Every battery we suggest held a current listing on the Clean Energy Council's approved battery list at our 17 November 2026 register refresh. That listing is the one both the WA Battery Scheme and the federal Cheaper Home Batteries Program pay against.
Which batteries do we suggest, and why?
Each of these is on the Clean Energy Council's approved list, and they are set out alphabetically by brand. Each suits a particular kind of home, and its series page sets out the details to go through with an installer.
Alpha ESS SMILE-G3
A tower of 9.3 kWh LFP modules that Alpha ESS rates at full depth of discharge, so the capacity on the label is the capacity you can use. Its SMILE-G3-B5 battery inverter adds the tower beside the solar inverter already on the house, and the three-phase hybrids give a larger home on three-phase supply one range to grow into.
Synergy's approved list names inverters, not batteries. One condition of the WA Residential Battery Scheme is that the inverter paired with this battery is on that list. The SMILE-G3 inverter series was on the list dated 1 October 2026.
BYD Battery-Box Premium HVS
Its 2.56 kWh modules plug together inside one tower with no wiring between them, so a household can start small and add a module later, and an added module carries its performance warranty from its own invoice date. The inverter comes from another maker on BYD's compatible list, which suits a home that wants to choose its inverter separately.
Synergy's approved list names inverters, not batteries. One condition of the WA Residential Battery Scheme is that the inverter paired with this battery is on that list.
Sigenergy SigenStor
Inverter, battery and an optional car-charging module stand in one outdoor stack instead of three boxes on a wall. The battery modules are sealed against dust and hosed water, so the stack can go on an outside wall, and capacity is built by stacking modules rather than bought in fixed sizes.
A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply. Synergy's list dated 30 October 2026 names SigenStor controllers and complete systems by model, so a SigenStor on a listed model pairs with an inverter listed for battery storage on Synergy's list.
Recall notice for this product: read it on our risk alerts page.
Sungrow SBR
Built from 3.2 kWh modules for a Sungrow SH hybrid, so storage can be sized closely and grown a module at a time. Sungrow's warranty sets no cycle limit on daily self-consumption or backup across its 10 years. It connects only to Sungrow SH hybrids, so it suits a home that has one or is getting one.
Synergy's Supported Solutions List names inverters, not batteries, and the list dated 1 October 2026 flags the Sungrow SH hybrids for the WA Residential Battery Scheme.
Tesla Powerwall 3
Battery and solar inverter in one unit. Panels wire straight into it, so a new system needs no separate solar inverter, and it supports whole-home backup. Over-the-air updates can add features after installation. On a home that already has solar, the built-in inverter may double up on the one already there.
Compatible with Synergy's Midday Saver and other time-of-use plans. The Powerwall 3 is on Synergy's list, but isn't approved for the WA Residential Battery Scheme, so it is not eligible for the scheme's rebate. Other scheme conditions apply.
What decides whether a battery fits your home?
Four things decide the fit: usable capacity, power, backup and the warranty. Usable capacity is the energy you can actually draw, in kilowatt-hours (kWh), and it sets how far into the evening the battery carries the house. The other three decide what it can run at once, what happens in an outage and who stands behind it.
Power is the part most people miss. It is measured in kilowatts (kW), and a battery can only deliver what the inverter it runs through allows. The lower of the two ratings is what your home gets, so a big battery on a small inverter still runs the house at the inverter's pace.
Backup is a design choice, not a battery feature. It comes from the inverter and the circuits the installer wires to it, which is one more reason the inverter matters as much as the battery.
The warranty's years are only the start. Look at the share of capacity it still guarantees at the end of the term, whether a throughput cap can end it early, and which Australian company handles the claim. Your rights under Australian Consumer Law apply alongside any warranty and cannot be signed away.
Which batteries can get the WA Battery Scheme?
The WA Residential Battery Scheme pays $130 per kWh of usable capacity, capped at $1,300, for Synergy customers who join a virtual power plant. The battery has to be on the Clean Energy Council's approved list, and the eligibility test that most often decides a quote sits on the inverter side. A battery system needs an inverter with a battery-storage (DER-Storage) listing on Synergy's Supported Solutions List to be eligible for the WA Battery Scheme. Other scheme conditions apply.
That is why each suggested pick carries its Synergy position from the list we hold. One pick shows how this plays out. The Tesla Powerwall 3 is not eligible for the WA Battery Scheme. Its inverter is built in, and the Powerwall 3 is not approved for battery storage on Synergy's list, so no inverter pairing can make it qualify. Our WA solar battery rebate guide sets out how the scheme and the federal discount work together.
Common approaches to home batteries
Each of the batteries above takes one of these approaches, and each approach suits a different kind of home.
These combine battery and inverter in a single unit. The main advantage is simplicity - fewer components to install, configure, and troubleshoot. Everything is designed to work together.
The trade-off is flexibility. You can't easily upgrade individual components or mix different brands. If the system doesn't suit your needs in five years, you're essentially starting over.
Suits: People who value simplicity over flexibility, new installations where solar and battery are going in together.
These let you start with a smaller capacity and add more battery modules later. Useful if your needs might change - perhaps you're planning an EV, or your children may move out.
