Loading Solar Battery Perth...

Hybrid inverter · Deye · Single Phase Hybrid Inverter series · CEC approved July 2026

Deye SUN-8K-SG05LP1-AU-AM2-P

CEC listing: SUN-8K-SG05LP1-AU-AM2-P (AS4777-2 2020)

An 8 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Single Phase Hybrid Inverter series

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long NingBo Deye Inverter Technology Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Deye SUN-8K-SG05LP1-AU-AM2-P, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	97.6%
Physical
IP rating	IP65
Installation requirements
Top clearance	50 mm
Side clearance	50 mm
AC breaker	100 A
Cable gauge	16 mm²
Earthing method	Copper wires
DNSP pre-approval	No
Estimated install time	12 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

20 July 2026

Approval expiry

20 July 2029

Status

Active

Eligible for rebates

Yes

About NingBo Deye Inverter Technology Co Ltd

Years in AU Market

6 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Website

au.deyeinverter.com

6 years in Australian market

How it compares

The Deye SUN-8K-SG05LP1-AU-AM2-P against the closest-power inverters from other brands.

Specification	Deye SUN-8K-SG05LP1-AU-AM2-PDeye	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Deye SUN-8K-SG05LP1-AU-AM2-P

The warranty covers defects for 10 years, with a minimum of 80% capacity retained by year 10. Claims can be made via the support channels provided.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Void if not installed by accredited professionals or modified without approval.
Environment limits: No coverage for exposure to salt spray, flooding, or temperatures exceeding 60°C.

Read the official warranty document (PDF)

Fault & error codes — Deye SUN-8K-SG05LP1-AU-AM2-P

From the install manual

25 documented

Showing 25 of 25. The official install manual is the authoritative source — always confirm before acting.

