Loading Solar Battery Perth...

Hybrid inverter · Redx · RX series · CEC approved June 2023

Redx RX-5000HY

CEC listing: RX-5000HY (AS4777-2 2020)

A 5 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$2,375; Estimate for the inverter alone — your quote will vary
Rated power: 5kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole RX series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 5kW
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Redx Technology Australia Pty Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Redx RX-5000HY, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	5 kW
Physical
Weight	22.5 kg
IP rating	IP65
Operating temperature	-10°C to 50°C
Installation requirements
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

19 June 2023

Approval expiry

1 Nov 2026

Status

Active

Eligible for rebates

Yes

About Redx Technology Australia Pty Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$1,750–$3,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 21.3 kWh
Annual yield: 7,756 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Redx RX-5000HY against the closest-power inverters from other brands.

Specification	Redx RX-5000HYRedx	Energizer FORCE 5.0HSEnergizer	Energizer Force 5.0HT+Energizer

Rated power?	5 kW	5 kW	5 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Redx RX-5000HY

This warranty covers defects in materials and workmanship for a period of 10 years. The warranty does not cover damages caused by improper installation or modifications.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Warranty void if installed by non-accredited technicians or if modifications are made to the product.
Environment limits: /

Read the official warranty document (PDF)

Fault & error codes — Redx RX-5000HY

From the install manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

Battery connection errorcriticalCall your installer
Manual (PDF)
No battery is detected
Likely cause
If the battery is connected, check whether the battery cable is securely connected and whether the battery voltage is normal.
What to do
Check battery connection and voltage.
Battery under voltage or over voltagecriticalCall your installer
Manual (PDF)
The battery voltage is abnormal, the internal circuit protection is triggered
Likely cause
Check whether the battery is correctly connected and whether the battery voltage is normal.
What to do
Ensure battery is in good condition and restart the module.
DC Bus over-voltagecriticalCall your installer
Manual (PDF)
High energy input to the inverter
Likely cause
A rapid change of power grid voltage may cause this issue, or internal dc-dc converter may have a fault.
What to do
Check the grid voltage and restore normal conditions.
Grid overvoltagecriticalCall your installer
Manual (PDF)
Grid voltage above allowable range
Likely cause
Check grid voltage or frequency.
What to do
Report to power grid company if voltage remains high.
Grid Short CircuitcriticalCall your installer
Manual (PDF)
AC input is short-circuited
Likely cause
Check AC input cable for shorts.
What to do
Examine AC connections for proper wiring.
Grid under voltagecriticalCall your installer
Manual (PDF)
Grid voltage is below the allowable range
Likely cause
Confirm grid availability and voltage levels.
What to do
Check power grid status.
No gridcriticalCall your installer
Manual (PDF)
No grid is detected
Likely cause
Check whether the grid terminal is firmly connected and the grid voltage is normal.
What to do
Verify grid connection and voltage.
Battery over currentwarningCall your installer
Manual (PDF)
Charge/discharge current of the battery is too high
Likely cause
Check if battery capacity exceeds allowable range.
What to do
Monitor battery current.
Bus soft start failedwarningCall your installer
Manual (PDF)
Bus voltage setup timeout
Likely cause
Voltage does not reach acceptable levels.
What to do
Wait for recovery.
DC Bus under-voltagewarningCall your installer
Manual (PDF)
The input is suddenly disconnected
Likely cause
When the fault is recovered, the inverter will automatically return to normal working state.
What to do
Restart system if the fault remains after recovery.
Inverter overvoltagewarningCall your installer
Manual (PDF)
Output voltage of the inverter is out of the range
Likely cause
Check whether the external load exceeds the specification range of the inverter.
What to do
Remove excess loads and restart.
Inverter undervoltagewarningCall your installer
Manual (PDF)
Output voltage is too low
Likely cause
Check loads and battery status.
What to do
Ensure loads are within inverter specifications.
Relay faultwarningCall your installer
Manual (PDF)
Relay malfunction
Likely cause
Fault detected in relay.
What to do
Allow the inverter to recover automatically.

Part of the Redx RX series

Compare every Redx RX variant side by side →

More Redx Technology Australia Pty Ltd Inverters

RX-2505AC (AS4777-2 2020)

2.5 kW · 1φ

RX-2505PW (AS4777-2 2020)

2.5 kW · 1φ

RX -P25k -AC (AS4777-2 2020)

25 kW · 3φ

RX-P25k (AS4777-2 2020)

25 kW · 3φ

RX -P30k -AC (AS4777-2 2020)

30 kW · 3φ

RX-P30k (AS4777-2 2020)

30 kW · 3φ

View all Redx Technology Australia Pty Ltd inverters

More from Redx Technology Australia Pty Ltd

Other CEC-approved products from Redx Technology Australia Pty Ltd available in Australia.

