Sigenergy vs Sungrow: SigenStor against the SBR and SBH

Sigenergy and Sungrow both make modular battery systems sold in Perth, and they are built in different ways. Sigenergy's SigenStor is a DC tower that stacks its own inverter and battery modules. Sungrow's SBR and SBH ranges pair with Sungrow's own hybrid inverters. Here is how the two compare on the facts, for a WA home. Sigenergy's SigenStor line spans two CEC-approved hardware generations, with modules first approved June 2024 and a newer generation from Apr 2026. Both remain CEC-active and individually resolvable; see the generation breakdown for what changed.

Last updated: 3 November 2026

Quick answer

The choice mostly comes down to Sigenergy's all-in-one stack with three-phase and whole-home backup options, or Sungrow's modular SBR and SBH range and longer market track record. Sigenergy suits you if you want three-phase or whole-home backup options from an all-in-one stack. Sungrow suits you if you want a modular battery matched to a Sungrow hybrid and a longer market track record. Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply.

Sources: Synergy SSL register · WA Battery Scheme · Solar Battery Perth buyer-fit notes

Get Sigenergy or Sungrow quoted in Perth

Enter your postcode and get a free, no-obligation quote from a member installer who covers your area.

Sigenergy vs Sungrow at a glance

Sigenergy vs Sungrow at a glance
TopicSigenergySungrow
Tends to suitBuyers who prioritise power output, three-phase or whole-home backup, and an all-in-one stack.Buyers who want modular sizing and a matched Sungrow battery and inverter on the path to WA-rebate eligibility.
WA rebateSynergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply. The exact SigenStor configuration on the quote is the one that counts.Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply. The exact model on the quote is the one that counts.
How it's builtModular DC-coupled 'tower' (SigenStor) that integrates the hybrid inverter and stackable battery modules, with three-phase and backup options at higher configurations.Modular stackable storage (the SBR low-voltage and SBH high-voltage ranges) that pairs with a compatible Sungrow hybrid inverter, so battery and inverter are designed to work together.
OriginSigenergy makes the SigenStor inverter-and-battery tower, sold in Perth.Sungrow makes the SBR and SBH home battery ranges and the hybrid inverters they pair with, sold in Perth.
Australian supportHas an Australian office.Established Australian office and support presence.

Any spec table below takes each brand's models from the CEC register. The written comparison is our own summary. Specs, prices and eligibility change, so check the current details with your installer.

Does either battery work with the inverter you already have?

Yes if it is one of Sungrow's SH5.0RS to SH10RS, SH5.0RT to SH10RT or SH5T to SH25T hybrids. Those inverters take either of Sungrow's two battery towers (the SBR and SBH) with no new inverter on the wall. Older SH5K-20 and SH5K-30 units are low-voltage hybrids and cannot take either battery, so check the exact inverter model with the installer. Sigenergy's own Sigen Hybrid inverter takes only modules from the earlier of the two SigenStor generations, the 5.2 and 7.8 kWh sizes. A SigenStor brings its own inverter in the Sigen Energy Controller, which sits at the top of each stack and serves both the solar and the battery. A home with any other inverter needs a new one with either brand, alongside the battery. The WA battery price index has our installed-price ranges for 10 and 20 kWh, and the rebates.

How is each sized, and how big can it go?

Both grow by adding modules to a stack, in different sizes and up to different limits. A SigenStor stack holds one to six modules of 6.0 or 9.0 kWh usable (the energy you can actually draw), for up to 54 kWh. The SBR stacks two to eight 3.2 kWh modules for up to 25.6 kWh, and the larger SBH three to eight 5.0 kWh modules for up to 40 kWh. Those top sizes need a three-phase supply (power on three lines rather than one), and on a single-phase supply the SBR stops at 22.4 kWh and the SBH at 30 kWh.

Past one stack, Sigenergy's Gateway unit lets a home run more than one SigenStor side by side. Sungrow allows up to four matching SBR stacks on one hybrid, and up to four SBH units for as much as 160 kWh.

Which runs more of the house at once, including in a blackout?

On both brands the power comes from the smaller of two limits: what the inverter can supply and what the modules in the stack can deliver. The Sigen Energy Controller is rated up to 12 kW on single-phase and 30 kW on three-phase. Sungrow's largest single-phase hybrid is the SH10RS, which charges and discharges a battery at 10 kW. Its three-phase SH25T discharges at 25 kW.

A single 6.0 kWh Sigenergy module charges or discharges at only 3.0 kW and a single 9.0 kWh module at 4.6 kW, while the smallest SBR supplies 3.84 kW. When the home needs more than the stack can give, the rest comes from the panels by day and from the grid at night.

In a blackout both move the circuits the installer has wired for backup onto the battery. A SigenStor does it with no break in supply when Sigenergy's Gateway is fitted and the home draws less than the controller's rating. Sungrow's SH hybrids switch in under 10 milliseconds and supply up to 10 kW from the SH10RS or 25 kW from the SH25T.

How does the WA battery rebate apply to each?

Synergy's Supported Solutions List covers inverters approved for control. A battery system needs an inverter with a battery-storage (DER-Storage) listing on this list to be eligible for the WA Battery Scheme. A listing for generation only doesn't count. Other scheme conditions apply. On a SigenStor quote the inverter is the Sigen Energy Controller, and on a Sungrow quote it is the SH hybrid. The battery has to be on the Clean Energy Council's approved list. The household also has to join a virtual power plant (VPP), a program that can call on the battery during peak demand. On the September 2026 list Sungrow's three-phase SH5.0RT and SH10RT were listed only provisionally, so ask the installer whether either one counts for the rebate. How the WA battery rebate works covers the rest of the rules.

