Loading Solar Battery Perth...

Solar inverter · Morningstar · Genstar MPPT series · CEC approved June 2024

Morningstar GS-MPPT-80M-200V

A single-phase solar inverter.

Installed in Perth, typical: Price on request; No Perth price on file for this model
Battery-ready: No; Solar-only: adding a battery later means a second inverter

Datasheet (PDF)Compare inverters See the whole Genstar MPPT series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a solar-only inverter: adding a battery later means a second inverter or an AC-coupled battery.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.
We hold no Perth installed price for it yet.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Phases Runs on a standard single-phase supply: Single
Type Runs solar only: Solar
Warranty How long Morningstar Corporation stands behind it: 5yr

Full datasheet

Every figure on file for the Morningstar GS-MPPT-80M-200V, by section.

Full datasheet, by section
Specification	Value
Physical
Operating temperature	-30°C to 45°C
Installation requirements
Top clearance	150 mm
Side clearance	75 mm
AC breaker	80 A
Cable gauge	53.5 mm²
Earthing method	Negative Ground
DNSP pre-approval	No
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Backup capable

CEC approval details

CEC approved

5 June 2024

Approval expiry

5 June 2027

Status

Active

Eligible for rebates

Yes

About Morningstar Corporation

Years in AU Market

2 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Price on request

We don’t hold a Perth price for this inverter. Ask for quotes and we’ll benchmark what comes back against the ones we do price.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

2 years in Australian market

Documents

5-year inverter warranty

Morningstar GS-MPPT-80M-200V

This warranty covers defects in materials and workmanship for five years. Exclusions include damage from improper use and exceeding ratings. For claims, contact an authorized dealer for assistance.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Damage by accident, negligence, abuse or improper use; PV or load currents exceeding the ratings of the product; Unauthorized product modification or attempted repair; Damage occurring during shipment; Damage resulting from acts of nature.
Environment limits: /

Read the official warranty document (PDF)

Fault & error codes — Morningstar GS-MPPT-80M-200V

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

Charging Status High Heatsink TemperaturecriticalCall your installer
Manual (PDF)
Heatsink temperature is too high.
Likely cause
Excessive current or poor ventilation.
What to do
Reduce load or improve ventilation.
Firmware Update FailurecriticalCall your installer
Manual (PDF)
Firmware update was not successful.
Likely cause
Failed firmware update process.
What to do
Retry firmware update.
Heatsink Temperature Sensor Open / ShortedcriticalCall your installer
Manual (PDF)
The heatsink temperature sensor is damaged.
Likely cause
Faulty heatsink temperature sensor.
What to do
Contact your Authorized Morningstar Dealer for service.
High Battery Voltage Disconnect (HVD)criticalCall your installer
Manual (PDF)
Battery voltage is above normal operating limits.
Likely cause
Other charging sources charging the battery above regulation voltage.
What to do
Disconnect other charging sources, check settings.
High Input Voltage Current LimitcriticalCall your installer
Manual (PDF)
The solar input voltage is too high.
Likely cause
Solar array Voc approaching maximum input voltage rating.
What to do
Ensure array Voc does not exceed 200V.
High Temperature Current LimitcriticalCall your installer
Manual (PDF)
Heatsink temperature exceeds safe limits.
Likely cause
Insufficient airflow or excessively high ambient temperature.
What to do
Provide better airflow or move controller to cooler location.
Battery Sense Out of Range / Disconnectedwarning
Manual (PDF)
Battery sense wire is disconnected. Inspect the battery sense connections.
Likely cause
A battery sense wire is disconnected.
What to do
Inspect battery sense connections.
Current Limitwarning
Manual (PDF)
The array power exceeds the rating of the controller.
Likely cause
GenStar MPPT is limiting battery current to the maximum current rating.
What to do
Check array power and reduce if necessary.
Load Short Circuitwarning
Manual (PDF)
Detected a short circuit in load wiring.
Likely cause
Faulty wiring or component causing short circuit.
What to do
Inspect load wiring for shorts.
RTS Openwarning
Manual (PDF)
Remote Temperature Sensor not connected.
Likely cause
RTS connection is faulty or disconnected.
What to do
Reconnect RTS sensor for proper operation.
UncalibratedwarningCall your installer
Manual (PDF)
The controller was not factory calibrated.
Likely cause
Lack of calibration.
What to do
Contact your Authorized Morningstar Dealer for service.

Part of the Morningstar Genstar MPPT series

Compare every Morningstar Genstar MPPT variant side by side →

More Morningstar Corporation Inverters

GS-MPPT-100M-200V

0 kW · 1φ

GS-MPPT-60M-200V

0 kW · 1φ

View all Morningstar Corporation inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Solar inverter · Morningstar · Genstar MPPT series · CEC approved June 2024

Morningstar GS-MPPT-80M-200V

A single-phase solar inverter.