Expansion isn't always as straightforward as marketing suggests. Adding modules sometimes requires software updates, inverter changes, or electrical modifications. Ask your installer specifically what expanding would involve.
Suits: People with uncertain future needs, those who want to spread costs over time.
The battery connects through a hybrid inverter that runs the panels and the battery together. It charges the battery on the DC side while exporting AC, so there is one conversion fewer than an AC-coupled setup. This is the modern default for a new install or an inverter replacement.
With existing solar, it means replacing the current inverter with a hybrid. In return, current rules allow a larger array with a battery connected (up to the inverter maker's limit for that model), and DEBS eligibility follows inverter capacity, so the hybrid's rating decides whether a home stays within DEBS.
Suits: New combined solar and battery installations, homes replacing an inverter, and existing systems where the inverter is ageing or more panels are planned.
The battery has its own inverter and connects to the home's AC circuit next to an existing solar inverter. In WA, adding a battery this way counts as an alteration, and in practice that brings whole-of-site compliance into play.
To keep the state rebate, VPP and loan, the setup needs a gateway on Synergy's Supported Solutions List or same-brand shared compliance; without either, export is fixed at 1.5 kW. In practice, third-party gateways have had trouble passing testing, and the extra conversion step costs some efficiency.
Suits: Owners keeping a recent, compliant solar system with no other changes planned. Get a hybrid replacement quoted alongside it.
Why does a bigger battery usually cost less per kWh?
Part of every battery job costs about the same whatever the size, so a larger battery spreads that part over more kWh. The site visit, mounting, cabling, switchboard work, commissioning and the Western Power paperwork take much the same effort for a small battery as a large one.
The inverter works the same way. If the one on your wall cannot run a battery, a new hybrid or battery inverter goes into the quote, and that cost does not shrink with a smaller battery. Both rebates are limited by size too, so past those limits each extra kWh carries less rebate. Solar Battery Perth's solar battery prices in Perth page carries our dated price ranges.
Questions to ask before you choose
These questions show whether a particular system suits your situation, and whether the installer has looked at it closely.
"How many of this particular system have you installed?"
You want someone who has fitted this system before, not someone learning it on your roof.
"What's been your experience when customers need warranty support for this brand?"
Real stories beat theoretical warranty terms.
"Why are you suggesting this system for my situation specifically?"
The answer should reference your actual circumstances, not generic benefits.
"What's included in the total price, and what might be extra?"
Get an itemised breakdown to avoid surprises.
"Does this system give backup power during blackouts? Exactly which circuits?"
Backup capability depends on system design, not just the battery model.
Warning signs
Be cautious of installers or salespeople who:
- Name a specific battery before asking about your usage or looking at your bills
- Push one brand hard while dismissing the others
- Promise savings without showing the usage and tariff they are based on
- Can't explain why the battery they suggest fits your situation
- Create artificial urgency with "limited time" offers or claims that prices are about to rise
None of these is an automatic deal-breaker, but each one points to someone more interested in a sale than in finding the right system for you.
Questions people ask
What does usable capacity mean on a battery, and how is it different from total capacity?
Usable capacity is the energy you can draw from the battery. Total capacity also counts a reserve the battery keeps back to protect its cells. Compare and size on usable capacity, because that is what runs your evening and it is the figure both rebates are worked out on.
What is a hybrid inverter and do I need one?
A hybrid inverter runs the panels and a DC-coupled battery through one box, and it usually replaces the inverter already on the wall. You do not always need one. An AC-coupled battery keeps your solar inverter and adds its own. In WA the AC route can bring whole-of-site compliance into play, so get both options quoted.
What size battery do I need for my home?
Size it to the electricity you use after the sun goes down, not to the rebate. Your solar monitoring app shows when you use power. Our guide to what size battery you need for a Perth home works through it step by step.
Will a solar battery keep my power on during a blackout?
Only if the system is set up for backup. That takes a backup-capable inverter and backup circuits wired in at install. Without them, a grid-connected system switches off when the grid goes down. Ask for backup in writing on the quote, and for which circuits it covers.
How long do home batteries last and what's the warranty?
Warranty terms differ from maker to maker, and each suggested pick's series page sets out its own terms from the maker's warranty document. Compare what the warranty still guarantees at the end of its term, and whether an energy-throughput cap can end it sooner.
Is there a battery comparison table?
Yes. The battery comparison tool lines up approved batteries model by model, from the same register data as this page.
Does Solar Battery Perth rank batteries?
No. We do not rate, rank or score manufacturers or products. The picks on this page are suggestions, each with the reason it suits a kind of home, set out alphabetically by brand.
About this guide. Solar Battery Perth is a Perth library of solar and battery information. Our editorial team writes these guides from the Clean Energy Council product list, Synergy's published scheme rules and the WA Government's guidance, and dates every page when it changes.
What should you do next?
The decision usually turns on one detail a quote leaves vague: which inverter the battery runs through. That one part sets the power your house gets, whether backup is possible and whether the WA Battery Scheme applies. Ask for the inverter model in writing on every quote, then let the battery matcher show which batteries fit your home.
The battery matcher asks about your goal, postcode and daily use, then shows the batteries that fit your home.
Find the batteries that suit your home