Loading Solar Battery Perth...

Solar inverter · GoodWe · XS G3 series · CEC approved September 2024

GoodWe GW2000-XS-30

CEC listing: GW2000-XS-30 (AS4777-2 2020)

A 2 kW single-phase solar inverter.

Installed in Perth, typical: ~$600; Estimate for the inverter alone — your quote will vary
Rated power: 2kW; How much solar it can run at once
Battery-ready: No; Solar-only: adding a battery later means a second inverter

Datasheet (PDF)Compare inverters See the whole XS G3 series

What we can tell you

Read from the figures on this page. No review written yet.

It is a solar-only inverter: adding a battery later means a second inverter or an AC-coupled battery.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 2kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
MPPT trackers One string of panels, tuned as a whole: 1
Type Runs solar only: Solar
Warranty How long GoodWe Technologies Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the GoodWe GW2000-XS-30, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	97.6%
European efficiency	93.2%
DC input & MPPT
MPPT trackers	1
Physical
IP rating	IP66
Installation requirements
Top clearance	100 mm
Side clearance	100 mm
AC breaker	16 A
Cable gauge	4 mm²
Earthing method	TN-S
DNSP pre-approval	No
Estimated install time	4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Backup capable

CEC approval details

CEC approved

24 Sept 2024

Approval expiry

24 Sept 2027

Status

Active

Eligible for rebates

Yes

About GoodWe Technologies Co Ltd

Years in AU Market

12 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

168

What it costs in Perth

Typical installed, inverter only

$400–$800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 8.5 kWh
Annual yield: 3,103 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.goodwe.com.au

12 years in Australian market

How it compares

The GoodWe GW2000-XS-30 against the closest-power inverters from other brands.

Specification	GoodWe GW2000-XS-30GoodWe	Altenergy Power System DS3D-HAltenergy Power System	Altenergy Power System DS3D-HAltenergy Power System

Rated power?	2 kW	2 kW	2 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	1	Not verified	Not verified

Phases	Single-phase	Single-phase	Single-phase
Type	Solar	Solar	Solar
Battery ready	No	No	No
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

GoodWe GW2000-XS-30

GOODWE offers a 10-year warranty on inverters covering defects. Warranty voided by unauthorized installations. Claims can be made via your local distributor or [GOODWE support](https://goodwetechnology.zendesk.com/hc/en-gb).

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Unauthorized installation, alteration, tampering, or any defects post-warranty.
Environment limits: Exposed to seawater, aggressive atmospheres without written confirmation from GOODWE.

Read the official warranty document (PDF)

Fault & error codes — GoodWe GW2000-XS-30

From the install manual

12 documented

Showing 12 of 12. The official install manual is the authoritative source — always confirm before acting.

Cavity Over-temperaturecriticalCall your installer
Manual (PDF)
Internal temperature too high
Likely cause
Inverter is installed in a poorly ventilated area or high ambient temperature.
What to do
Improve ventilation and heat dissipation around the inverter.
DC Arc FaultcriticalCall your installer
Manual (PDF)
DC terminal not connected properly
Likely cause
The DC terminal is not firmly connected or the DC cable is broken.
What to do
Read the Quick Installation Guide and check cable connections.
Grid Overvoltagecritical
Manual (PDF)
Grid voltage exceeds permissible range
Likely cause
Utility grid may be abnormal temporarily or the grid voltage exceeds the permissible range.
What to do
1. If problem occurs frequently, check grid voltage is within permissible range. 2. Contact local power company if necessary.
Internal Comm LosscriticalCall your installer
Manual (PDF)
Internal communication error
Likely cause
Hardware CRC error or bus offline.
What to do
Reconnect AC output switch and DC input switch; contact dealer if the problem persists.
Anti Reverse power FailurewarningCall your installer
Manual (PDF)
Reverse power detected
Likely cause
Abnormal fluctuation of load.
What to do
Monitor load fluctuations, contact dealer if the issue continues.
Anti-islandingwarningCall your installer
Manual (PDF)
The utility grid is disconnected.
Likely cause
The government’s safety regulations kick in, disconnecting the grid.
What to do
Check if the utility grid is offline; contact dealer if issues persist.
Grid OverfrequencywarningCall your installer
Manual (PDF)
Grid frequency exceeds requirements.
Likely cause
Utility grid may be temporarily abnormal; or actual grid frequency exceeds the limits.
What to do
Contact the local power company if frequent occurrences.
Grid Rapid OvervoltagewarningCall your installer
Manual (PDF)
The grid voltage is abnormal or ultra-high.
Likely cause
The power grid voltage has been operating at a high voltage for a long time.
What to do
Contact local power company if the grid voltage exceeds permitted range.
Grid Under-frequencywarningCall your installer
Manual (PDF)
Grid frequency is lower than requirements.
Likely cause
Utility grid may be temporarily abnormal.
What to do
Contact local power company if the grid frequency is consistently low.
Grid UndervoltagewarningCall your installer
Manual (PDF)
Grid voltage is lower than the acceptable level
Likely cause
The grid voltage is lower than the permissible range.
What to do
1. Contact the local power company if the grid voltage is consistently low.
Utility Losswarning
Manual (PDF)
Grid power is lost
Likely cause
1. Utility grid power fails. 2. The AC cable is disconnected, or the AC breaker is off.
What to do
1. The alarm is automatically cleared after the grid power supply is restored. 2. Check whether the AC cable is connected and the AC breaker is on.
Grid Frequency Instabilityinfo
Manual (PDF)
Grid frequency changed too rapidly
Likely cause
Utility grid exception or incorrect monitoring.
What to do
1. Monitor the stability of the grid frequency with local power company.