Installed in Perth, typical: Price on request; No Perth price on file for this model
Battery-ready: No; Solar-only: adding a battery later means a second inverter

Datasheet (PDF)Compare inverters See the whole Genstar MPPT series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a solar-only inverter: adding a battery later means a second inverter or an AC-coupled battery.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.
We hold no Perth installed price for it yet.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Phases Runs on a standard single-phase supply: Single
Type Runs solar only: Solar
Warranty How long Morningstar Corporation stands behind it: 5yr

Full datasheet

Every figure on file for the Morningstar GS-MPPT-80M-200V, by section.

Full datasheet, by section
Specification	Value
Physical
Operating temperature	-30°C to 45°C
Installation requirements
Top clearance	150 mm
Side clearance	75 mm
AC breaker	80 A
Cable gauge	53.5 mm²
Earthing method	Negative Ground
DNSP pre-approval	No
Estimated install time	8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Backup capable

CEC approval details

CEC approved

5 June 2024

Approval expiry

5 June 2027

Status

Active

Eligible for rebates

Yes

About Morningstar Corporation

Years in AU Market

2 years

Australian Office

Not verified

CEC-Approved Batteries

CEC-Approved Panels

What it costs in Perth

Price on request

We don’t hold a Perth price for this inverter. Ask for quotes and we’ll benchmark what comes back against the ones we do price.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

2 years in Australian market

Documents

5-year inverter warranty

Morningstar GS-MPPT-80M-200V

This warranty covers defects in materials and workmanship for five years. Exclusions include damage from improper use and exceeding ratings. For claims, contact an authorized dealer for assistance.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Does not transfer with the home
What voids it: Damage by accident, negligence, abuse or improper use; PV or load currents exceeding the ratings of the product; Unauthorized product modification or attempted repair; Damage occurring during shipment; Damage resulting from acts of nature.
Environment limits: /

Read the official warranty document (PDF)

Fault & error codes — Morningstar GS-MPPT-80M-200V

From the install manual

11 documented

Showing 11 of 11. The official install manual is the authoritative source — always confirm before acting.

Charging Status High Heatsink TemperaturecriticalCall your installer
Manual (PDF)
Heatsink temperature is too high.
Likely cause
Excessive current or poor ventilation.
What to do
Reduce load or improve ventilation.
Firmware Update FailurecriticalCall your installer
Manual (PDF)
Firmware update was not successful.
Likely cause
Failed firmware update process.
What to do
Retry firmware update.
Heatsink Temperature Sensor Open / ShortedcriticalCall your installer
Manual (PDF)
The heatsink temperature sensor is damaged.
Likely cause
Faulty heatsink temperature sensor.
What to do
Contact your Authorized Morningstar Dealer for service.
High Battery Voltage Disconnect (HVD)criticalCall your installer
Manual (PDF)
Battery voltage is above normal operating limits.
Likely cause
Other charging sources charging the battery above regulation voltage.
What to do
Disconnect other charging sources, check settings.
High Input Voltage Current LimitcriticalCall your installer
Manual (PDF)
The solar input voltage is too high.
Likely cause
Solar array Voc approaching maximum input voltage rating.
What to do
Ensure array Voc does not exceed 200V.
High Temperature Current LimitcriticalCall your installer
Manual (PDF)
Heatsink temperature exceeds safe limits.
Likely cause
Insufficient airflow or excessively high ambient temperature.
What to do
Provide better airflow or move controller to cooler location.
Battery Sense Out of Range / Disconnectedwarning
Manual (PDF)
Battery sense wire is disconnected. Inspect the battery sense connections.
Likely cause
A battery sense wire is disconnected.
What to do
Inspect battery sense connections.
Current Limitwarning
Manual (PDF)
The array power exceeds the rating of the controller.
Likely cause
GenStar MPPT is limiting battery current to the maximum current rating.
What to do
Check array power and reduce if necessary.
Load Short Circuitwarning
Manual (PDF)
Detected a short circuit in load wiring.
Likely cause
Faulty wiring or component causing short circuit.
What to do
Inspect load wiring for shorts.
RTS Openwarning
Manual (PDF)
Remote Temperature Sensor not connected.
Likely cause
RTS connection is faulty or disconnected.
What to do
Reconnect RTS sensor for proper operation.
UncalibratedwarningCall your installer
Manual (PDF)
The controller was not factory calibrated.
Likely cause
Lack of calibration.
What to do
Contact your Authorized Morningstar Dealer for service.

Part of the Morningstar Genstar MPPT series

Compare every Morningstar Genstar MPPT variant side by side →

More Morningstar Corporation Inverters

GS-MPPT-100M-200V

0 kW · 1φ

GS-MPPT-60M-200V

0 kW · 1φ

View all Morningstar Corporation inverters

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data