Loading Solar Battery Perth...

Solar inverter · Se Group · DURACELL ENERGY BANK 3 series · CEC approval expired

Se Group DEB3-RF-5.0kW-I (AS4777-2 2020)

A 5 kW single-phase solar inverter.

Installed in Perth, typical: ~$1,500; Estimate for the inverter alone — your quote will vary
Rated power: 5kW; How much solar it can run at once
Battery-ready: No; Solar-only: adding a battery later means a second inverter

Compare inverters See the whole DURACELL ENERGY BANK 3 series

What we can tell you

Read from the figures on this page — no review written yet

It is a solar-only inverter: adding a battery later means a second inverter or an AC-coupled battery.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
Its CEC approval has expired, so a new install with it wouldn't qualify for STCs.
We hold no captured datasheet for this model yet, so the specs below come from the CEC register only.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 5kW
Phases Runs on a standard single-phase supply: Single
Type Runs solar only: Solar

Features & compatibility

Battery compatible

Backup capable

CEC approval details

CEC approved

18 July 2022

Approval expiry

18 July 2025

Status

Not listed

Eligible for rebates

No (not listed)

About Se Group

Years in AU Market

4 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$1,000–$2,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 21.2 kWh
Annual yield: 7,755 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

4 years in Australian market

How it compares

The Se Group DEB3-RF-5.0kW-I (AS4777-2 2020) against the closest-power inverters from other brands.

Specification	Se Group DEB3-RF-5.0kW-I (AS4777-2 2020)Se Group	Cornick Genius IA5 (AS4777-2 2020)Cornick	Hinen A5000S (AS4777-2 2020)Hinen

Rated power?	4.999 kW	4.999 kW	4.999 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Single-phase
Type	Solar	Solar	Hybrid
Battery ready	No	No	Yes
Warranty	Not verified	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Part of the Se Group DURACELL ENERGY BANK 3 series

Compare every Se Group DURACELL ENERGY BANK 3 variant side by side →

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.