Likely cause
    Software protection engaged due to high bus voltage.
    What to do
    Reduce input voltage; check system operation.
  • 09criticalCall your installer
    Manual (PDF)

    PV overvoltage protection

    Likely cause
    Input from PV panels exceeds maximum voltage.
    What to do
    Inspect PV connections and reduce input voltage.
  • 12criticalCall your installer
    Manual (PDF)

    Master-slave HES communication failure

    Likely cause
    Communication issue between master and slave units.
    What to do
    Check connections and reset the devices.
  • 13criticalCall your installer
    Manual (PDF)

    Bypass overload protection

    Likely cause
    Bypass system drawing too much current.
    What to do
    Reduce load on bypass; contact installer if problem persists.
  • 14criticalCall your installer
    Manual (PDF)

    Inverter overload protection

    Likely cause
    Inverter is overloaded with power exceeding capability.
    What to do
    Reduce load immediately; restart if necessary.
  • 15criticalCall your installer
    Manual (PDF)

    Inverter overcurrent hardware protection

    Likely cause
    Excessive current detected by hardware protectors.
    What to do
    Investigate load and system; disconnect if needed.
  • 16criticalCall your installer
    Manual (PDF)

    Requesting a shutdown fault from the chip

    Likely cause
    An internal request to shut down due to fault.
    What to do
    Investigate underlying issues; reset system if possible.
  • 17criticalCall your installer
    Manual (PDF)

    Inverter short-circuit protection

    Likely cause
    Short circuit detected in output.
    What to do
    Disconnect load; investigate and repair as needed.
  • 20criticalCall your installer
    Manual (PDF)

    Inverter AC output with load or AC charging radiator over-temperature protection

    Likely cause
    Overheating due to excess load or charging.
    What to do
    Reduce load and allow cooling.
  • 22criticalCall your installer
    Manual (PDF)

    Memory failure

    Likely cause
    EEPROM or memory component has failed.
    What to do
    Contact installer for replacement or service.
  • 23criticalCall your installer
    Manual (PDF)

    Model setting error

    Likely cause
    Incorrect model configuration in the system settings.
    What to do
    Verify model settings and correct.
  • 24criticalCall your installer
    Manual (PDF)

    Positive and negative bus voltage imbalance

    Likely cause
    Voltage levels are unequal across the bus.
    What to do
    Check wiring and connections to resolve imbalance.
  • 25criticalCall your installer
    Manual (PDF)

    Busbar short circuit

    Likely cause
    Short circuit in busbar.
    What to do
    Disconnect immediately and investigate.
  • 26criticalCall your installer
    Manual (PDF)

    Inverter AC output backfeed to bypass AC output

    Likely cause
    Reverse current detected.
    What to do
    Check wiring and configurations.
  • 28criticalCall your installer
    Manual (PDF)

    Utility input phase error

    Likely cause
    Mismatch in utility input phase connections.
    What to do
    Consult electrician to correct phase connection.
  • 29criticalCall your installer
    Manual (PDF)

    Low bus voltage protection

    Likely cause
    Busbar voltage has dropped below thresholds.
    What to do
    Check battery and utility inputs; recharge if needed.
  • 34criticalCall your installer
    Manual (PDF)

    CAN communication fault in parallel operation

    Likely cause
    Failure in CAN communication line for parallel setups.
    What to do
    Check CAN connections and system settings.
  • 35criticalCall your installer
    Manual (PDF)

    Parallel ID (communication address) setting error

    Likely cause
    Incorrect configuration of parallel IDs.
    What to do
    Verify and correct parallel ID settings.
  • 37criticalCall your installer
    Manual (PDF)

    Parallel current sharing fault

    Likely cause
    Inadequate sharing of current in parallel operation.
    What to do
    Check and adjust connection settings; if needed, consult installer.
  • 38criticalCall your installer
    Manual (PDF)

    Large battery voltage difference in parallel mode

    Likely cause
    Notable voltage variance in batteries connected in parallel.
    What to do
    Balance battery voltages before restarting.
  • 39criticalCall your installer
    Manual (PDF)

    Inconsistent AC input source in parallel mode

    Likely cause
    Different AC input sources detected in parallel configuration.
    What to do
    Ensure identical AC sources for parallel units.
  • 40criticalCall your installer
    Manual (PDF)

    Hardware synchronization signal error in parallel mode

    Likely cause
    Failure to synchronize mechanisms in parallel configuration.
    What to do
    Check synchronization setup and configurations.
  • 41criticalCall your installer
    Manual (PDF)

    Inverter DC voltage error

    Likely cause
    DC voltage outside allowable limits in inverter.
    What to do
    Inspect connections and adjust voltage source if necessary.
  • 42criticalCall your installer
    Manual (PDF)

    Inconsistent system firmware version in parallel mode

    Likely cause
    Mismatched versions of installed firmware.
    What to do
    Update firmware across all units to synchronize.
  • 43criticalCall your installer
    Manual (PDF)

    Parallel line connection error in parallel mode

    Likely cause
    Wiring errors in parallel configurations.
    What to do
    Check and correct wiring connections for parallel units.
  • 44criticalCall your installer
    Manual (PDF)

    No serial number set at factory

    Likely cause
    Factory configuration missing serial number.
    What to do
    Contact manufacturer for correction.
  • 45criticalCall your installer
    Manual (PDF)

