Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Inverters
  3. GoodWe
  4. GW1000-XS-30

Solar inverter · GoodWe · CEC approved September 2024

GoodWe GW1000-XS-30

CEC listing: GW1000-XS-30 (AS4777-2 2020)

A 1 kW single-phase solar inverter.

Rated power
1kWHow much solar it can run at once
Battery-ready
NoSolar-only: a battery later means a hybrid swap or a second inverter
Datasheet (PDF)

Get this inverter quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

GW1000-XS-30: the short answer

Feed-in credits (DEBS)DEBS pays for exports only when the inverter is 5 kW or less
YesDEBS pays for exports only when the inverter is 5 kW or less

What we can tell you

Read from the figures on this page. No review written yet.

  • It is a solar-only inverter: adding a battery later means replacing it with a hybrid inverter, or keeping it and adding an AC-coupled battery, which in WA counts as an alteration with whole-of-site compliance.
  • It runs on a standard single-phase supply.
  • It is CEC-approved, which a new install needs to qualify for STCs.

Key specs, in plain terms

The numbers that matter for a home. The full datasheet is below.

Rated power
1kW
How much solar it can turn into usable power at once
Max efficiency
97.6%
How much of the solar you make reaches the house
Phases
Single
Runs on a standard single-phase supply
MPPT trackers
1
One string of panels, tuned as a whole
Type
Solar
Runs solar only
Warranty
10yr
How long GoodWe Technologies Co Ltd stands behind it

Full datasheet

Every figure on file for the GoodWe GW1000-XS-30, by section.

Full datasheet, by section
SpecificationValue
Efficiency
Max efficiency97.6%
European efficiency93.2%
DC input & MPPT
MPPT trackers1
Physical
IP ratingIP66
Installation requirements
Top clearance100 mm
Side clearance100 mm
AC breaker16 A
Cable gauge4 mm²
Earthing methodTN-S
DNSP pre-approvalNo
Estimated install time4 hrs

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Features and CEC approval

Battery compatible
No
Backup capable
No
CEC approved
24 Sept 2024
Approval expiry
24 Sept 2027
Status
Active
Listed for STCs
Yes

About GoodWe

Years on the CEC list
12 years
Australian office
Yes
Category
Mid-Tier
CEC-approved inverters
229
CEC-approved batteries
30
CEC-approved panels
168
View full profile →
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Compare with other inverters→
  • Already have a quote? Check it→
  • GoodWe Technologies Co Ltd batteries and panels→

WA compliance

ESM compliant
Check

Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.

Perth performance

Estimate for a full-size array on this inverter

Daily yield
4.3 kWh
Annual yield
1,551 kWh

At 5 peak sun hours a day (BOM) with a 15% system derate.

Australian office

Has local presence

Website

www.goodwe.com.au
12 years on the CEC list

How it compares

The GoodWe GW1000-XS-30 against the closest-power inverters from other brands.

Specification
GoodWe GW1000-XS-30GoodWe
Solis S5-GR1P1K-MSolis
Solis Solis-mini-1000-4GSolis
Rated power?1 kW1 kW1 kW
Max efficiency?97.6%Not on fileNot on file
MPPT trackers?1Not on fileNot on file
PhasesSingle-phaseSingle-phaseSingle-phase
TypeSolarSolarSolar
Battery readyNoNoNo
Warranty10 yearsNot on fileNot on file

Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.

Documents

  • DatasheetPDF, opens in a new tab
  • Warranty termsPDF, opens in a new tab
  • Installation guide and user manualPDF, opens in a new tab
  • Compliance certificatePDF, opens in a new tab

10-year inverter warranty

GoodWe GW1000-XS-30

GOODWE offers a 10-year warranty on inverters covering defects. Warranty voided by unauthorized installations. Claims can be made via your local distributor or [GOODWE support](https://goodwetechnology.zendesk.com/hc/en-gb).

AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.

Coverage shape
Full-replacement coverage
If you sell the home
Transfers to the next homeowner
What voids it
Unauthorized installation, alteration, tampering, or any defects post-warranty.
Environment limits
Exposed to seawater, aggressive atmospheres without written confirmation from GOODWE.
Read the official warranty document (PDF)

Fault & error codes — GoodWe GW1000-XS-30

From the install manual

12 documented

Showing 12 of 12. The official install manual is the authoritative source — always confirm before acting.