F01criticalCall your installer
Manual (PDF)
DC input polarity reverse fault
Likely cause
1. Check the PV input polarity
What to do
Seek help from us, if cannot go back to normal state.
F07criticalCall your installer
Manual (PDF)
DC_START_Failure
Likely cause
1. The BUS voltage can be built from PV or battery
What to do
Restart the inverter, if the fault still exists, please contact us for help.
F15criticalCall your installer
Manual (PDF)
AC over current fault of software
Likely cause
AC side over current fault
What to do
1. Please check whether the backup load power and common load power are within the range; 2. Restart and check whether it is normal; 3. Seek help from us, if cannot go back to normal state.
F16criticalCall your installer
Manual (PDF)
AC leakage current fault
Likely cause
Leakage current fault
What to do
1. Check the PV side cable ground connection 2. Restart the system 2-3 times 3. if the fault still exists, please contact us for help.
F18criticalCall your installer
Manual (PDF)
AC over current fault of hardware
Likely cause
AC side over current fault
What to do
1. Please check whether the backup load power and common load power are within the range; 2. Restart and check whether it is normal; 3. Seek help from us, if cannot go back to normal state.
F20criticalCall your installer
Manual (PDF)
DC over current fault of the hardware
Likely cause
DC side over current fault
What to do
1. Check PV module connect and battery connect; 2. When in the off-grid mode, the inverter startup with big power load, it may report F20. Please reduce the load power connected; 3. Turn off the DC switch and AC switch and then wait one minute, then turn on the DC/AC switch again; 4. Seek help from us, if cannot go back to normal state.
F21criticalCall your installer
Manual (PDF)
Tz_HV_Overcurr_fault
Likely cause
BUS over current.
What to do
1. Check the PV input current and battery current setting 2. Restart the system 2-3 times. 3. If the fault still exists, please contact us for help.
F23criticalCall your installer
Manual (PDF)
Tz_GFCI_OC_current is transient over current
Likely cause
Leakage current fault
What to do
1. Check PV side cable ground connection. 2. Restart the system 2-3 times. 3. If the fault still exists, please contact us for help.
F24criticalCall your installer
Manual (PDF)
DC insulation failure
Likely cause
PV isolation resistance is too low
What to do
1. Check the connection of PV panels and inverter is firmly and correctly; 2. Check whether the PE cable of inverter is connected to ground; 3. Seek help from us, if cannot go back to normal state.
F34criticalCall your installer
Manual (PDF)
AC Overcurrent fault
Likely cause
1. Check the backup load connected, make sure it is in allowed power range; 2. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F46criticalCall your installer
Manual (PDF)
backup battery fault
Likely cause
1. Please check each battery status, such as voltage/SOC and parameters etc., and make sure all the parameters are the same.
What to do
2. If the fault still exists, please contact us for help.
F55criticalCall your installer
Manual (PDF)
DC busbar voltage is too high
Likely cause
BUS voltage is too high
What to do
1. Check whether battery voltage is too high; 2. Check the PV input voltage, make sure it is within the allowed range; 3. Seek help from us, if cannot go back to normal state.
F56criticalCall your installer
Manual (PDF)
DC busbar voltage is too low
Likely cause
Battery voltage low
What to do
1. Check whether battery voltage is too low; 2. If the battery voltage is too low, using PV or grid to charge the battery; 3. Seek help from us, if cannot go back to normal state.
F58criticalCall your installer
Manual (PDF)
BMS communication fault
Likely cause
1. it tells the communication between hybrid inverter and battery BMS disconnected when 'BMS_Err-Stop' is active; 2. If don't want to see this happen, you can disable 'BMS_Err-Stop' item on the LCD; 3. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F63criticalCall your installer
Manual (PDF)
ARC fault
Likely cause
1. ARC fault detection is only for the US market; 2. Check PV module cable connection and clear the fault; 3. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F64criticalCall your installer
Manual (PDF)
Heat sink high temperature failure
Likely cause
Heat sink temperature is too high
What to do
1. Check whether the work environment temperature is too high; 2. Turn off the inverter for 10 mins and restart; 3. Seek help from us, if cannot go back to normal state.
F13warning
Manual (PDF)
working mode change
Likely cause
1. When the grid type and frequency changed it will report F13; 2. When the battery mode was changed to 'No battery' mode, it will report F13; 3. For some old FW versions, it will report F13 when the system work mode changed; 4. Generally, it will disappear automatically when shows F13; 5. If still same, and turn off the DC switch and AC switch and wait for one minute and then turn on the DC/AC switch; 6. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F26warning
Manual (PDF)
The DC busbar is unbalanced
Likely cause
1. Please wait for a while and check whether it is normal; 2. When the load power of 3 phases is big different, it will report the F26; 3. When there's DC leakage current, it will report F26; 4. Restart the system 2-3 times; 5. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F29warning
Manual (PDF)
Parallel CAN Bus fault
Likely cause
1. When in parallel mode, check the parallel communication cable connection and hybrid inverter communication address setting; 2. During the parallel system startup period, inverters will report F29. But when all inverters are in ON status, it will disappear automatically; 3. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F41warning
Manual (PDF)
Parallel system stop
Likely cause
1. Check the hybrid inverter work status. If there's 1pcs hybrid inverter shutdown, all hybrid inverters will report F41 fault; 2. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F42warningCall your installer
Manual (PDF)
AC line low voltage
Likely cause
Grid voltage fault
What to do
Check the AC voltage is in the range of standard voltage specification; 2. Check whether grid AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F47warningCall your installer
Manual (PDF)
AC over frequency
Likely cause
Grid frequency out of range
What to do
1. Check the frequency is in the range of specification or not; 2. Check whether AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F48warningCall your installer
Manual (PDF)
AC lower frequency
Likely cause
Grid frequency out of range
What to do
1. Check the frequency is in the range of specification or not; 2. Check whether AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F22info
Manual (PDF)
Tz_EmergStop_Fault
Likely cause
Remotely shutdown
What to do
It tells the inverter is remotely controlled.
F62info
Manual (PDF)
DRMs0_stop
Likely cause
1. the DRM function is for the Australia market only; 2. Check the DRM function is active or not; 3. Seek help from us, if cannot go back to normal state after restarting the system.
What to do
Follow the troubleshooting steps.

