Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Fronius · Primo GEN24 series · CEC approved July 2026
CEC listing: Primo GEN24 4.6 SC (AS4777-2 2020)
A 4.6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Warranty
How long Fronius Australia Pty Ltd stands behind it
Every figure on file for the Fronius Primo GEN24 4.6 SC, by section.
| Specification | Value |
|---|---|
| Physical | |
| IP rating | IP66 |
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 200 mm |
| AC breaker | 60 A |
| Cable gauge | 10 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | Yes |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
30 July 2026
Approval expiry
30 July 2029
Status
Active
Eligible for rebates
Yes
Years in AU Market
17 years
Australian Office
Yes
CEC-Approved Batteries
10
CEC-Approved Panels
0
Category
Premium
Typical installed, inverter only
$1,610–$2,760
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
Australian office
Has local presence
Website
www.fronius.com/en-auThe Fronius Primo GEN24 4.6 SC against the closest-power inverters from other brands.
| Specification | Fronius Primo GEN24 4.6 SCFronius | Energizer FORCE 4.6HSEnergizer | Energizer Force 4.6SEnergizer |
|---|---|---|---|
| Rated power? | 4.6 kW | 4.6 kW | 4.6 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Hybrid | Hybrid | Solar |
| Battery ready | Yes | Yes | No |
| Warranty | 5 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers defects in material and workmanship for 5 years. Normal wear and tear is not covered. To claim, notify your installer or Fronius directly with proof of purchase.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Fronius Primo GEN24 series
Compare every Fronius Primo GEN24 variant side by side →
Eco 25.0-3-S (AS4777-2 2020)
25 kW · 3φ
Eco 27.0-3-S (AS4777-2 2020)
27 kW · 3φ
Primo 3.0-1 (AS4777-2 2020)
3 kW · 1φ
Primo 3.5-1 (AS4777-2 2020)
3.5 kW · 1φ
Primo 3.6-1 (AS4777-2 2020)
3.68 kW · 1φ
Primo 4.0-1 (AS4777-2 2020)
4 kW · 1φ
Other CEC-approved products from Fronius Australia Pty Ltd available in Australia.
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.