  • Cavity Over-temperaturecriticalCall your installer
    Manual (PDF)

    Internal temperature too high

    Likely cause
    Inverter is installed in a poorly ventilated area or high ambient temperature.
    What to do
    Improve ventilation and heat dissipation around the inverter.
  • DC Arc FaultcriticalCall your installer
    Manual (PDF)

    DC terminal not connected properly

    Likely cause
    The DC terminal is not firmly connected or the DC cable is broken.
    What to do
    Read the Quick Installation Guide and check cable connections.
  • Grid Overvoltagecritical
    Manual (PDF)

    Grid voltage exceeds permissible range

    Likely cause
    Utility grid may be abnormal temporarily or the grid voltage exceeds the permissible range.
    What to do
    1. If problem occurs frequently, check grid voltage is within permissible range. 2. Contact local power company if necessary.
  • Internal Comm LosscriticalCall your installer
    Manual (PDF)

    Internal communication error

    Likely cause
    Hardware CRC error or bus offline.
    What to do
    Reconnect AC output switch and DC input switch; contact dealer if the problem persists.
  • Anti Reverse power FailurewarningCall your installer
    Manual (PDF)

    Reverse power detected

    Likely cause
    Abnormal fluctuation of load.
    What to do
    Monitor load fluctuations, contact dealer if the issue continues.
  • Anti-islandingwarningCall your installer
    Manual (PDF)

    The utility grid is disconnected.

    Likely cause
    The government’s safety regulations kick in, disconnecting the grid.
    What to do
    Check if the utility grid is offline; contact dealer if issues persist.
  • Grid OverfrequencywarningCall your installer
    Manual (PDF)

    Grid frequency exceeds requirements.

    Likely cause
    Utility grid may be temporarily abnormal; or actual grid frequency exceeds the limits.
    What to do
    Contact the local power company if frequent occurrences.
  • Grid Rapid OvervoltagewarningCall your installer
    Manual (PDF)

    The grid voltage is abnormal or ultra-high.

    Likely cause
    The power grid voltage has been operating at a high voltage for a long time.
    What to do
    Contact local power company if the grid voltage exceeds permitted range.
  • Grid Under-frequencywarningCall your installer
    Manual (PDF)

    Grid frequency is lower than requirements.

    Likely cause
    Utility grid may be temporarily abnormal.
    What to do
    Contact local power company if the grid frequency is consistently low.
  • Grid UndervoltagewarningCall your installer
    Manual (PDF)

    Grid voltage is lower than the acceptable level

    Likely cause
    The grid voltage is lower than the permissible range.
    What to do
    1. Contact the local power company if the grid voltage is consistently low.
  • Utility Losswarning
    Manual (PDF)

    Grid power is lost

    Likely cause
    1. Utility grid power fails. 2. The AC cable is disconnected, or the AC breaker is off.
    What to do
    1. The alarm is automatically cleared after the grid power supply is restored. 2. Check whether the AC cable is connected and the AC breaker is on.
  • Grid Frequency Instabilityinfo
    Manual (PDF)

    Grid frequency changed too rapidly

    Likely cause
    Utility grid exception or incorrect monitoring.
    What to do
    1. Monitor the stability of the grid frequency with local power company.

More GoodWe Technologies Co Ltd inverters

GW1000-XS-11 (AS4777-2 2020)

1 kW · 1φ

GW1000-XS (AS4777-2 2020)

1 kW · 1φ

GW1000-XS (AS4777-2 2020)

1 kW · 1φ

GW700-XS-11 (AS4777-2 2020)

0.7 kW · 1φ

GW700-XS-30 (AS4777-2 2020)

0.7 kW · 1φ

GW700-XS (AS4777-2 2020)

0.7 kW · 1φ

View all GoodWe Technologies Co Ltd inverters

More from GoodWe

Other CEC-approved products from GoodWe available in Australia.

GoodWe Batteries

GW100KWH-D-10

100.8 kWh · LFP

GW102.4-BAT-AC-G10

100 kWh · LFP

GW112.6-BAT-AC-G10

110 kWh · LFP

GW5.1-BAT-D-G20

5 kWh · LFP

GW5.1-BAT-D-G21

5 kWh · LFP

GW6.0-BAT-D-G20

5.9 kWh · LFP

View all GoodWe batteries

GoodWe Solar Panels

BMM-T3/108A(505W)

505W

BMM-T3/108A(510W)

510W

BMM-T3/108A(515W)

515W

BMM-T3/120A(565W)

565W

BMM-T3/120A(570W)

570W

BMM-T3/120A(575W)

575W

View all GoodWe panels
View full GoodWe manufacturer profile

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

Or explore your battery options first →

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

About this data

All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.

Explore your optionsCompare inverters
Spotted something outdated?