Loading Solar Battery Perth...
Loading Solar Battery Perth...
Solar inverter · Altenergy Power System · DS3D Microinverter series · CEC approved November 2025
CEC listing: DS3D-L-AU (AS4777-2 2020)
A 1.6 kW single-phase solar inverter.
Read from the figures on this page. No review written yet.
The numbers that matter for a home. The full datasheet is below.
Rated power
How much solar it can turn into usable power at once
Phases
Runs on a standard single-phase supply
Type
Runs solar only
Warranty
How long Altenergy Power System Inc stands behind it
Every figure on file for the Altenergy Power System DS3D-L-AU, by section.
| Specification | Value |
|---|---|
| Physical | |
| Weight | 4.3 kg |
| IP rating | IP67 |
| Installation requirements | |
| Top clearance | 25 mm |
| Side clearance | 15 mm |
| AC breaker | 20 A |
| Cable gauge | 2.5 mm² |
| Earthing method | TN-S |
| DNSP pre-approval | No |
| Estimated install time | 4 hrs |
Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.
Battery compatible
No
Backup capable
No
CEC approved
24 Nov 2025
Approval expiry
25 Nov 2027
Status
Active
Eligible for rebates
Yes
Years in AU Market
1 years
Australian Office
Not verified
CEC-Approved Batteries
0
CEC-Approved Panels
0
Category
Budget
Typical installed, inverter only
$320–$640
Prices vary by installer, configuration and site complexity. Get exact quotes from installers you choose.
Compare quotes from installers you choose
Western Power approval is required for every grid-connected install. Under Emergency Solar Management, a new system must be remotely manageable, or take an export limit instead — ask your installer to confirm this inverter’s ESM status.
Estimate for a full-size array on this inverter
At 5 peak sun hours a day (BOM) with a 15% system derate.
The Altenergy Power System DS3D-L-AU against the closest-power inverters from other brands.
| Specification | Altenergy Power System DS3D-L-AUAltenergy Power System | Altenergy Power System DS3D-LAltenergy Power System | Altenergy Power System DS3D-LAltenergy Power System |
|---|---|---|---|
| Rated power? | 1.6 kW | 1.6 kW | 1.6 kW |
| Max efficiency? | 0.0% | 0.0% | 0.0% |
| MPPT trackers? | Not verified | Not verified | Not verified |
| Phases | Single-phase | Single-phase | Single-phase |
| Type | Solar | Solar | Solar |
| Battery ready | No | No | No |
| Warranty | 25 years | Not verified | Not verified |
Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.
APsystems covers defects in materials and workmanship for 25 years. Not covered if improperly installed or used. Claims must follow the RMA process.
AI-summarised from the manufacturer warranty document. Always confirm against the linked PDF before relying on it for a claim.
Part of the Altenergy Power System DS3D Microinverter series
Compare every Altenergy Power System DS3D Microinverter variant side by side →
DS3 (AS4777-2 2020)
0.88 kW · 1φ
DS3-H (AS4777-2 2020)
0.96 kW · 1φ
DS3-L (AS4777-2 2020)
0.75 kW · 1φ
DS3-S (AS4777-2 2020)
0.625 kW · 1φ
DS3D (AS4777-2 2020)
1.8 kW · 1φ
DS3D (AS4777-2 2020)
1.8 kW · 1φ
Get a quote from an installer from our network that covers your area. You choose whether to act on it. No obligation.
About this data
All inverter specifications are sourced from the CEC Approved Products Register. Specifications are provided as published by the CEC and may differ from manufacturer datasheets. Verify current specifications with the manufacturer or your installer before purchasing. Not all listed models may be currently available in Western Australia.