Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · Sigenergy · SIGEN PV INVERTER series · CEC approved September 2024
CEC listing: Sigen PV Max 3.0 SP (AS4777-2 2020)
A 3 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
MPPT trackers
One string of panels, tuned as a whole
Type
Runs solar only
Warranty
How long Shanghai SIGEN New Energy Technology Co Ltd stands behind it
Every figure on file for the Sigenergy Sigen PV Max 3.0 SP, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 3 kW |
| Maximum power | 3 kW |
| Apparent power | 3.3 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 97% |
| European efficiency | 96% |
| CEC-weighted efficiency | 95% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 600 V |
| MPPT voltage min | 80 V |
| MPPT voltage max | 500 V |
| Max input current | 15 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | No |
| Continuous backup | 3 kW |
| Physical | |
| Dimensions (H×W×D) | 400 × 300 × 200 mm |
| Weight | 10 kg |
| IP rating | IP66 |
| Cooling | Passive |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Cable gauge | 70 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
No
Backup capable
No
CEC approved
17 Sept 2024
Approval expiry
17 Sept 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
3 years
Australian Office
Yes
CEC-Approved Batteries
2118
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$600–$1,200
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.sigenergy.com/auThe Sigenergy Sigen PV Max 3.0 SP against the closest-power inverters from other brands.
| Specification | Sigenergy Sigen PV Max 3.0 SPSigenergy | Energizer FORCE 3.0HSEnergizer | Energizer Force 3SEnergizer |
|---|---|---|---|
| Rated power? | 3 kW | 3 kW | 3 kW |
| Max efficiency? | 97.0%best value | 0.0% | 0.0% |
| MPPT trackers? | 1 | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in material and workmanship for five years, allowing transfers. It is voided by unauthorized modifications or non-compliance with installation standards.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Sigenergy SIGEN PV INVERTER series
Compare every Sigenergy SIGEN PV INVERTER variant side by side →
Sigen Hybrid 10.0 SP AU (AS4777-2 2020)
9.999 kW · 1φ
Sigen Hybrid 10.0 TP AU (AS4777-2 2020)
9.999 kW · 3φ
Sigen Hybrid 12.0 SP AU (AS4777-2 2020)
12 kW · 1φ
Sigen Hybrid 12.0 TP AU (AS4777-2 2020)
12 kW · 3φ
Sigen Hybrid 15.0 TP AU (AS4777-2 2020)
15 kW · 3φ
Sigen Hybrid 17.0 TP AU (AS4777-2 2020)
17 kW · 3φ
Other CEC-approved products from Shanghai SIGEN New Energy Technology Co Ltd available in Australia.
SigenStack M2-0.5C-20/241.15 kWh
234 kWh · LFP
SigenStack M2-0.5C-21/253.21 kWh
245.7 kWh · LFP
SigenStack M2-0.5C-22/265.27 kWh
257.4 kWh · LFP
SigenStack M2-0.5C-23/277.32 kWh
269.1 kWh · LFP
SigenStack M2-0.5C-24/289.38 kWh
280.8 kWh · LFP
SigenStack M2-0.5C-25/301.44 kWh
292.5 kWh · LFP
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.