Trina Solar · manufacturer profile

Trina Solar

Trina Solar panel review: Vertex S+ and Vertex S+ G3

Solar panel manufacturer

On the CEC list
15yrsSince 2011
Current CEC listings
182Panels
Australian office
Macquarie Park, NSWLocal presence confirmed
Safety notices
0None on our record

Specifications and pricing change. Confirm them with the manufacturer.

In short

Trina Solar suits a Perth house roof in full sun, where a panel is chosen by how much output it gives up as it heats: 0.29% a degree on the Vertex S+ and 0.26% on the newer Vertex S+ G3, so the G3 pulls ahead on the hottest afternoons. It is a panel-only decision, since Trina sells no battery or inverter in Australia. On WA: approved for installation in Australia, with WA availability to be confirmed, and within 2 km of the shoreline the warranty starts only once Trina has approved the site. The catch is that the 25-year product term holds only for panels bought through an authorised Australian reseller, installed in Australia and delivered after a date set per model, and that you pay the labour to swap a faulty panel.

A good fit if

  • Your roof is a house roof in full Perth sun, more than 2 km from the coast, and you want a panel between 425 W and 525 W
  • You want Trina's 25-year product cover and can meet its conditions: an authorised Australian reseller, an install in Australia and a delivery date after the model's cut-off
  • You want an all-black panel, which the NEG9RC.27 and the NEG9RP.25Z both are

Might not suit you if

  • Your home sits within 2 km of the shoreline, where the warranty starts only after Trina Solar has assessed and approved the site
  • You want the maker to cover the labour on a warranty swap, since Trina Solar pays for the panel and its transport and not for the work on the roof

Worth knowing. The 25-year product warranty holds only for panels from an authorised Australian reseller, installed in Australia and delivered after a date set for each model. Miss the date and the panel falls back to Trina's global warranty, whose product term is shorter; buy outside the authorised reseller network and there is no Trina warranty at all.

Solar Battery Perth is independent. We're not owned by an energy retailer or a manufacturer. It is the WA solar and battery library: real product and install information, honest comparisons, and a matcher that sizes to the home, not to a sales target. Installers quote the actual price.

The full review

7 sections

Who is Trina Solar?

Trina Solar is based in Changzhou in China. It says it was founded in 1997 and is listed on Shanghai's STAR Market. Its Australian company, Trina Solar (Australia) Pty Ltd, has been a registered Australian business since February 2011 and works from Macquarie Park in Sydney. The warranty names that office as the claims centre for Australia and New Zealand.

The company that must honour the warranty is the Chinese parent, so the Sydney office handles a claim while the obligation sits in China. A claim is lodged on Trina's online customer service portal, and the Sydney centre is the regional office the warranty names behind it for Australia and New Zealand.

What does Trina Solar sell in Australia?

Panels only. Trina sells two panel ranges in Australia, the Vertex S+ and the newer Vertex S+ G3 (the G3 below). The Vertex S+ runs from 425 W to 525 W and the G3 from 460 W to 515 W. Both use N-type i-TOPCon cells, Trina's current cell design, so a buyer chooses on size, efficiency, heat loss and finish.

The Vertex S+ comes as a 1.76 m panel of about 21 kg (the NEG9R.28, NEG9RC.27, NEG9R.25 and NEG9RH.28) or a 1.96 m panel of 23.5 kg (the NEG18R.28, NEG18R.25 and NEG18RC.27). The longer panel carries more watts, so fewer of them make up a system, and the shorter one weighs about 2.5 kg less for the installer carrying it up the ladder. The NEG9RC.27 and the NEG18RC.27 are bifacial, meaning the back makes power too, which only helps where light can reach the back of the panel.

The G3's NEG10R.28Z is a 1.84 m panel from 495 W to 515 W, and its NEG9RP.25Z is a 1.76 m all-black panel from 460 W to 480 W. Both reach an efficiency (the share of sunlight on the panel that becomes power) of 24.0% or more, while the Vertex S+ models top out between 22.5% and 23.8%, so the same roof space yields more power with a G3.

