Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. GoodWe
  4. GW8500-MS-30

Solar inverter · GoodWe · CEC approved May 2023

GoodWe GW8500-MS-30

CEC listing: GW8500-MS-30 (AS4777-2 2020)

An 8.5 kW single-phase solar inverter.

Rated power
8.5kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

GW8500-MS-30: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
NoDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
8.5kW
How much solar it can turn into usable power at once
Max efficiency
Not on file: we don't have this figure from the manufacturer's documents yet
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
MPPT trackers
3
3 roof faces can be tuned independently
Type
Solar
Runs solar only
Warranty
10yr
How long GoodWe Technologies Co Ltd stands behind it

Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us

Full datasheet

Every figure on file for the GoodWe GW8500-MS-30, by section.

Full datasheet, by section
SpecificationValue
DC input & MPPT
MPPT trackers3
Installation requirements
Top clearance100 mm
Side clearance100 mm
AC breaker40 A
Cable gauge4 mm²
Earthing methodMEN
DNSP pre-approvalNo
Estimated install time8 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
19 May 2023
Approval expiry
30 Dec 2026
Status
Active
Listed for STCs
Yes

About GoodWe

Years on the CEC list
12 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
229
CEC-approved batteries
30
CEC-approved panels
168
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • GoodWe Technologies Co Ltd batteries and panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
36.1 kWh
Annual yield
13,186 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.goodwe.com.au
12 years on the CEC list

How it compares

The GoodWe GW8500-MS-30 against the closest-power inverters from other brands.

Specification
GoodWe GW8500-MS-30GoodWe
GoodWe GEP8.5-1-10GoodWe
GoodWe GEP8.5-1C-30GoodWe
Rated power?8.5 kW8.5 kW8.5 kW
Max efficiency?Not on fileNot on fileNot on file
MPPT trackers?3Not on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeSolarSolarSolar
Battery readyNoNoNo
Warranty10 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guide and user manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

10-year inverter warranty

GoodWe GW8500-MS-30

GOODWE warrants inverters for up to 10 years, covering parts and labor for defects. Warranty voided for unauthorized modifications. Claims via your distributor or installer.

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Unauthorized installation, modifications, or tampering.
Environment limits
Exposure to saltwater, harsh environmental conditions without prior approval from GOODWE.
Read the official warranty document (PDF)

Fault & error codes — GoodWe GW8500-MS-30

From the install manual

18 documented

Showing 18 of 18. The official install manual is the authoritative source — always confirm before acting.

  • 2criticalCall your installer
    Manual (PDF)

    Grid Overvoltage

    Likely cause
    The grid voltage exceeds the permissible range, or the duration of high voltage exceeds the requirement of HVRT.
    What to do
    Check whether the grid voltage is within the permissible range; contact local power company if it exceeds the range.
  • 3criticalCall your installer
    Manual (PDF)

    Grid Undervoltage

    Likely cause
    The grid voltage is lower than the permissible range, or the duration of low voltage exceeds the HW requirement.
    What to do
    Check whether the grid frequency is within the permissible range; contact local power company.
  • 4criticalCall your installer
    Manual (PDF)

    Grid Overfrequency

    Likely cause
    Utility grid exception. The actual grid frequency exceeds the requirement of local standards.
    What to do
    Check whether the grid frequency is within the permissible range; contact local power company if it exceeds the range.
  • 7criticalCall your installer
    Manual (PDF)

    Cavity Overtemperature

    Likely cause
    The inverter is installed in a place with poor ventilation or high ambient temperature.
    What to do
    Check the ventilation; improve air circulation if temperature is high.
  • 8criticalCall your installer
    Manual (PDF)

    Grid Frequency Instability

    Likely cause
    Utility grid exception; actual grid frequency change rate does not meet local standards.
    What to do
    Contact dealer or after-sales service if frequency issues persist.
  • DC Arc FaultcriticalCall your installer
    Manual (PDF)

    A fault in the DC circuit detected.

    Likely cause
    The DC terminal is not firmly connected or the DC cable is broken.
    What to do
    Read the Quick Installation Guide and check whether the cables are connected properly.
  • Grid OvervoltagecriticalCall your installer
    Manual (PDF)

    The grid voltage exceeds acceptable limits.

    Likely cause
    The duration of high voltage exceeds the requirement of HVRT.
    What to do
    If the problem occurs frequently, check whether the grid voltage is within the permissible range. Contact the local power company if necessary.
  • Grid Rapid OvervoltagecriticalCall your installer
    Manual (PDF)

    The grid voltage is temporarily very high.

