Loading Solar Battery Perth...

Hybrid inverter · Growatt · MIN TL-XH2 series · CEC approved July 2024

Growatt MIN 4200TL-XH2

CEC listing: MIN 4200TL-XH2 (AS4777-2 2020)

A 4.2 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$1,995; Estimate for the inverter alone — your quote will vary
Rated power: 4.2kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole MIN TL-XH2 series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 4.2kW
Max efficiency How much of the solar you make reaches the house: 98.4%
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Shenzhen Growatt New Energy Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Growatt MIN 4200TL-XH2, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	2.5 kW
Efficiency
Max efficiency	98.4%
European efficiency	97.1%
Installation requirements
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 July 2024

Approval expiry

10 July 2027

Status

Active

Eligible for rebates

Yes

About Shenzhen Growatt New Energy Co Ltd

Years in AU Market

12 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$1,470–$2,520

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 17.8 kWh
Annual yield: 6,515 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.growatt.com.au

12 years in Australian market

How it compares

The Growatt MIN 4200TL-XH2 against the closest-power inverters from other brands.

Specification	Growatt MIN 4200TL-XH2Growatt	Beijing Hua Xin Liu He Investment Z20I4K2D-2Beijing Hua Xin Liu He Investment	Beijing Hua Xin Liu He Investment Z20I4K2DBeijing Hua Xin Liu He Investment

Rated power?	4.2 kW	4.2 kW	4.2 kW
Max efficiency?	98.4%best value	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Single-phase
Type	Hybrid	Solar	Solar
Battery ready	Yes	No	No
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Growatt MIN 4200TL-XH2

The warranty covers defects in materials and workmanship for a period of 10 years, but excludes damages due to improper installation or use. To make a claim, contact customer service with your inverter's serial number and description of the issue.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Non-accredited installation, modification of the inverter, or operating conditions outside specified parameters.
Environment limits: None stated.

Read the official warranty document (PDF)

Fault & error codes — Growatt MIN 4200TL-XH2

From the install manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

200criticalCall your installer
Manual (PDF)
AFCI Tripped
Likely cause
An electric arc has occurred in the PV system
What to do
Disconnect all power supply connections to the inverter. Turn off the battery input switch; turn off the inverter's AC output breaker; turn the inverter's PV input DC switch to the position 'OFF', and wait until the error message disappears.
425criticalCall your installer
Manual (PDF)
AFCI Self-Test Failed
Likely cause
AFCI self-test is unsuccessful
What to do
Disconnect all power supply connections to the inverter and contact Growatt.
201warningCall your installer
Manual (PDF)
Residual I High
Likely cause
Leakage current is excessively high
What to do
Restart the inverter. If the error message still exists, contact Growatt.
202warningCall your installer
Manual (PDF)
PV Voltage High
Likely cause
The DC input voltage exceeds the specified upper threshold
What to do
Disconnect the DC switch immediately. Check the voltage of each PV string with a multimeter. If the voltage of PV string is lower than 550V, contact Growatt.
203warningCall your installer
Manual (PDF)
PV Insulation Resistance Low
Likely cause
Insulation problem
What to do
Check if the panel enclosure is grounded properly. Check if the inverter is grounded properly. Check if the DC breaker gets wet. Check the impedance between PV(+) and PV(-) and the ground, which must be more than 25KΩ or 550KΩ according to VDE0126 standards. If the error message persists, contact Growatt.
300warningCall your installer
Manual (PDF)
AC V Outrange
Likely cause
Utility grid voltage is out of permissible range
What to do
Switch off the DC switch. Check the AC wiring, especially the neutral and ground wire. Check if the grid voltage complies with local grid standard. Restart the inverter, if the problem persists, contact Growatt.
302warning
Manual (PDF)
No AC Connection
Likely cause
No AC connection
What to do
Check AC wiring. Check the status of the AC breaker.
303warningCall your installer
Manual (PDF)
PE Abnormal
Likely cause
The voltage difference between the Neutral and PE is above 30V
What to do
Check the voltage of Neutral and PE cables. Check AC wiring. Restart the inverter, if the error message persists, contact Growatt.
304warningCall your installer
Manual (PDF)
AC F Outrange
Likely cause
Utility grid frequency is out of permissible range
What to do
Switch off the DC switch. Check the AC wiring, especially the neutral and ground wires. Check if the grid frequency complies with local grid standard. Restart the inverter, if the problem persists, contact Growatt.
407warningCall your installer
Manual (PDF)
Auto Test Failure
Likely cause
Self-test fails
What to do
Restart the inverter, repeat the Auto Test, if the problem persists, contact Growatt.

Part of the Growatt MIN TL-XH2 series

Compare every Growatt MIN TL-XH2 variant side by side →

More Shenzhen Growatt New Energy Co Ltd Inverters

Growatt SPH3000 (AS4777-2 2020)

3 kW · 1φ

Growatt SPH4000 (AS4777-2 2020)

4 kW · 1φ

Growatt SPH5000 (AS4777-2 2020)

5 kW · 1φ

Growatt SPH6000 (AS4777-2 2020)

6 kW · 1φ

MAX 100KTL3-X LV (AS4777-2 2020)

100 kW · 1φ

MAX 110KTL3-X LV (AS4777-2 2020)

110 kW · 1φ

View all Shenzhen Growatt New Energy Co Ltd inverters

More from Shenzhen Growatt New Energy Co Ltd

Other CEC-approved products from Shenzhen Growatt New Energy Co Ltd available in Australia.