Every Vertex S+ model loses 0.29% of its rated output for each degree the cell runs above the temperature it was rated at, and both G3 models lose 0.26%. The gap is small per panel and per degree, but it runs the same way across the whole array on every hot afternoon, which is the reason to look at the G3 for a north-facing tin roof.

Is it approved to install in Australia?

Yes, by exact model. Every current model family has panels on the Clean Energy Council's approved list, approved between 25 January 2024 and 2 September 2026 and listed until at least January 2027. The G3 families are listed to 2029. Not every wattage is on the list, which names each panel by code, so check the exact code on the quote.

Solar Battery Perth checked the families against the council's register data dated 14 October 2026 and its de-listing and suspension lists on 16 October 2026. None of the current models has been de-listed or suspended by the council. Trina's one entry on the de-listing list is from September 2020, when four 310 W panels were removed over certification issues. The listing matters for the federal solar discount, which is claimed only on panels the council lists.

How long is the warranty, and what does it cover?

The product warranty runs 25 years, and the output warranty (how much power the panel still makes) runs 30. The 25-year term comes from an Australian supplement and needs an authorised Australian reseller, an install in Australia and a delivery date after its cut-off. At year 30 output is promised at 87.4% (Vertex S+) and 88.85% (G3).

Within 2 km of the shoreline or beside a salt lake, the warranty starts only after Trina has evaluated and approved the site, so for a home in Perth's coastal suburbs that approval belongs in writing before the panels go up. From 2 km to 5 km from the coast Trina recommends the panels without that approval step. Corrosion from an unusually harsh environment is excluded either way.

The supplement is an Australian addition to Trina's global warranty, and each model has its own cut-off in it. The NEG9R.28, NEG9RC.27 and NEG9R.25 are covered for panels delivered after 1 January 2024, the NEG18R.25 and NEG18RC.27 after 15 October 2024, the NEG9RH.28 after 1 September 2025, the NEG10R.28Z after 1 June 2026 and the NEG9RP.25Z after 1 July 2026. A panel delivered before its date or installed outside Australia falls back to the global warranty alone, whose product term is shorter. The authorised-reseller condition sits in the global warranty itself, so a panel bought outside that network has no Trina warranty at all, only your consumer guarantees. The NEG18R.28 has no supplement of its own, so its 25-year term comes from its datasheet alone. The NEG9RH.28 supplement names only the 450 W to 475 W panels, not the 440 W and 445 W ones. Ask Trina in writing to confirm the term before you buy either.

Behind the year-30 figures is a yearly limit: the Vertex S+ may lose no more than 1.0% of its output in the first year and 0.4% a year after that, and the G3 holds the yearly loss to 0.35%. Those figures are the June 2026 global warranty's, which covers panels delivered from 1 June 2026; a panel delivered earlier sits under the version current at its delivery date. On the NEG9RC.27 the back of the panel carries its own promise, no more than 15% of its starting power lost in the first ten years and no more than 30% by year 30. The NEG18RC.27 is not named in that backside clause, so ask Trina for its terms.

Glass breakage is covered when nothing outside the panel caused it. Scratches, stains, rust and discolouration are not defects under the warranty. The clock starts on the day the panels are delivered to the customer, or six months after they left the factory if that comes first. The warranty belongs to the first owner while the panels stay where they were installed, and it can pass whole to a new owner of the house who accepts Trina's terms in writing.

A claim goes to Trina's customer service portal within two months of noticing the fault, with the invoice, the serial numbers and photographs. Trina then chooses between repairing the panels, replacing them, supplying extra panels, or paying you a refund worked out from the output shortfall or the panels' remaining value. Trina pays for the repair and the transport to you, but taking the faulty panel down and fitting the replacement is your cost. Your Australian Consumer Law guarantees apply on top.

How safe is it?

Every model is rated to run between -40 °C and 70 °C, which covers a Perth roof in February. The cells sit between two sheets of glass and the wiring box is sealed to IP68, so water and dust stay out.