    Item “Parallel” setting error

    Likely cause
    Incorrectly set parallel options in configuration.
    What to do
    Verify parallel settings and adjust accordingly.
  • 49criticalCall your installer
    Manual (PDF)

    Grid over voltage

    Likely cause
    Input grid voltage exceeds normal limits.
    What to do
    Check grid connection and voltage; inform electric utility if issues persist.
  • 50criticalCall your installer
    Manual (PDF)

    Grid under voltage

    Likely cause
    Input grid voltage falls below threshold values.
    What to do
    Monitor utility voltage; wait until stable before restarting.
  • 51criticalCall your installer
    Manual (PDF)

    Grid over Frequency

    Likely cause
    Grid frequency exceeds acceptable operating frequency.
    What to do
    Ascertain utility conditions; halt operations if necessary.
  • 52criticalCall your installer
    Manual (PDF)

    Grid under Frequency

    Likely cause
    Grid frequency falls below operating parameters.
    What to do
    Ascertain utility conditions; halt operations if necessary.
  • 53criticalCall your installer
    Manual (PDF)

    Grid loss

    Likely cause
    Loss of grid connection.
    What to do
    Inspect connections; switch to battery power if needed.
  • 54criticalCall your installer
    Manual (PDF)

    Grid-connected current with DC component over

    Likely cause
    Inverter detects abnormal current flow with a DC component.
    What to do
    Diagnose and remedy abnormal installations; consult technician.
  • 55criticalCall your installer
    Manual (PDF)

    Grid standard not set

    Likely cause
    Failure to configure grid standards in inverter settings.
    What to do
    Set appropriate grid standards in settings.
  • 57criticalCall your installer
    Manual (PDF)

    System leakage current exceeds limit.

    Likely cause
    Leakage current detected beyond safety thresholds.
    What to do
    Inspect installation for leaks; disconnect power if necessary.
  • 61criticalCall your installer
    Manual (PDF)

    BMS alarm battery over temperature. (Effective after successful BMS communication)

    Likely cause
    Battery management system detects high battery temperature.
    What to do
    Cool down battery; ensure airflow is sufficient.
  • 62criticalCall your installer
    Manual (PDF)

    BMS alarm battery over current. (Effective after successful BMS communication)

    Likely cause
    BMS detects excessive current across battery terminals.
    What to do
    Reduce load and inspect current flows.
  • 19warning
    Manual (PDF)

    Buck heat sink over temperature protection

    Likely cause
    Heat sink has exceeded temperature threshold.
    What to do
    Allow cooling; ensure proper ventilation.
  • 21warning
    Manual (PDF)

    Fan blockage or failure fault

    Likely cause
    Fan is blocked or not operating correctly.
    What to do
    Check and clean fan; ensure it operates.
  • 30warning
    Manual (PDF)

    Alarm given when battery capacity rate is lower than 10%

    Likely cause
    Battery capacity is critically low.
    What to do
    Charge battery immediately; monitor capacity.
  • 31warning
    Manual (PDF)

    Alarm given when battery capacity rate is lower than 5%

    Likely cause
    Battery is nearly depleted.
    What to do
    Charge the battery immediately to avoid shutdown.
  • 32warning
    Manual (PDF)

    Inverter stops when battery capacity is low

    Likely cause
    Preventive shutoff to protect battery.
    What to do
    Charge battery before attempting to restart system.
  • 56warningCall your installer
    Manual (PDF)

    PV1+, PV2+ and PV- abnormally low impedance to ground.

    Likely cause
    Grounding issues detected in photovoltaic connections.
    What to do
    Inspect PV installations for grounding issues; resolve immediately.
  • 63warning
    Manual (PDF)

    BMS alarm low battery. (Effective after successful BMS communication)

    Likely cause
    Battery has reached low charge levels as defined by BMS.
    What to do
    Charge battery immediately to avoid shutoff.
  • 10info
    Manual (PDF)

    Boost overcurrent (software protection)

    Likely cause
    Software protection active due to excessive current.
    What to do
    Check loads and adjust as necessary.
  • 11info
    Manual (PDF)

    Boost overcurrent (hardware protection)

    Likely cause
    Hardware protection due to overcurrent during boost phase.
    What to do
    Reduce load to avoid repeated faults; check hardware.
  • 18info
    Manual (PDF)

    Bus soft start failure

    Likely cause
    Failure to initiate soft start process on the bus.
    What to do
    Check configurations and reset.
  • 58info
    Manual (PDF)

    BMS communication failure

    Likely cause
    Failed communication with Battery Management System.
    What to do
    Monitor system for stable BMS communication; replace hardware if needed.
  • 60info
    Manual (PDF)

    BMS alarm battery low temperature.

    Likely cause
    Battery management system detects low battery temperature.
    What to do
    Warm up battery if possible; check environment.

More ShenZhen HNergy Co Ltd inverters

HNESPS125-34M0 (AS4777-2 2020)

125 kW · 3φ

HNESPS125-34M0Q (AS4777-2 2020)

125 kW · 3φ

HNESPS125-44M0Q (AS4777-2 2020)

125 kW · 3φ

HNESPS115-34M0 (AS4777-2 2020)

115 kW · 3φ

HNESPS115-34M0Q (AS4777-2 2020)

115 kW · 3φ

HNESPS115-44M0 (AS4777-2 2020)

115 kW · 3φ

View all ShenZhen HNergy Co Ltd inverters

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?