Redx Technology Australia Pty Ltd Batteries

RX-0050

4.608 kWh · LFP

RX-0050B

5.12 kWh · LFP

RX-196k (AS4777-2 2020)

196 kWh · LFP

RX-2505AC (AS4777-2 2020)

4.8 kWh · LFP

RX-2505PW (AS4777-2 2020)

4.8 kWh · LFP

RX-5006Plus (AS4777-2 2020)

6.69 kWh · LFP

View all Redx Technology Australia Pty Ltd batteries

View full Redx Technology Australia Pty Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Redx · RX series · CEC approved June 2023

Redx RX-5000HY

CEC listing: RX-5000HY (AS4777-2 2020)

A 5 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$2,375; Estimate for the inverter alone — your quote will vary
Rated power: 5kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole RX series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 5kW
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long Redx Technology Australia Pty Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Redx RX-5000HY, by section.

Full datasheet, by section
Specification	Value
Power & output
Nominal power	5 kW
Physical
Weight	22.5 kg
IP rating	IP65
Operating temperature	-10°C to 50°C
Installation requirements
Cable gauge	4 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

19 June 2023

Approval expiry

1 Nov 2026

Status

Active

Eligible for rebates

Yes

About Redx Technology Australia Pty Ltd

Years in AU Market

3 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$1,750–$3,000

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 21.3 kWh
Annual yield: 7,756 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

3 years in Australian market

How it compares

The Redx RX-5000HY against the closest-power inverters from other brands.

Specification	Redx RX-5000HYRedx	Energizer FORCE 5.0HSEnergizer	Energizer Force 5.0HT+Energizer

Rated power?	5 kW	5 kW	5 kW
Max efficiency?	0.0%	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Redx RX-5000HY

This warranty covers defects in materials and workmanship for a period of 10 years. The warranty does not cover damages caused by improper installation or modifications.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Warranty void if installed by non-accredited technicians or if modifications are made to the product.
Environment limits: /

Read the official warranty document (PDF)

Fault & error codes — Redx RX-5000HY

From the install manual

13 documented

Showing 13 of 13. The official install manual is the authoritative source — always confirm before acting.

Battery connection errorcriticalCall your installer
Manual (PDF)
No battery is detected
Likely cause
If the battery is connected, check whether the battery cable is securely connected and whether the battery voltage is normal.
What to do
Check battery connection and voltage.
Battery under voltage or over voltagecriticalCall your installer
Manual (PDF)
The battery voltage is abnormal, the internal circuit protection is triggered
Likely cause
Check whether the battery is correctly connected and whether the battery voltage is normal.
What to do
Ensure battery is in good condition and restart the module.
DC Bus over-voltagecriticalCall your installer
Manual (PDF)
High energy input to the inverter
Likely cause
A rapid change of power grid voltage may cause this issue, or internal dc-dc converter may have a fault.
What to do
Check the grid voltage and restore normal conditions.
Grid overvoltagecriticalCall your installer
Manual (PDF)
Grid voltage above allowable range
Likely cause
Check grid voltage or frequency.
What to do
Report to power grid company if voltage remains high.
Grid Short CircuitcriticalCall your installer
Manual (PDF)
AC input is short-circuited
Likely cause
Check AC input cable for shorts.
What to do
Examine AC connections for proper wiring.
Grid under voltagecriticalCall your installer
Manual (PDF)
Grid voltage is below the allowable range
Likely cause
Confirm grid availability and voltage levels.
What to do
Check power grid status.
No gridcriticalCall your installer
Manual (PDF)
No grid is detected
Likely cause
Check whether the grid terminal is firmly connected and the grid voltage is normal.
What to do
Verify grid connection and voltage.
Battery over currentwarningCall your installer
Manual (PDF)
Charge/discharge current of the battery is too high
Likely cause
Check if battery capacity exceeds allowable range.
What to do
Monitor battery current.
Bus soft start failedwarningCall your installer
Manual (PDF)
Bus voltage setup timeout
Likely cause
Voltage does not reach acceptable levels.
What to do
Wait for recovery.
DC Bus under-voltagewarningCall your installer
Manual (PDF)
The input is suddenly disconnected
Likely cause
When the fault is recovered, the inverter will automatically return to normal working state.
What to do
Restart system if the fault remains after recovery.
Inverter overvoltagewarningCall your installer
Manual (PDF)
Output voltage of the inverter is out of the range
Likely cause
Check whether the external load exceeds the specification range of the inverter.
What to do
Remove excess loads and restart.
Inverter undervoltagewarningCall your installer
Manual (PDF)
Output voltage is too low
Likely cause
Check loads and battery status.
What to do
Ensure loads are within inverter specifications.
Relay faultwarningCall your installer
Manual (PDF)
Relay malfunction
Likely cause
Fault detected in relay.
What to do
Allow the inverter to recover automatically.

Part of the Redx RX series

Compare every Redx RX variant side by side →

More Redx Technology Australia Pty Ltd Inverters

RX-2505AC (AS4777-2 2020)

2.5 kW · 1φ

RX-2505PW (AS4777-2 2020)

2.5 kW · 1φ

RX -P25k -AC (AS4777-2 2020)

25 kW · 3φ

RX-P25k (AS4777-2 2020)

25 kW · 3φ

RX -P30k -AC (AS4777-2 2020)

30 kW · 3φ

RX-P30k (AS4777-2 2020)

30 kW · 3φ

View all Redx Technology Australia Pty Ltd inverters