Part of the GoodWe XS G3 series

Compare every GoodWe XS G3 variant side by side →

More GoodWe Technologies Co Ltd Inverters

GEH10-1U-10 (AS4777-2 2020)

10 kW · 1φ

GEH15-3U-10 (AS4777-2 2020)

15 kW · 1φ

GEH20-3U-10 (AS4777-2 2020)

20 kW · 1φ

GEH25-3U-10 (AS4777-2 2020)

25 kW · 1φ

GEH29.9-3U-10 (AS4777-2 2020)

29.9 kW · 1φ

GEH5.0-1U-10 (AS4777-2 2020)

5 kW · 1φ

View all GoodWe Technologies Co Ltd inverters

More from GoodWe Technologies Co Ltd

Other CEC-approved products from GoodWe Technologies Co Ltd available in Australia.

GoodWe Technologies Co Ltd Batteries

GW100KWH-D-10

100.8 kWh · LFP

GW102.4-BAT-AC-G10

100 kWh · LFP

GW112.6-BAT-AC-G10

110 kWh · LFP

GW5.1-BAT-D-G20

5 kWh · LFP

GW5.1-BAT-D-G21

5 kWh · LFP

GW6.0-BAT-D-G20

5.9 kWh · LFP

View all GoodWe Technologies Co Ltd batteries

GoodWe Technologies Co Ltd Solar Panels

BMM-T3/108A(505W) (IEC 61215-2021)

505W

BMM-T3/108A(510W) (IEC 61215-2021)

510W

BMM-T3/108A(515W) (IEC 61215-2021)

515W

BMM-T3/120A(565W) (IEC 61215-2021)

565W

BMM-T3/120A(570W) (IEC 61215-2021)

570W

BMM-T3/120A(575W) (IEC 61215-2021)

575W

View all GoodWe Technologies Co Ltd panels

View full GoodWe Technologies Co Ltd manufacturer profile

Want to take the next step?

Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Solar inverter · GoodWe · XS G3 series · CEC approved September 2024

GoodWe GW2000-XS-30

CEC listing: GW2000-XS-30 (AS4777-2 2020)

A 2 kW single-phase solar inverter.

Installed in Perth, typical: ~$600; Estimate for the inverter alone — your quote will vary
Rated power: 2kW; How much solar it can run at once
Battery-ready: No; Solar-only: adding a battery later means a second inverter

Datasheet (PDF)Compare inverters See the whole XS G3 series

Spotted something outdated?

What we can tell you

Read from the figures on this page. No review written yet.

It is a solar-only inverter: adding a battery later means a second inverter or an AC-coupled battery.
It runs on a standard single-phase supply.
We can't confirm it is on Synergy's approved list — a battery paired with it needs that for the WA Battery Scheme, so ask your installer.
It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power How much solar it can turn into usable power at once: 2kW
Max efficiency How much of the solar you make reaches the house: 97.6%
Phases Runs on a standard single-phase supply: Single
MPPT trackers One string of panels, tuned as a whole: 1
Type Runs solar only: Solar
Warranty How long GoodWe Technologies Co Ltd stands behind it: 10yr

Full datasheet

Every figure on file for the GoodWe GW2000-XS-30, by section.

Full datasheet, by section
Specification	Value
Efficiency
Max efficiency	97.6%
European efficiency	93.2%
DC input & MPPT
MPPT trackers	1
Physical
IP rating	IP66
Installation requirements
Top clearance	100 mm
Side clearance	100 mm
AC breaker	16 A
Cable gauge	4 mm²
Earthing method	TN-S
DNSP pre-approval	No
Estimated install time	4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features & compatibility

Battery compatible

Backup capable

CEC approval details

CEC approved

24 Sept 2024

Approval expiry

24 Sept 2027

Status

Active

Eligible for rebates

Yes

About GoodWe Technologies Co Ltd

Years in AU Market

12 years

Australian Office

Yes

CEC-Approved Batteries

CEC-Approved Panels

168

What it costs in Perth

Typical installed, inverter only

$400–$800

Estimate confidence: Medium

Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.

