Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. Hoymiles
  4. HYS-3.0LV-AUG1

Hybrid inverter · Hoymiles · CEC approved September 2023

Hoymiles HYS-3.0LV-AUG1

CEC listing: HYS-3.0LV-AUG1 (AS4777-2 2020)

A 3 kW single-phase hybrid inverter that is battery-ready.

Rated power
3kWHow much solar it can run at once
Battery-ready
YesHybrid: a battery plugs straight in, no second box
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

HYS-3.0LV-AUG1: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a hybrid inverter: solar and a battery run from the one unit, so adding a battery later doesn't need a second box.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
3kW
How much solar it can turn into usable power at once
Max efficiency
97.6%
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
MPPT trackers
1
One string of panels, tuned as a whole
Type
Hybrid
Runs solar and a battery from one unit
Warranty
5yr
How long Hoymiles Power Electronics Inc stands behind it

Full datasheet

Every figure on file for the Hoymiles HYS-3.0LV-AUG1, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency97.6%
DC input & MPPT
MPPT trackers1
Physical
IP ratingIP65
Installation requirements
AC breaker20 A
Cable gauge6 mm²

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
Yes
Backup capable
Yes
CEC approved
27 Sept 2023
Approval expiry
26 Nov 2026
Status
Active
Listed for STCs
Yes

About Hoymiles

Years on the CEC list
7 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
68
CEC-approved batteries
32
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
12.8 kWh
Annual yield
4,654 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.hoymiles.com/au
7 years on the CEC list

How it compares

The Hoymiles HYS-3.0LV-AUG1 against the closest-power inverters from other brands.

Specification
Hoymiles HYS-3.0LV-AUG1Hoymiles
Energizer FORCE 3.0HSEnergizer
Energizer Force 3SEnergizer
Rated power?3 kW3 kW3 kW
Max efficiency?97.6%Not on fileNot on file
MPPT trackers?1Not on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeHybridHybridSolar
Battery readyYesYesNo
Warranty5 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty terms and installation guide and user manualPDF, opens in a new tab
  • Compliance certificateOpens in a new tab

5-year inverter warranty

Hoymiles HYS-3.0LV-AUG1

This warranty covers defects in materials and workmanship for 5 years. It excludes damages from improper installation, modifications, or environmental factors such as extreme temperatures.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Pro-rata — value reduces with age
If you sell the home
Transfers to the next homeowner
What voids it
Non-accredited installations, unauthorized modifications, failure to follow installation and safety instructions
Environment limits
High temperatures causing derating, relative humidity above 95%, direct exposure to corrosive substances
Read the official warranty document (PDF)

Fault & error codes — Hoymiles HYS-3.0LV-AUG1

From the install manual

23 documented

Showing 23 of 23. The official install manual is the authoritative source — always confirm before acting.

  • ARC_FAULTcriticalCall your installer
    Manual (PDF)

    Arc Fault

    Likely cause
    Detected arc in the wiring.
    What to do
    Check wiring for damage and ensure proper connections.
  • BATTERY_REVERSE_CONNECTIONcriticalCall your installer
    Manual (PDF)

    Battery Reverse Connection

    Likely cause
    Battery wiring is incorrect.
    What to do
    Verify battery polarity connections immediately.
  • ISOLATION_FAULTcriticalCall your installer
    Manual (PDF)

    Isolation Fault

    Likely cause
    Insulation impedance too low.
    What to do
    Measure insulation resistance and rectify.
  • OVER_TEMPERATUREcriticalCall your installer
    Manual (PDF)

    Over Temperature

    Likely cause
    Internal temperature exceeds limits.
    What to do
    Ensure proper installation and ventilation; check for fan faults.
  • PV_REVERSE_CONNECTIONcriticalCall your installer
    Manual (PDF)

    PV Reverse Connection

    Likely cause
    PV strings are connected with reverse polarity.
    What to do
    Disconnect DC switch and correct polarity when necessary.
  • RELAY_FAULTcriticalCall your installer
    Manual (PDF)

    Relay Fault

    Likely cause
    Relay self-check failure.
    What to do
    Restart inverter and contact support if issue persists.
  • BATTERY_VOLTAGE_FAULTwarningCall your installer
    Manual (PDF)

    Battery Voltage Fault

    Likely cause
    Battery voltage exceeds limits.
    What to do
    Ensure battery input voltage is within the normal range.
  • BMS_BATTERY_ALARMwarningCall your installer
    Manual (PDF)

    BMS Battery Alarm

    Likely cause
    Battery fault detected from BMS.
    What to do
    Restart battery; contact the manufacturer if fault persists.
  • BMS_BATTERY_FAULTwarningCall your installer
    Manual (PDF)

    BMS Battery Fault

    Likely cause
    Battery fault detected from BMS.
    What to do
    Restart battery; contact the manufacturer if fault persists.
  • BMS_COMMUNICATION_FAULTwarningCall your installer
    Manual (PDF)

    BMS Communication Fault

    Likely cause
    Error in BMS communication.
    What to do
    Check BMS communication cable and reconnections.
  • EPS_LOAD_OVERPOWERwarningCall your installer
    Manual (PDF)

    EPS Load Overpower

    Likely cause
    Load exceeds EPS capacity.
    What to do
    Reduce EPS load.
  • Grid Overvoltagewarning
    Manual (PDF)

    The grid voltage is higher than the permissible range.

