Hybrid inverter · SAJ · CEC approved August 2023
CEC listing: H2-6K-S3 (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready and listed for battery storage on Synergy's list.
SAJ's H2 hybrid inverters come from Guangzhou Sanjing Electric, a power-electronics maker. The H2 works with both low-voltage and high-voltage batteries, which widens the choice of battery.
The eSolar platform shows live performance. The H2 comes in single-phase and three-phase versions.
The numbers that matter for a home. The full datasheet is below.
Every figure on file for the SAJ H2-6K-S3, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 6 kW |
| Maximum power | 6 kW |
| Apparent power | 6 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 97.6% |
| European efficiency | 97% |
| CEC-weighted efficiency | 97% |
| DC input & MPPT | |
| MPPT trackers | 3 |
| Max input voltage | 600 V |
| MPPT voltage min | 90 V |
| MPPT voltage max | 550 V |
| Max input current | 22 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 6 kW |
| Physical | |
| Dimensions (H×W×D) | 431 × 549 × 223 mm |
| Weight | 26 kg |
| IP rating | IP65 |
| Cooling | Natural Convection |
| Operating temperature | -40°C to 60°C |
| Rebate eligibility | |
| Listed for battery storage on Synergy's list | Yes |
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 200 mm |
| AC breaker | 100 A |
| Cable gauge | 16 mm² |
| Earthing method | MEN |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Listed for battery storage on Synergy's list. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Website
www.saj-electric.comThe SAJ H2-6K-S3 against the closest-power inverters from other brands.
| Specification | SAJ H2-6K-S3SAJ | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | 97.6% | Not on file | Not on file |
| MPPT trackers? | 3 | Not on file | Not on file |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 5 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
This warranty covers 5 years of service against defects; it is void if the product is modified or not installed by professionals. To claim, visit our website for instructions.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
From the install manual
Showing 10 of 10. The official install manual is the authoritative source — always confirm before acting.
1criticalCall your installerMaster Relay Error
13criticalCall your installerMaster Phase3 Voltage High
2criticalCall your installerMaster EEPROM Error
3criticalCall your installerMaster Temperature High Error
31criticalCall your installerISO Error
9criticalCall your installerMaster Phase1 Voltage High
4warningCall your installerMaster Temperature Low Error
5warningCall your installerLost Communication M<->S
6warningCall your installerGFCI Device Error
96warningCall your installerBattery Discharge Voltage Low
H2-6K-S2 (AS4777-2 2020)
6 kW · 1φ
R5-6K-S2-15 (AS4777-2 2020)
6 kW · 1φ
R5-6K-S2 (AS4777-2 2020)
6 kW · 1φ
R5-6K-T2-15 (AS4777-2 2020)
6 kW · 1φ
R6-6K-S2-X (AS4777-2 2020)
6 kW · 1φ
R6-6K-S3 (AS4777-2 2020)
6 kW · 1φ
Other CEC-approved products from SAJ available in Australia.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.