Shenzhen Growatt New Energy Co Ltd Batteries

ALP 10.0L-E1

10 kWh · LFP

ALP 10.0L-E2

10 kWh · LFP

ALP 15.0L-E1

15 kWh · LFP

ALP 15.0L-E2

15 kWh · LFP

ALP 20.0L-E1

20 kWh · LFP

ALP 20.0L-E2

20 kWh · LFP

View all Shenzhen Growatt New Energy Co Ltd batteries

View full Shenzhen Growatt New Energy Co Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Growatt · MIN TL-XH2 series · CEC approved July 2024

Growatt MIN 4200TL-XH2

CEC listing: MIN 4200TL-XH2 (AS4777-2 2020)

A 4.2 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$1,995; Estimate for the inverter alone — your quote will vary
Rated power: 4.2kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole MIN TL-XH2 series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 4.2kW
Max efficiency How much of the solar you make reaches the house: 98.4%
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Shenzhen Growatt New Energy Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Growatt MIN 4200TL-XH2, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	2.5 kW
Efficiency
Max efficiency	98.4%
European efficiency	97.1%
Installation requirements
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

10 July 2024

Approval expiry

10 July 2027

Status

Active

Eligible for rebates

Yes

About Shenzhen Growatt New Energy Co Ltd

Years in AU Market

12 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$1,470–$2,520

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 17.8 kWh
Annual yield: 6,515 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.growatt.com.au

12 years in Australian market

How it compares

The Growatt MIN 4200TL-XH2 against the closest-power inverters from other brands.

Specification	Growatt MIN 4200TL-XH2Growatt	Beijing Hua Xin Liu He Investment Z20I4K2D-2Beijing Hua Xin Liu He Investment	Beijing Hua Xin Liu He Investment Z20I4K2DBeijing Hua Xin Liu He Investment

Rated power?	4.2 kW	4.2 kW	4.2 kW
Max efficiency?	98.4%best value	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Single-phase
Type	Hybrid	Solar	Solar
Battery ready	Yes	No	No
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Growatt MIN 4200TL-XH2

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Non-accredited installation, modification of the inverter, or operating conditions outside specified parameters.
Environment limits: None stated.

Read the official warranty document (PDF)

Fault & error codes — Growatt MIN 4200TL-XH2

From the install manual

10 documented

Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.

200criticalCall your installer
Manual (PDF)
AFCI Tripped
Likely cause
An electric arc has occurred in the PV system
What to do
Disconnect all power supply connections to the inverter. Turn off the battery input switch; turn off the inverter's AC output breaker; turn the inverter's PV input DC switch to the position 'OFF', and wait until the error message disappears.
425criticalCall your installer
Manual (PDF)
AFCI Self-Test Failed
Likely cause
AFCI self-test is unsuccessful
What to do
Disconnect all power supply connections to the inverter and contact Growatt.
201warningCall your installer
Manual (PDF)
Residual I High
Likely cause
Leakage current is excessively high
What to do
Restart the inverter. If the error message still exists, contact Growatt.
202warningCall your installer
Manual (PDF)
PV Voltage High
Likely cause
The DC input voltage exceeds the specified upper threshold
What to do
Disconnect the DC switch immediately. Check the voltage of each PV string with a multimeter. If the voltage of PV string is lower than 550V, contact Growatt.
203warningCall your installer
Manual (PDF)
PV Insulation Resistance Low
Likely cause
Insulation problem
What to do
Check if the panel enclosure is grounded properly. Check if the inverter is grounded properly. Check if the DC breaker gets wet. Check the impedance between PV(+) and PV(-) and the ground, which must be more than 25KΩ or 550KΩ according to VDE0126 standards. If the error message persists, contact Growatt.
300warningCall your installer
Manual (PDF)
AC V Outrange
Likely cause
Utility grid voltage is out of permissible range
What to do
Switch off the DC switch. Check the AC wiring, especially the neutral and ground wire. Check if the grid voltage complies with local grid standard. Restart the inverter, if the problem persists, contact Growatt.
302warning
Manual (PDF)
No AC Connection
Likely cause
No AC connection
What to do
Check AC wiring. Check the status of the AC breaker.
303warningCall your installer
Manual (PDF)
PE Abnormal
Likely cause
The voltage difference between the Neutral and PE is above 30V
What to do
Check the voltage of Neutral and PE cables. Check AC wiring. Restart the inverter, if the error message persists, contact Growatt.
304warningCall your installer
Manual (PDF)
AC F Outrange
Likely cause
Utility grid frequency is out of permissible range
What to do
Switch off the DC switch. Check the AC wiring, especially the neutral and ground wires. Check if the grid frequency complies with local grid standard. Restart the inverter, if the problem persists, contact Growatt.
407warningCall your installer
Manual (PDF)
Auto Test Failure
Likely cause
Self-test fails
What to do
Restart the inverter, repeat the Auto Test, if the problem persists, contact Growatt.

Part of the Growatt MIN TL-XH2 series

Compare every Growatt MIN TL-XH2 variant side by side →

More Shenzhen Growatt New Energy Co Ltd Inverters

Growatt SPH3000 (AS4777-2 2020)

3 kW · 1φ

Growatt SPH4000 (AS4777-2 2020)

4 kW · 1φ

Growatt SPH5000 (AS4777-2 2020)

5 kW · 1φ

Growatt SPH6000 (AS4777-2 2020)

6 kW · 1φ

MAX 100KTL3-X LV (AS4777-2 2020)

100 kW · 1φ

MAX 110KTL3-X LV (AS4777-2 2020)

110 kW · 1φ

View all Shenzhen Growatt New Energy Co Ltd inverters