Solar inverter · Ningbo Sunways Technologies · STS-xKTL series · CEC approval expired
CEC listing: STS-9KTL (AS4777-2 2020)
A 9 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Every figure on file for the Ningbo Sunways Technologies STS-9KTL, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98.1% |
| European efficiency | 97.5% |
| DC input & MPPT | |
| MPPT trackers | 2 |
| Physical | |
| IP rating | IP65 |
| Installation requirements | |
| AC breaker | 20 A |
| Cable gauge | 4 mm² |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Ningbo Sunways Technologies STS-9KTL against the closest-power inverters from other brands.
| Specification | Ningbo Sunways Technologies STS-9KTLNingbo Sunways Technologies | Energizer Force 9.0HS+Energizer | Energizer Force 9.0SEnergizer |
|---|---|---|---|
| Rated power? | 9 kW | 9 kW | 9 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Hybrid | Solar |
| Battery ready | No | Yes | No |
| Warranty | Not on file | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
Warranty summary
This warranty covers defects in materials and workmanship. It does not cover issues caused by improper installation or environmental factors.
This warranty covers defects in materials and workmanship. It does not cover issues caused by improper installation or environmental factors.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 16 of 16. The official install manual is the authoritative source — always confirm before acting.
AC Transducer FaultwarningCall your installerAC transducer error
Bus Voltage FaultwarningCall your installerBus voltage issue
DCI FaultwarningCall your installerDC input fault
E2 FaultwarningCall your installerE2 error code
Flash FaultwarningCall your installerFlash error in the inverter
GFCI Device FaultwarningCall your installerGFCI device malfunction
GFCI FaultwarningCall your installerGround Fault Circuit Interrupter issue
Grid Frequency FaultwarningGrid frequency problem
Grid Voltage FaultwarningGrid voltage issue
Inverter Over TemperaturewarningCall your installerInverter operating too hot
ISO Over LimitationwarningCall your installerIsolation fault
Mains LostwarningLost mains supply
PV Over VoltagewarningPV string voltage too high
Relay Check FailwarningCall your installerRelay check unsuccessful
SCI FaultwarningCall your installerSystem Control Interface issue
SPI FaultwarningCall your installerSerial Peripheral Interface problem
STH-8KTL-HS (AS4777-2 2020)
8 kW · 1φ
STS-8KTL (AS4777-2 2020)
8 kW · 1φ
STT-8KTL (AS4777-2 2020)
8 kW · 1φ
STT-8KTL-P (AS4777-2 2020)
8 kW · 1φ
STS-10KTL (AS4777-2 2020)
10 kW · 1φ
STT-10KTL (AS4777-2 2020)
10 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.