Part of the Deye Single Phase Hybrid Inverter series

Compare every Deye Single Phase Hybrid Inverter variant side by side →

More NingBo Deye Inverter Technology Co Ltd Inverters

AI-W5.1-10P1-AU-B (AS4777-2 2020)

9.999 kW · 1φ

AI-W5.1-10P3-AU-B (AS4777-2 2020)

10 kW · 3φ

AI-W5.1-12P3-AU-B (AS4777-2 2020)

12 kW · 3φ

AI-W5.1-3.6P1-AU-B (AS4777-2 2020)

3.6 kW · 1φ

AI-W5.1-5P1-AU-B (AS4777-2 2020)

5 kW · 1φ

AI-W5.1-5P3-AU-B (AS4777-2 2020)

5 kW · 3φ

View all NingBo Deye Inverter Technology Co Ltd inverters

More from NingBo Deye Inverter Technology Co Ltd

Other CEC-approved products from NingBo Deye Inverter Technology Co Ltd available in Australia.

NingBo Deye Inverter Technology Co Ltd Batteries

AI-W10.2-B

10.24 kWh · LFP

AI-W15.3-B

15.36 kWh · LFP

AI-W20.4-B

20.48 kWh · LFP

AI-W25.6-B

25.6 kWh · LFP

AI-W30.7-B

30.72 kWh · LFP

AI-W5.1-B

5.12 kWh · LFP

View all NingBo Deye Inverter Technology Co Ltd batteries

View full NingBo Deye Inverter Technology Co Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Hybrid inverter · Deye · Single Phase Hybrid Inverter series · CEC approved July 2026

Deye SUN-8K-SG05LP1-AU-AM2-P

CEC listing: SUN-8K-SG05LP1-AU-AM2-P (AS4777-2 2020)

An 8 kW single-phase hybrid inverter that is battery-ready.

Installed in Perth, typical: ~$3,800; Estimate for the inverter alone — your quote will vary
Rated power: 8kW; How much solar it can run at once
Battery-ready: Yes; Hybrid: a battery plugs straight in, no second box

Datasheet (PDF)Compare inverters See the whole Single Phase Hybrid Inverter series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 8kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
Type Runs solar and a battery from one unit: Hybrid
Warranty How long NingBo Deye Inverter Technology Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the Deye SUN-8K-SG05LP1-AU-AM2-P, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	97.6%
Physical
IP rating	IP65
Installation requirements
Top clearance	50 mm
Side clearance	50 mm
AC breaker	100 A
Cable gauge	16 mm²
Earthing method	Copper wires
DNSP pre-approval	No
Estimated install time	12 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Yes

Backup capable

Yes

CEC approval details

CEC approved

20 July 2026

Approval expiry

20 July 2029

Status

Active

Eligible for rebates

Yes

About NingBo Deye Inverter Technology Co Ltd

Years in AU Market

6 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Typical installed, inverter only

$2,800–$4,800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 34.0 kWh
Annual yield: 12,410 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Website

au.deyeinverter.com

6 years in Australian market

How it compares

The Deye SUN-8K-SG05LP1-AU-AM2-P against the closest-power inverters from other brands.

Specification	Deye SUN-8K-SG05LP1-AU-AM2-PDeye	Energizer Force 8.0HS+Energizer	Energizer Force 8.0HT+Energizer

Rated power?	8 kW	8 kW	8 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	Not verified	Not verified	Not verified

Phases	Single-phase	Single-phase	Three-phase
Type	Hybrid	Hybrid	Hybrid
Battery ready	Yes	Yes	Yes
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

Deye SUN-8K-SG05LP1-AU-AM2-P

The warranty covers defects for 10 years, with a minimum of 80% capacity retained by year 10. Claims can be made via the support channels provided.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Void if not installed by accredited professionals or modified without approval.
Environment limits: No coverage for exposure to salt spray, flooding, or temperatures exceeding 60°C.

