Solar inverter · Altenergy Power System · CEC approved June 2025
CEC listing: ELT-10 (AS4777-2 2020)
A 10 kW three-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Not on file: we don’t have this figure from the manufacturer’s documents yet, so we leave it blank rather than print a typical value. Ask your installer to confirm it on the quote. Seen it in a document? Tell us
Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead. Ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Altenergy Power System ELT-10 against the closest-power inverters from other brands.
| Specification | Altenergy Power System ELT-10Altenergy Power System | Energizer Force 10.0HS+Energizer | Energizer Force 10.0HT+Energizer |
|---|---|---|---|
| Rated power? | 10 kW | 10 kW | 10 kW |
| Max efficiency? | Not on file | Not on file | Not on file |
| MPPT trackers? | Not on file | Not on file | Not on file |
| Phases | Three-phase | Single-phase | Three-phase |
| Type | Solar | Hybrid | Hybrid |
| Battery ready | No | Yes | Yes |
| Warranty | 25 years | Not on file | Not on file |
Specs from the CEC register and datasheet enrichment. Indicative: confirm exact figures with your installer.
The APsystems warranty covers defects in materials and workmanship for up to 25 years, providing options for repair, replacement, or refund. Key exclusions include improper installation, use of unauthorized components, or environmental damages.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
ELT-8 (AS4777-2 2020)
8 kW · 3φ
ELT-12 (AS4777-2 2020)
12 kW · 3φ
ELT-6 (AS4777-2 2020)
6 kW · 3φ
QT2 (AS4777-2 2020)
2 kW · 3φ
QT2-AU (AS4777-2 2020)
2 kW · 3φ
ELS-9.6 (AS4777-2 2020)
9.6 kW · 1φ
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.