Loading Solar Battery Perth...
Loading Solar Battery Perth...
Battery inverter · Beijing Hyperstrong Technology · HyperCubeC&I II series · CEC approved April 2026
CEC listing: HSL2C2912-0232-AU (AS4777-2 2020)
A 115 kW three-phase battery inverter.
Commercial-scale inverter
At 115 kW, this is built for businesses and large sites. A typical home inverter is 5–10 kW.
Browse home-size inverters →Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Needs a three-phase supply — check your switchboard
Type
Runs a battery; pairs with a separate solar inverter
Warranty
How long Beijing HyperStrong Technology Co LTD stands behind it
Every figure on file for the Beijing Hyperstrong Technology HSL2C2912-0232-AU, by section.
| Specification | Value |
|---|---|
| Installation requirements | |
| Top clearance | 200 mm |
| Side clearance | 300 mm |
| AC breaker | 20 A |
| Cable gauge | 10 mm² |
| Earthing method | PE |
| DNSP pre-approval | No |
| Estimated install time | 8 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
Yes
Backup capable
Yes
CEC approved
13 Apr 2026
Approval expiry
13 Apr 2029
Status
Active
Eligible for rebates
Yes
Years in AU Market
—
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Unknown
Typical installed, inverter only
$34,500–$63,250
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
The Beijing Hyperstrong Technology HSL2C2912-0232-AU against the closest-power inverters from other brands.
| Specification | Beijing Hyperstrong Technology HSL2C2912-0232-AUBeijing Hyperstrong Technology | Shenzhen Hnergy HNESPS115-34M0Shenzhen Hnergy | Shenzhen Hnergy HNESPS115-34M0QShenzhen Hnergy |
|---|---|---|---|
| Rated power? | 115 kW | 115 kW | 115 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Three-phase | Three-phase | Three-phase |
| Type | Battery | Battery | Battery |
| Battery ready | Yes | Yes | Yes |
| Warranty | 12 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
This warranty covers your solar product for 12 years. It excludes damage from improper installation or environmental extremes. Claims can be made by contacting support.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Beijing Hyperstrong Technology HyperCubeC&I II series
Compare every Beijing Hyperstrong Technology HyperCubeC&I II variant side by side →
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.