    Likely cause
    Grid voltage exceeds specifications.
    What to do
    Wait for grid to recover; if frequent, check voltage settings and contact support.
  • Grid Undervoltagewarning
    Manual (PDF)

    The grid voltage is lower than the permissible range.

    Likely cause
    Low grid voltage conditions.
    What to do
    Monitor grid voltage; if persistent, check connection and contact support.
  • GRID_OVERFREQUENCYwarningCall your installer
    Manual (PDF)

    Grid Overfrequency

    Likely cause
    The grid frequency is higher than the permissible range.
    What to do
    Monitor and ensure grid frequency is stable. Contact support if issue persists.
  • GRID_OVERVOLTAGwarningCall your installer
    Manual (PDF)

    Grid Overvoltage

    Likely cause
    The grid voltage is higher than the permissible range.
    What to do
    Generally, the inverter will reconnect to the grid after the grid recovers. If the alarm occurs frequently, check the safety country setting and ensure grid voltage stability.
  • GRID_UNDERFREQUENCYwarningCall your installer
    Manual (PDF)

    Grid Underfrequency

    Likely cause
    The grid frequency is lower than permissible limits.
    What to do
    Ensure grid frequency stability and consult support if persistent.
  • GRID_UNDERVOLTAGwarningCall your installer
    Manual (PDF)

    Grid Undervoltage

    Likely cause
    The grid voltage is lower than the permissible range.
    What to do
    The inverter will reconnect to the grid after recovery. Check safety setting, grid voltage stability, and AC cable connections if the alarm persists.
  • METER_COMMUNICATION_FAULTwarningCall your installer
    Manual (PDF)

    Meter Communication Fault

    Likely cause
    Failure in communication with the meter.
    What to do
    Inspect communication cable and connections.
  • METER_REVERSE_CONNECTIONwarningCall your installer
    Manual (PDF)

    Meter Reverse Connection

    Likely cause
    The meter or CT is reversely connected.
    What to do
    Check installation instructions for correct setup.
  • NO_GRIDwarningCall your installer
    Manual (PDF)

    No Grid

    Likely cause
    The inverter has detected no grid connection.
    What to do
    Check grid supply reliability and connection integrity.
  • PV_OVERVOLTAGEwarningCall your installer
    Manual (PDF)

    PV Overvoltage

    Likely cause
    PV voltage higher than permissible range.
    What to do
    Verify specifications of PV modules connected.
  • PV_UNDERVOLTAGEwarningCall your installer
    Manual (PDF)

    PV Undervoltage

    Likely cause
    PV voltage is lower than the permissible range.
    What to do
    Inspect DC cable connections and module conditions.
  • RESIDUAL_CURRENT_FAULTwarningCall your installer
    Manual (PDF)

    Residual Current Fault

    Likely cause
    High leakage current.
    What to do
    Reduce humidity in the environment. Check insulation if alarm persists.

More Hoymiles Power Electronics Inc inverters

HYS-3.6LV-AUG1 (AS4777-2 2020)

3.68 kW · 1φ

HMS-2000-4T (AS4777-2 2020)

2 kW · 1φ

HMS-2000C-4T (AS4777-2 2020)

2 kW · 1φ

HMS-1800-4T (AS4777-2 2020)

1.8 kW · 1φ

HMS-1800C-4T (AS4777-2 2020)

1.8 kW · 1φ

HMS-1600-4T (AS4777-2 2020)

1.6 kW · 1φ

View all Hoymiles Power Electronics Inc inverters

More from Hoymiles

Other CEC-approved products from Hoymiles available in Australia.

Hoymiles Batteries

HBX-10LV-G1

9.21 kWh · LFP

HBX-5LV-G1

4.6 kWh · LFP

HiOne-10S-16B-G3-AU (AS4777-2 2020)

15.6 kWh · LFP

HiOne-10S-24B-G3-AU (AS4777-2 2020)

23.4 kWh · LFP

HiOne-10S-32B-G3-AU (AS4777-2 2020)

31.2 kWh · LFP

HiOne-10T-16B-G3-AU (AS4777-2 2020)

15.6 kWh · LFP

View all Hoymiles batteries
View full Hoymiles manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?