Perth summers are hot, and a panel on a roof runs well above the air temperature. Every panel loses some output as it heats up. The temperature coefficient on its datasheet tells you how much.
Every solar panel has a temperature coefficient (Pmax): the percentage of output it loses for each degree its cells run above 25°C, the temperature it is rated at. The closer the figure is to zero, the less output the panel gives up in heat.
A worked example: with the cells at 65°C, a panel rated at -0.35%/°C gives up about 14% of its rated output, and one rated at -0.25%/°C about 10%. How that adds up over a year depends on your roof, its angle and how hot the cells actually run.
Listed A to Z by name. The coefficient differs from model to model within a line, so read it on the datasheet for the exact panel you are quoted, or on its listing in our panel index.
| Panel line | Technology |
|---|---|
| Aiko ABC | ABC |
| Canadian Solar HiKu7 | TOPCon |
| Huasun Himalaya | HJT |
| Jinko Tiger Neo | TOPCon |
| LONGi Hi-MO X | HPBC |
| REC Alpha Pure-R | HJT |
| Risen Hyper-ion | HJT |
| Trina Vertex S+ | TOPCon |
HJT (heterojunction)
Combines crystalline silicon with thin-film layers on each face of the cell.
Back contact (IBC, ABC, HPBC)
All the electrical contacts sit on the back of the cell, so the front surface takes in more light.
TOPCon
An N-type cell design (tunnel oxide passivated contact).
PERC
The older mainstream P-type cell design.
Whatever the technology, compare the coefficient, the warranty and the rated output of the exact panels on each quote.
Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.
You can also compare panels side by side or browse every CEC-approved panel.