Explore your options

Compare quotes from installers you choose

WA compliance

Synergy approved list: Not confirmed
ESM compliant: Check

Perth performance

Estimate for a full-size array on this inverter

Daily yield: 8.5 kWh
Annual yield: 3,103 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.goodwe.com.au

12 years in Australian market

How it compares

The GoodWe GW2000-XS-30 against the closest-power inverters from other brands.

Specification	GoodWe GW2000-XS-30GoodWe	Altenergy Power System DS3D-HAltenergy Power System	Altenergy Power System DS3D-HAltenergy Power System

Rated power?	2 kW	2 kW	2 kW
Max efficiency?	97.6%best value	0.0%	0.0%
MPPT trackers?	1	Not verified	Not verified

Phases	Single-phase	Single-phase	Single-phase
Type	Solar	Solar	Solar
Battery ready	No	No	No
Warranty	10 years	Not verified	Not verified

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Documents

10-year inverter warranty

GoodWe GW2000-XS-30

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape: Full-replacement coverage
If you sell the home: Transfers to the next homeowner
What voids it: Unauthorized installation, alteration, tampering, or any defects post-warranty.
Environment limits: Exposed to seawater, aggressive atmospheres without written confirmation from GOODWE.

Read the official warranty document (PDF)

Fault & error codes — GoodWe GW2000-XS-30

From the install manual

12 documented

Showing 12 of 12. The official install manual is the authoritative source — always confirm before acting.

Cavity Over-temperaturecriticalCall your installer
Manual (PDF)
Internal temperature too high
Likely cause
Inverter is installed in a poorly ventilated area or high ambient temperature.
What to do
Improve ventilation and heat dissipation around the inverter.
DC Arc FaultcriticalCall your installer
Manual (PDF)
DC terminal not connected properly
Likely cause
The DC terminal is not firmly connected or the DC cable is broken.
What to do
Read the Quick Installation Guide and check cable connections.
Grid Overvoltagecritical
Manual (PDF)
Grid voltage exceeds permissible range
Likely cause
Utility grid may be abnormal temporarily or the grid voltage exceeds the permissible range.
What to do
1. If problem occurs frequently, check grid voltage is within permissible range. 2. Contact local power company if necessary.
Internal Comm LosscriticalCall your installer
Manual (PDF)
Internal communication error
Likely cause
Hardware CRC error or bus offline.
What to do
Reconnect AC output switch and DC input switch; contact dealer if the problem persists.
Anti Reverse power FailurewarningCall your installer
Manual (PDF)
Reverse power detected
Likely cause
Abnormal fluctuation of load.
What to do
Monitor load fluctuations, contact dealer if the issue continues.
Anti-islandingwarningCall your installer
Manual (PDF)
The utility grid is disconnected.
Likely cause
The government’s safety regulations kick in, disconnecting the grid.
What to do
Check if the utility grid is offline; contact dealer if issues persist.
Grid OverfrequencywarningCall your installer
Manual (PDF)
Grid frequency exceeds requirements.
Likely cause
Utility grid may be temporarily abnormal; or actual grid frequency exceeds the limits.
What to do
Contact the local power company if frequent occurrences.
Grid Rapid OvervoltagewarningCall your installer
Manual (PDF)
The grid voltage is abnormal or ultra-high.
Likely cause
The power grid voltage has been operating at a high voltage for a long time.
What to do
Contact local power company if the grid voltage exceeds permitted range.
Grid Under-frequencywarningCall your installer
Manual (PDF)
Grid frequency is lower than requirements.
Likely cause
Utility grid may be temporarily abnormal.
What to do
Contact local power company if the grid frequency is consistently low.
Grid UndervoltagewarningCall your installer
Manual (PDF)
Grid voltage is lower than the acceptable level
Likely cause
The grid voltage is lower than the permissible range.
What to do
1. Contact the local power company if the grid voltage is consistently low.
Utility Losswarning
Manual (PDF)
Grid power is lost
Likely cause
1. Utility grid power fails. 2. The AC cable is disconnected, or the AC breaker is off.
What to do
1. The alarm is automatically cleared after the grid power supply is restored. 2. Check whether the AC cable is connected and the AC breaker is on.
Grid Frequency Instabilityinfo
Manual (PDF)
Grid frequency changed too rapidly
Likely cause
Utility grid exception or incorrect monitoring.
What to do
1. Monitor the stability of the grid frequency with local power company.

Part of the GoodWe XS G3 series

Compare every GoodWe XS G3 variant side by side →

More GoodWe Technologies Co Ltd Inverters

GEH10-1U-10 (AS4777-2 2020)

10 kW · 1φ

GEH15-3U-10 (AS4777-2 2020)

15 kW · 1φ

GEH20-3U-10 (AS4777-2 2020)

20 kW · 1φ

GEH25-3U-10 (AS4777-2 2020)

25 kW · 1φ

GEH29.9-3U-10 (AS4777-2 2020)

29.9 kW · 1φ

GEH5.0-1U-10 (AS4777-2 2020)

5 kW · 1φ

View all GoodWe Technologies Co Ltd inverters