Read the official warranty document (PDF)

Fault & error codes — Deye SUN-8K-SG05LP1-AU-AM2-P

From the install manual

25 documented

Showing 25 of 25. The official install manual is the authoritative source — always confirm before acting.

F01criticalCall your installer
Manual (PDF)
DC input polarity reverse fault
Likely cause
1. Check the PV input polarity
What to do
Seek help from us, if cannot go back to normal state.
F07criticalCall your installer
Manual (PDF)
DC_START_Failure
Likely cause
1. The BUS voltage can be built from PV or battery
What to do
Restart the inverter, if the fault still exists, please contact us for help.
F15criticalCall your installer
Manual (PDF)
AC over current fault of software
Likely cause
AC side over current fault
What to do
1. Please check whether the backup load power and common load power are within the range; 2. Restart and check whether it is normal; 3. Seek help from us, if cannot go back to normal state.
F16criticalCall your installer
Manual (PDF)
AC leakage current fault
Likely cause
Leakage current fault
What to do
1. Check the PV side cable ground connection 2. Restart the system 2-3 times 3. if the fault still exists, please contact us for help.
F18criticalCall your installer
Manual (PDF)
AC over current fault of hardware
Likely cause
AC side over current fault
What to do
1. Please check whether the backup load power and common load power are within the range; 2. Restart and check whether it is normal; 3. Seek help from us, if cannot go back to normal state.
F20criticalCall your installer
Manual (PDF)
DC over current fault of the hardware
Likely cause
DC side over current fault
What to do
1. Check PV module connect and battery connect; 2. When in the off-grid mode, the inverter startup with big power load, it may report F20. Please reduce the load power connected; 3. Turn off the DC switch and AC switch and then wait one minute, then turn on the DC/AC switch again; 4. Seek help from us, if cannot go back to normal state.
F21criticalCall your installer
Manual (PDF)
Tz_HV_Overcurr_fault
Likely cause
BUS over current.
What to do
1. Check the PV input current and battery current setting 2. Restart the system 2-3 times. 3. If the fault still exists, please contact us for help.
F23criticalCall your installer
Manual (PDF)
Tz_GFCI_OC_current is transient over current
Likely cause
Leakage current fault
What to do
1. Check PV side cable ground connection. 2. Restart the system 2-3 times. 3. If the fault still exists, please contact us for help.
F24criticalCall your installer
Manual (PDF)
DC insulation failure
Likely cause
PV isolation resistance is too low
What to do
1. Check the connection of PV panels and inverter is firmly and correctly; 2. Check whether the PE cable of inverter is connected to ground; 3. Seek help from us, if cannot go back to normal state.
F34criticalCall your installer
Manual (PDF)
AC Overcurrent fault
Likely cause
1. Check the backup load connected, make sure it is in allowed power range; 2. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F46criticalCall your installer
Manual (PDF)
backup battery fault
Likely cause
1. Please check each battery status, such as voltage/SOC and parameters etc., and make sure all the parameters are the same.
What to do
2. If the fault still exists, please contact us for help.
F55criticalCall your installer
Manual (PDF)
DC busbar voltage is too high
Likely cause
BUS voltage is too high
What to do
1. Check whether battery voltage is too high; 2. Check the PV input voltage, make sure it is within the allowed range; 3. Seek help from us, if cannot go back to normal state.
F56criticalCall your installer
Manual (PDF)
DC busbar voltage is too low
Likely cause
Battery voltage low
What to do
1. Check whether battery voltage is too low; 2. If the battery voltage is too low, using PV or grid to charge the battery; 3. Seek help from us, if cannot go back to normal state.
F58criticalCall your installer
Manual (PDF)
BMS communication fault
Likely cause