How do the two warranties differ?

Both run 10 years and promise at least 70% of capacity at the end, but they differ on what uses up that promise, who pays the labour on a fault and what happens when the system goes offline.

Sungrow sets no limit on how many times the battery fills and empties (its cycles) in daily self-consumption, which means storing your own solar for the evening, or in backup. Any other use is capped at 2.8 MWh for each kWh of capacity, about 7.7 years of one full cycle a day, and so is a mix that includes it. The terms do not say how VPP events count. Sigenergy caps each module at about 3,700 to 3,800 full cycles, which is more than one a day for 10 years.

Sigenergy's cover includes labour on site and basic travel. Sungrow sends replacement parts or a replacement battery and pays the installer a set amount toward the labour, but not travel or on-site costs.

A SigenStor that is offline for more than a year drops to 5 years of cover. Sungrow excludes a battery system that is not monitored in its iSolarCloud platform.

Your consumer guarantees under Australian Consumer Law apply automatically, and both warranties add to them.

Where should each battery sit in a Perth summer?

Somewhere that stays cool, such as a shaded garage rather than a wall in the afternoon sun, because both makers set temperature limits. Sigenergy's modules work from -20°C to 55°C, though its warranty recommends 10°C to 30°C. Sungrow's SBR and SBH charge in air up to 50°C.

For a Sungrow battery installed from 21 May 2026, the 70% capacity promise also expects fewer than 90 days a year between 35°C and 40°C, fewer than 30 days above 40°C, and an average below 25°C for the rest of the year. The installer can settle the site against those limits before the battery goes in.

How long has each brand been in Australia?

Sungrow has been here far longer, with its own Australian subsidiary since 2014 against Sigenergy's since August 2023. Sigenergy's first SigenStor reached the Clean Energy Council's approved list in June 2024. Sungrow itself dates from 1997 and has concentrated on solar inverters ever since, while Sigenergy was founded in May 2022.

Sources

Sigenergy vs Sungrow: how they compare

Sigenergy

SigenStor systems that combine inverter, battery and (optionally) EV charging in one stack.

Sungrow

Modular SBR and SBH battery ranges that pair with Sungrow's own hybrid inverters.

Strengths

Sigenergy

  • Whole-home and three-phase backup options at larger configurations
  • Modular stack: scale capacity and discharge by adding modules
  • Integrated inverter and battery, with optional EV charging, in one system

Sungrow

  • Modular sizing: build to the capacity you need and expand later
  • Designed to pair with Sungrow's own hybrid inverters

Things to weigh

Sigenergy

  • Newer to the market than the longest-established brands, so its track record is shorter
  • Backup output scales with module count, so size the stack to the backup you actually want

Sungrow

  • Gets the most out of a matched Sungrow hybrid inverter rather than mixing brands
  • High-voltage (SBH) and low-voltage (SBR) suit different backup and sizing needs, so match the range to your goals

Frequently asked questions

Ask both quotes to show usable capacity, power output, backup output and exactly what is included. Prices depend on the model and the installer, so line up the same capacity and backup on each quote.
The larger SigenStor configurations offer whole-home and three-phase backup options. Sungrow's backup scales with the inverter and module choice. For demanding backup, both need to be sized to the job. Ask each installer for the backup power output, not just capacity.
The scheme turns on the inverter in the system. The SigenStor's built-in inverter and Sungrow's residential hybrid inverters are listed on Synergy's Supported Solutions List under DER-Storage, the category the WA Residential Battery Scheme uses. The battery also has to be on the CEC approved list and the household has to join a VPP. Other scheme conditions apply, so confirm the exact Sungrow model code with your installer.
Sungrow has the longer global and Australian history. Sigenergy is newer and has an Australian office. For either brand, ask who handles warranty claims in WA.
No, the SigenStack is a separate and larger Sigenergy system, with Clean Energy Council listings from 46.8 kWh usable. A Sigenergy quote bigger than the largest single SigenStor stack is either a SigenStack or more than one SigenStor.
Yes, with Sigenergy's car-charging module added to the stack, in a 12.5 kW or a 25 kW version. That module carries a 3-year warranty, shorter than the cover on the rest of the stack.
Sigenergy's warranty passes to the next owner as long as the system stays at the address where it was installed. Sungrow's battery warranty belongs to the first owner and does not transfer. The Sungrow SH hybrid's own warranty does transfer, with the original proof of purchase.

Want to take the next step?

Get a quote from a member installer who covers your area. You choose whether to act on it. No obligation.

We collect these details to prepare your quote match and to share with the installer(s) we match you with. Not providing them means we can't match you. Full collection notice.

By requesting quotes you agree to be contacted by installers in our network about your enquiry. Part of WattMate Pty Ltd. No spam, opt out any time.

Not ready for a quote? Solar Battery Perth's battery matcher shows the systems that fit your usage, budget and backup needs, or you can compare all batteries.

Both systems sit in Solar Battery Perth's index of solar batteries for Perth, which lists every CEC-approved model in one comparable dataset.

Where next