Hybrid inverter · Growatt · CEC approved November 2024
CEC listing: SPH 4000TL-HUB (AS4777-2 2020)
A 4 kW single-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have these figures from the manufacturer’s documents yet, so we leave them blank rather than print typical values. Ask your installer to confirm them on the quote. Seen it in a document? Tell us
Every figure on file for the Growatt SPH 4000TL-HUB, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 4 kW |
| Maximum power | 4 kW |
| Apparent power | 4 kVA |
| Phases | 1 |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Max input voltage | 600 V |
| MPPT voltage min | 100 V |
| MPPT voltage max | 560 V |
| Max input current | 16 A |
| Battery & backup | |
| Battery compatible | No |
| Backup capable | No |
| Continuous backup | 0 kW |
| Physical | |
| Dimensions (H×W×D) | 1692 × 690 × 186 mm |
| Weight | 170 kg |
| Operating temperature | 0°C to 0°C |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.growatt.com.auThe Growatt SPH 4000TL-HUB against the closest-power inverters from other brands.
| Specification | Growatt SPH 4000TL-HUBGrowatt | Afore AF4K-SLAfore | Afore HNS4000TLAfore |
|---|---|---|---|
| Rated power? | 4 kW | 4 kW | 4 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | 2 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
This warranty covers defects in materials and workmanship for the solar energy storage system. Exclusions may apply for improper installation or modifications, and claims can be initiated by contacting customer support.
This warranty covers defects in materials and workmanship for the solar energy storage system. Exclusions may apply for improper installation or modifications, and claims can be initiated by contacting customer support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Growatt SPH4000 (AS4777-2 2020)
4 kW · 1φ
MOD 4000TL3-X (AS4777-2 2020)
4 kW · 1φ
SPA 4000TL-AU (AS4777-2 2020)
4 kW · 1φ
SPA 4000TL-AUB (AS4777-2 2020)
4 kW · 1φ
SPH 4000TL BL-UP (AS4777-2 2020)
4 kW · 1φ
SPH 4000TL-HU (AS4777-2 2020)
4 kW · 1φ
Other CEC-approved products from Growatt available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.