Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · GoodWe · ESA series · CEC approved July 2025
CEC listing: GW3.6K-EHA-G20 (AS4777-2 2020)
A 3.6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Max efficiency
How much of the solar you make reaches the house
Phases
Runs on a standard single-phase supply
MPPT trackers
One string of panels, tuned as a whole
Type
Runs solar and a battery from one unit
Warranty
How long GoodWe Technologies Co Ltd stands behind it
Every figure on file for the GoodWe GW3.6K-EHA-G20, by section.
| Specification | Value |
|---|---|
| Power & output | |
| Nominal power | 3.6 kW |
| Maximum power | 4 kW |
| Apparent power | 5 kVA |
| Phases | 1 |
| Efficiency | |
| Max efficiency | 97.5% |
| European efficiency | 96.5% |
| CEC-weighted efficiency | 96% |
| DC input & MPPT | |
| MPPT trackers | 1 |
| Max input voltage | 500 V |
| MPPT voltage min | 80 V |
| MPPT voltage max | 450 V |
| Max input current | 12 A |
| Battery & backup | |
| Battery compatible | Yes |
| Backup capable | Yes |
| Continuous backup | 2.5 kW |
| Physical | |
| Dimensions (H×W×D) | 430 × 310 × 140 mm |
| Weight | 10 kg |
| IP rating | IP65 |
| Cooling | Natural |
| Operating temperature | -25°C to 60°C |
| Installation requirements | |
| Top clearance | 300 mm |
| Side clearance | 300 mm |
| AC breaker | 16 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
25 July 2025
Approval expiry
25 July 2028
Status
Active
Eligible for rebates
Yes
Years in AU Market
12 years
Australian Office
Yes
CEC-Approved Batteries
30
CEC-Approved Panels
168
Category
Mid-Tier
Typical installed, inverter only
$1,260–$2,160
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.goodwe.com.auThe GoodWe GW3.6K-EHA-G20 against the closest-power inverters from other brands.
| Specification | GoodWe GW3.6K-EHA-G20GoodWe | Energizer Force 3.6SEnergizer | Afore New Energy Technology AF3.6K-SL-1Afore New Energy Technology |
|---|---|---|---|
| Rated power? | 3.6 kW | 3.6 kW | 3.6 kW |
| Max efficiency? | 97.5%best value | 0.0% | 0.0% |
| MPPT trackers? | 1 | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Solar | Hybrid |
| Battery ready | Yes | No | Yes |
| Warranty | 10 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
The GOODWE warranty covers manufacturing and material defects for up to 10 years. It excludes damages from improper installation and environmental conditions, and claims must be made within one month of defects appearing.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the GoodWe ESA series
Compare every GoodWe ESA variant side by side →
GEH10-1U-10 (AS4777-2 2020)
10 kW · 1φ
GEH15-3U-10 (AS4777-2 2020)
15 kW · 1φ
GEH20-3U-10 (AS4777-2 2020)
20 kW · 1φ
GEH25-3U-10 (AS4777-2 2020)
25 kW · 1φ
GEH29.9-3U-10 (AS4777-2 2020)
29.9 kW · 1φ
GEH5.0-1U-10 (AS4777-2 2020)
5 kW · 1φ
Other CEC-approved products from GoodWe Technologies Co Ltd available in Australia.
GW100KWH-D-10
100.8 kWh · LFP
GW102.4-BAT-AC-G10
100 kWh · LFP
GW112.6-BAT-AC-G10
110 kWh · LFP
GW5.1-BAT-D-G20
5 kWh · LFP
GW5.1-BAT-D-G21
5 kWh · LFP
GW6.0-BAT-D-G20
5.9 kWh · LFP
BMM-T3/108A(505W) (IEC 61215-2021)
505W
BMM-T3/108A(510W) (IEC 61215-2021)
510W
BMM-T3/108A(515W) (IEC 61215-2021)
515W
BMM-T3/120A(565W) (IEC 61215-2021)
565W
BMM-T3/120A(570W) (IEC 61215-2021)
570W
BMM-T3/120A(575W) (IEC 61215-2021)
575W
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.