Solar inverter · Sigenergy · CEC approved September 2024
CEC listing: Sigen PV Max 4.0 SP (AS4777-2 2020)
A 4 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the Sigenergy Sigen PV Max 4.0 SP, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 4 kW |
| Maximum power | 4 kW |
| Apparent power | 4.4 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 98% |
| European efficiency | 97% |
| CEC-weighted efficiency | 95% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 600 V |
| MPPT voltage min | 80 V |
| MPPT voltage max | 500 V |
| Max input current | 18 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | No |
| Continuous backup | 4 kW |
| Physical | |
| Dimensions (H×W×D) | 400 × 300 × 200 mm |
| Weight | 11 kg |
| IP rating | IP66 |
| Cooling | Passive |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Cable gauge | 70 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.sigenergy.com/auThe Sigenergy Sigen PV Max 4.0 SP against the closest-power inverters from other brands.
| Specification | Sigenergy Sigen PV Max 4.0 SPSigenergy | Afore AF4K-SLAfore | Afore HNS4000TLAfore |
|---|---|---|---|
| Rated power? | 4 kW | 4 kW | 4 kW |
| Max efficiency? | 98.0% | Not on file | Not on file |
| MPPT trackers? | 1 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers defects in material and workmanship for five years, allowing transfers. It is voided by unauthorized modifications or non-compliance with installation standards.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Sigen Hybrid 4.0 SP (AS4777-2 2020)
4 kW · 1φ
Sigen Hybrid 3.6 SP (AS4777-2 2020)
3.68 kW · 1φ
Sigen Hybrid 4.6 SP (AS4777-2 2020)
4.6 kW · 1φ
Sigen Hybrid 5.0 SP (AS4777-2 2020)
4.999 kW · 1φ
Sigen PV Max 5.0 SP (AS4777-2 2020)
4.999 kW · 1φ
SigenStor-5S-10 (AS4777-2 2020)
4.999 kW · 1φ
Other CEC-approved products from Sigenergy available in Australia.
SigenStack M2-0.5C-20/241.15 kWh
234 kWh · LFP
SigenStack M2-0.5C-21/253.21 kWh
245.7 kWh · LFP
SigenStack M2-0.5C-22/265.27 kWh
257.4 kWh · LFP
SigenStack M2-0.5C-23/277.32 kWh
269.1 kWh · LFP
SigenStack M2-0.5C-24/289.38 kWh
280.8 kWh · LFP
SigenStack M2-0.5C-25/301.44 kWh
292.5 kWh · LFP
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.