1. it tells the communication between hybrid inverter and battery BMS disconnected when 'BMS_Err-Stop' is active; 2. If don't want to see this happen, you can disable 'BMS_Err-Stop' item on the LCD; 3. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F63criticalCall your installer
Manual (PDF)
ARC fault
Likely cause
1. ARC fault detection is only for the US market; 2. Check PV module cable connection and clear the fault; 3. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F64criticalCall your installer
Manual (PDF)
Heat sink high temperature failure
Likely cause
Heat sink temperature is too high
What to do
1. Check whether the work environment temperature is too high; 2. Turn off the inverter for 10 mins and restart; 3. Seek help from us, if cannot go back to normal state.
F13warning
Manual (PDF)
working mode change
Likely cause
1. When the grid type and frequency changed it will report F13; 2. When the battery mode was changed to 'No battery' mode, it will report F13; 3. For some old FW versions, it will report F13 when the system work mode changed; 4. Generally, it will disappear automatically when shows F13; 5. If still same, and turn off the DC switch and AC switch and wait for one minute and then turn on the DC/AC switch; 6. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F26warning
Manual (PDF)
The DC busbar is unbalanced
Likely cause
1. Please wait for a while and check whether it is normal; 2. When the load power of 3 phases is big different, it will report the F26; 3. When there's DC leakage current, it will report F26; 4. Restart the system 2-3 times; 5. Seek help from us, if cannot go back to normal state.
What to do
Follow the troubleshooting steps.
F29warning
Manual (PDF)
Parallel CAN Bus fault
Likely cause
1. When in parallel mode, check the parallel communication cable connection and hybrid inverter communication address setting; 2. During the parallel system startup period, inverters will report F29. But when all inverters are in ON status, it will disappear automatically; 3. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F41warning
Manual (PDF)
Parallel system stop
Likely cause
1. Check the hybrid inverter work status. If there's 1pcs hybrid inverter shutdown, all hybrid inverters will report F41 fault; 2. If the fault still exists, please contact us for help.
What to do
Follow the troubleshooting steps.
F42warningCall your installer
Manual (PDF)
AC line low voltage
Likely cause
Grid voltage fault
What to do
Check the AC voltage is in the range of standard voltage specification; 2. Check whether grid AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F47warningCall your installer
Manual (PDF)
AC over frequency
Likely cause
Grid frequency out of range
What to do
1. Check the frequency is in the range of specification or not; 2. Check whether AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F48warningCall your installer
Manual (PDF)
AC lower frequency
Likely cause
Grid frequency out of range
What to do
1. Check the frequency is in the range of specification or not; 2. Check whether AC cables are firmly and correctly connected; 3. Seek help from us, if cannot go back to normal state.
F22info
Manual (PDF)
Tz_EmergStop_Fault
Likely cause
Remotely shutdown
What to do
It tells the inverter is remotely controlled.
F62info
Manual (PDF)
DRMs0_stop
Likely cause
1. the DRM function is for the Australia market only; 2. Check the DRM function is active or not; 3. Seek help from us, if cannot go back to normal state after restarting the system.
What to do
Follow the troubleshooting steps.

Part of the Deye Single Phase Hybrid Inverter series

Compare every Deye Single Phase Hybrid Inverter variant side by side →

More NingBo Deye Inverter Technology Co Ltd Inverters

AI-W5.1-10P1-AU-B (AS4777-2 2020)

9.999 kW · 1φ

AI-W5.1-10P3-AU-B (AS4777-2 2020)

10 kW · 3φ

AI-W5.1-12P3-AU-B (AS4777-2 2020)

12 kW · 3φ

AI-W5.1-3.6P1-AU-B (AS4777-2 2020)

3.6 kW · 1φ

AI-W5.1-5P1-AU-B (AS4777-2 2020)

5 kW · 1φ

AI-W5.1-5P3-AU-B (AS4777-2 2020)

5 kW · 3φ

View all NingBo Deye Inverter Technology Co Ltd inverters