Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · DMEGC · DM-INV-TPH series · CEC approved January 2026
CEC listing: DM-INV-TPH5K (AS4777-2 2020)
A 5 kW three-phase hybrid inverter that is battery-ready.
Read from the figures on this page — no review written yet
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Needs a three-phase supply — check your switchboard
MPPT trackers
3 roof faces can be tuned independently
Type
Runs solar and a battery from one unit
Warranty
How long Hengdian Group DMEGC Magnetics CO LTD stands behind it
Every figure on file for the DMEGC DM-INV-TPH5K, by section.
| Specification | Value |
|---|---|
| Efficiency | |
| Max efficiency | 98% |
| DC input & MPPT | |
| MPPT trackers | 3 |
| Physical | |
| Weight | 29 kg |
| IP rating | IP65 |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 200 mm |
| AC breaker | 16 A |
| Cable gauge | 6 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
23 Jan 2026
Approval expiry
23 Jan 2029
Status
Active
Eligible for rebates
Yes
Years in AU Market
4 years
Australian Office
Not verified
CEC-Approved Batteries
10
CEC-Approved Panels
135
Category
Budget
Typical installed, inverter only
$1,750–$3,000
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.dmegcsolar.comThe DMEGC DM-INV-TPH5K against the closest-power inverters from other brands.
| Specification | DMEGC DM-INV-TPH5KDMEGC | Energizer FORCE 5.0HSEnergizer | Energizer Force 5.0HT+Energizer |
|---|---|---|---|
| Rated power? | 5 kW | 5 kW | 5 kW |
| Max efficiency? | 98.0%best value | 0.0% | 0.0% |
| MPPT trackers? | 3 | Not verified | Not verified |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Covers manufacturer defects for 120 months. Warranty void if tampered; contact support to claim.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the DMEGC DM-INV-TPH series
Compare every DMEGC DM-INV-TPH variant side by side →
DM-INV-SPH3.6K (AS4777-2 2020)
3.6 kW · 1φ
DM-INV-SPH5K (AS4777-2 2020)
5 kW · 1φ
DM-INV-TPH10K (AS4777-2 2020)
10 kW · 3φ
DM-INV-TPH4K (AS4777-2 2020)
4 kW · 3φ
DM-INV-TPH6K (AS4777-2 2020)
6 kW · 3φ
DM-INV-TPH8K (AS4777-2 2020)
8 kW · 3φ
Other CEC-approved products from Hengdian Group DMEGC Magnetics CO LTD available in Australia.
H02-10
10.24 kWh · LFP
H02-15
15.36 kWh · LFP
H02-20
20.48 kWh · LFP
H02-25
25.6 kWh · LFP
H02-30
30.72 kWh · LFP
H02-35
35.84 kWh · LFP
DM255M10T-B32HBT (IEC 61215-2021)
255W · 15.0% · Mono PERC
DM260M10T-B32HBT (IEC 61215-2021)
260W · 15.0% · Mono PERC
DM265M10T-B32HBT (IEC 61215-2021)
265W · 15.0% · Mono PERC
DM365M6-60HBB
365W · 18.7% · Mono PERC
DM370M6-60HBB
370W · 18.9% · Mono PERC
DM375M6-60HBB
375W · 19.2% · Mono PERC
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.