Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Must
  4. PH11-5KL3-EU

Hybrid inverter · Must · CEC approved April 2026

Must PH11-5KL3-EU

CEC listing: PH11-5KL3-EU (AS4777-2 2020)

A 5 kW three-phase hybrid inverter that is battery-ready.

Rated power
5kWHow much solar it can run at once
Battery-ready
YesHybrid: a battery plugs straight in, no second box
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

PH11-5KL3-EU: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
  • It needs a three-phase supply, so check your switchboard or ask your installer.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
5kW
How much solar it can turn into usable power at once
Max efficiency
97.6%
How much of the solar you make reaches the house
Phases
3-phase
Needs a three-phase supply, so check your switchboard
Type
Hybrid
Runs solar and a battery from one unit
Warranty
5yr
How long Must Energy (Guangdong) Technology Co Ltd stands behind it

Full datasheet

Every figure on file for the Must PH11-5KL3-EU, by section.

Full datasheet, by section
SpecificationValue
Power & output
Nominal power5 kW
Efficiency
Max efficiency97.6%
Physical
IP ratingIP66
Installation requirements
Top clearance500 mm
Side clearance500 mm
AC breaker63 A
Cable gauge10 mm²
Earthing methodTN-S
DNSP pre-approvalNo
Estimated install time8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
7 Apr 2026
Approval expiry
7 Apr 2029
Status
Active
Listed for STCs
Yes

About Must

Australian office
Not verified
Category
Unknown
CEC-approved inverters
5
CEC-approved batteries
1
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
21.3 kWh
Annual yield
7,756 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

0 years on the CEC list

How it compares

The Must PH11-5KL3-EU against the closest-power inverters from other brands.

Specification
Must PH11-5KL3-EUMust
Energizer FORCE 5.0HSEnergizer
Energizer Force 5.0HT+Energizer
Rated power?5 kW5 kW5 kW
Max efficiency?97.6%Not on fileNot on file
MPPT trackers?Not on fileNot on fileNot on file
PhasesThree-phaseSingle-phaseThree-phase
TypeHybridHybridHybrid
Battery readyYesYesYes
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • Datasheet and warranty terms and compliance certificatePDF, opens in a new tab
  • Installation guidePDF, opens in a new tab
  • User manualPDF, opens in a new tab

5-year inverter warranty

Must PH11-5KL3-EU

This inverter comes with a 5-year warranty covering defects from accredited installations. Coverage is void if modified or tampered with.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Does not transfer with the home
What voids it
Non-accredited installation, modification, or tampering voids the warranty.
Environment limits
Operating temperature range of -25°C to +60°C; derating above 45°C.
Read the official warranty document (PDF)

Fault & error codes — Must PH11-5KL3-EU

From the install manual

16 documented

Showing 16 of 16. The official install manual is the authoritative source — always confirm before acting.

  • F01criticalCall your installer
    Manual (PDF)

    DC input polarity reverse fault

    Likely cause
    Check the PV input polarity
    What to do
    Seek help from us, if can not go back to normal state.
  • F07criticalCall your installer
    Manual (PDF)

    DC_START_Failure

    Likely cause
    The BUS voltage can't be built from PV or battery.
    What to do
    Restart the inverter. If the fault still exists, please contact us for help
  • F16criticalCall your installer
    Manual (PDF)

    AC leakage current fault

    Likely cause
    Leakage current fault
    What to do
    Check the PV side cable ground connection; Restart the system 2-3 times if the fault persists.
  • F18criticalCall your installer
    Manual (PDF)

    AC over current fault of hardware

    Likely cause
    AC side over current fault
    What to do
    Check if the backup load power and common load power are within the range; Restart and check if normal.
  • F20criticalCall your installer
    Manual (PDF)

    DC over current fault of the hardware

    Likely cause
    DC side over current fault
    What to do
    Check PV module connections and battery connections; Reduce load power connected if in off-grid mode.
  • F21criticalCall your installer
    Manual (PDF)

    BUS over current

    Likely cause
    Check the PV input current and battery current setting
    What to do
    Restart the system 2-3 times; Contact support if the fault persists.
  • F23criticalCall your installer
    Manual (PDF)

    GFCI_OC_current is transient over current

    Likely cause
    Leakage current fault
    What to do
    Check PV side cable ground connection; Restart the system 2-3 times if the fault persists.
  • F24criticalCall your installer
    Manual (PDF)

    DC insulation failure

    Likely cause
    PV isolation resistance is too low
    What to do
    Check the connection of PV panels and inverter; Ensure PE cable of inverter is connected to ground.
  • F46criticalCall your installer
    Manual (PDF)

    Backup battery fault

    Likely cause
    Check each battery status, such as voltage/SOC and parameters.
    What to do
    If the fault persists, please contact us for help.
  • F56criticalCall your installer
    Manual (PDF)

    DC busbar voltage is too low

    Likely cause
    Battery voltage low
    What to do
    Check battery voltage; Charge the battery using PV or grid.
  • F64criticalCall your installer
    Manual (PDF)

    Heat sink high temperature failure

    Likely cause
    Check if the work environment temperature is too high.
    What to do
    Turn off the inverter for 10 mins and restart.
  • F13warning
    Manual (PDF)

    Working mode change

    Likely cause
    When the grid type and frequency changed it will report F13.
    What to do
    Generally, it will disappear automatically. If still same, turn off the DC and AC switch and wait one minute before turning back on.
  • F15warning
    Manual (PDF)

    AC over current fault of software

    Likely cause
    AC side over current fault
    What to do
    Check if the backup load power and common load power are within the range; Restart and check if normal.
  • F47warningCall your installer
    Manual (PDF)

    AC over frequency

    Likely cause
    Check if the frequency is within specification range.
    What to do
    Check the frequency; Ensure AC cables are correctly connected.
  • F48warningCall your installer
    Manual (PDF)

    AC lower frequency

    Likely cause
    Check if the frequency is within specification range.
    What to do
    Check the frequency; Ensure AC cables are correctly connected.
  • F22info
    Manual (PDF)

    Remotely shutdown

    Likely cause
    Indicates the inverter is remotely controlled.
    What to do
    None needed, it's functioning as expected.

More Must Energy (Guangdong) Technology Co Ltd inverters

PH11-6.5KL3 EU (AS4777-2 2020)

6.5 kW · 3φ

PH11-8KL3-EU (AS4777-2 2020)

8 kW · 3φ

PH11-10KL3-EU (AS4777-2 2020)

10 kW · 3φ

PH11-12KL3-EU (AS4777-2 2020)

12 kW · 3φ

View all Must Energy (Guangdong) Technology Co Ltd inverters

More from Must

Other CEC-approved products from Must available in Australia.

Must Batteries

LP28-48314

16.076 kWh · LFP

View all Must batteries
View full Must manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?