Loading Solar Battery Perth...
Loading Solar Battery Perth...
Hybrid inverter · Clenergy Technology · TNK series · CEC approved June 2024
CEC listing: TNK-6000-PV-E1 (AS4777-2 2020)
A 6 kW single-phase hybrid inverter that is battery-ready.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar and a battery from one unit
Warranty
How long Clenergy Technology Co Ltd stands behind it
Every figure on file for the Clenergy Technology TNK-6000-PV-E1, by section.
| Specification | Value |
|---|---|
| Physical | |
| Operating temperature | 30°C to 90°C |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
5 June 2024
Approval expiry
5 June 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
2 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Unknown
Typical installed, inverter only
$2,100–$3,600
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Clenergy Technology TNK-6000-PV-E1 against the closest-power inverters from other brands.
| Specification | Clenergy Technology TNK-6000-PV-E1Clenergy Technology | Energizer FORCE 6.0HSEnergizer | Energizer Force 6.0HT+Energizer |
|---|---|---|---|
| Rated power? | 6 kW | 6 kW | 6 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Three-phase |
| Type | Hybrid | Hybrid | Hybrid |
| Battery ready | Yes | Yes | Yes |
| Warranty | 2 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
Clenergy warrants their solar products to be free of defects in material and workmanship for twelve years, but it does not cover damage from improper installation or acts of God. To make a claim, a customer must report a defect in writing.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Clenergy Technology TNK series
Compare every Clenergy Technology TNK variant side by side →
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.