    Likely cause
    Grid voltage is abnormal or ultra-high.
    What to do
    Contact the local power company if the grid voltage exceeds the permissible range.
  • Grid UndervoltagecriticalCall your installer
    Manual (PDF)

    The grid voltage is below acceptable limits.

    Likely cause
    The duration of low voltage exceeds the requirement of LVRT.
    What to do
    If the problem occurs frequently, check whether the grid voltage is within the permissible range. Contact the local power company if necessary.
  • Low Insulation Res.(Earth fault alarm)criticalCall your installer
    Manual (PDF)

    Insulation resistance is low, indicating a potential fault.

    Likely cause
    The PV string may be short-circuited to PE or exposed to moisture.
    What to do
    Check whether the resistance of the PV string to PE exceeds 50kΩ. If no, check the short circuit point.
  • Utility Losscritical
    Manual (PDF)

    The inverter has lost connection to the utility grid.

    Likely cause
    Utility grid power fails or the AC cable is disconnected.
    What to do
    The alarm is automatically cleared after the grid power supply is restored. Check whether the AC cable is connected and the AC breaker is on.
  • 1warning
    Manual (PDF)

    Utility Loss

    Likely cause
    Utility grid power fails or AC cable is disconnected
    What to do
    The alarm is automatically cleared after the grid power supply is restored; check whether the AC cable is connected and the AC breaker is on.
  • 6warningCall your installer
    Manual (PDF)

    DC Arc Fault

    Likely cause
    The DC terminal is not firmly connected or the DC cable is broken.
    What to do
    Read the Quick Installation Guide and check whether the cables are connected properly.
  • Anti-islandingwarningCall your installer
    Manual (PDF)

    The inverter has detected a disconnection from the grid.

    Likely cause
    The utility grid is disconnected according to safety regulations.
    What to do
    Check whether the utility grid is disconnected. Contact the dealer or the after-sales service.
  • Cavity OvertemperaturewarningCall your installer
    Manual (PDF)

    The inverter's internal temperature is too high.

    Likely cause
    The inverter is installed in an area with poor ventilation or exceeding temperature limits.
    What to do
    Check the ventilation and ambient temperature at the installation point, and improve ventilation if necessary.
  • Grid OverfrequencywarningCall your installer
    Manual (PDF)

    The actual grid frequency is too high.

    Likely cause
    Utility grid exception.
    What to do
    If the problem occurs frequently, check whether the grid frequency is within the permissible range. Contact the local power company if necessary.
  • Grid UnderfrequencywarningCall your installer
    Manual (PDF)

    The actual grid frequency is too low.

    Likely cause
    Utility grid exception.
    What to do
    If the problem occurs frequently, check whether the grid frequency is within the permissible range. Contact the local power company if necessary.
  • 5info
    Manual (PDF)

    Anti-islanding

    Likely cause
    The utility grid is disconnected according to safety regulations, but the grid voltage is maintained due to loads.
    What to do
    Check whether the utility grid is disconnected; contact dealer if issue persists.

More GoodWe Technologies Co Ltd inverters

GEP8.5-1-10 (AS4777-2 2020)

8.5 kW · 1φ

GEP8.5-1C-30 (AS4777-2 2020)

8.5 kW · 1φ

GW8.5K-MS-G40 (AS4777-2 2020)

8.5 kW · 1φ

GW8500-MS (AS4777-2 2020)

8.5 kW · 1φ

GEH8.6-1U-10 (AS4777-2 2020)

8.6 kW · 1φ

GW8.6K-EHB-AU-G11 (AS4777-2 2020)

8.6 kW · 1φ

View all GoodWe Technologies Co Ltd inverters

More from GoodWe

Other CEC-approved products from GoodWe available in Australia.

GoodWe Batteries

GW100KWH-D-10

100.8 kWh · LFP

GW102.4-BAT-AC-G10

100 kWh · LFP

GW112.6-BAT-AC-G10

110 kWh · LFP

GW5.1-BAT-D-G20

5 kWh · LFP

GW5.1-BAT-D-G21

5 kWh · LFP

GW6.0-BAT-D-G20

5.9 kWh · LFP

View all GoodWe batteries

GoodWe Solar Panels

BMM-T3/108A(505W)

505W

BMM-T3/108A(510W)

510W

BMM-T3/108A(515W)

515W

BMM-T3/120A(565W)

565W

BMM-T3/120A(570W)

570W

BMM-T3/120A(575W)

575W

View all GoodWe panels
View full GoodWe manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?