Every model is tested to a 5,400 Pa load on the front (a pascal is a unit of pressure), and the back figure is the one that counts when wind tries to lift the panel. On the back the 1.96 m panels are tested to 2,400 Pa, the NEG9RP.25Z to 3,600 Pa, and the other 1.76 m panels and the NEG10R.28Z to 4,000 Pa. On an exposed roof ask the installer to match the panel and its clamps to the site.

Where can I buy and install it in WA?

Approved for installation in Australia; WA availability to be confirmed. No Trina document we hold names a Perth distributor or a supply date. Buy through an authorised Australian reseller, since Trina's warranty does not apply at all without one. Trina's Sydney office can confirm whether a supplier is one if the installer cannot show it.

Ask the installer for the exact model code and the delivery date of the panels on the quote. Our panel library shows each Trina model's CEC listing. Installers listed with us can tell you whether they fit Trina panels. The price is whatever the installer quotes, so request quotes once the model is settled.

Where Trina Solar fits in WA

A Perth house roof that sits in direct summer sun is the place for Trina's panels. The G3 keeps a little more of its rating through a hot afternoon, since it loses 0.26% per degree against 0.29% on the Vertex S+. The shorter 1.76 m panel weighs about 2.5 kg less than the 1.96 m one, so the choice between them is roof space against carrying weight. Within 2 km of the shoreline the warranty starts only once Trina has approved the site.

The quote should name the exact model code, the delivery date and an authorised Australian reseller as the supplier, because all three decide whether the 25-year product warranty applies.

Everything Trina Solar has on the CEC register

Each product type at a glance. The full lists, grouped by series, are below.

Trina Solar full lists, by product type

Trust and support

What we have verified about Trina Solar in Australia, and what we haven't.

Australian office
Yes, local presence in Australia (Macquarie Park, NSW)
Confirmed
AU support
1300 874 627 · australiaservice@trinasolar.com
Listed
Local support
Yes, support handled through Australian channelsSource: maker's Australian site, checked 1 May 2026
Confirmed
Local warranty claims
Australian contact on record. Confirm the claim process with your installer
Listed
CEC listings
182 approved right now · 212 delisted · listed since 2011
Approved
Certifications
ISO 9001 · ISO 14001
Research-verified
Listed company
SSE:688599
Country of origin
CN
Documents

Market timeline

Trina Solar has been on the CEC list since 2011. It may have been in Australia earlier. Here is what has happened on the CEC register since then.

On the CEC list
15yrsSince 2011
Approved right now
182182 panels
Delisted
212Of 394 ever listed
Safety notices
0None on our record

Events on the register, by year

  • Approval or launch
  • Safety
  • Other

Each block is one register event. Tap a year to see its events in the list below.

Key moments

5 of 10 events
  1. 2011

    First CEC listing we can see

    Sourced from CEC Panel Approvals. Earliest CEC listing we can see. The brand may have been in Australia earlier.

    Approval
  2. 2021

    ☀️ First CEC-Approved Solar Panel

    Trina Solar entered Australian panel market with TSM-525DEG19C.20.

    Approval
  3. 2021

    First CEC Approval

    Received initial Clean Energy Council certification.

    Approval
  4. 2022

    ☀️ 50 Panel Models Listed

    Panel range expanded to 50 CEC-approved models.

    Approval
  5. 2022

    ☀️ 100 Panel Models Listed

    Panel range expanded to 100 CEC-approved models.

    Approval

Frequently asked questions

About Trina Solar

Where is Trina Solar based?

Trina Solar is headquartered in Changzhou, China and was founded in 1997. Its products are sold in Australia through SAA-accredited installers.

Is Trina Solar available in Perth and WA?

Yes. Trina Solar entered the Australian market in 2011, and its products are installed across Perth and Western Australia by SAA-accredited installers. Confirm local support and warranty handling with your installer before you buy.

Panels

What Trina Solar solar panels are on the CEC register?

Trina Solar has 182 CEC-approved panel models from 265-760 W.

Where next

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.