Skip to main content
Solar Battery PerthSolar Battery Perth
  • Library
  • Compare
  • Calculate savings
  • Quote
  • Tools
Battery matcher
Battery matcher

Rebate and policy updates by email

What's changing with WA rebates and battery rules, for Perth homeowners.

Solar Battery Perth

WA-specific solar and battery tools with transparent installer matching for Synergy and Western Power customers.

  • 08 9429 8803
  • info@solarbatteryperth.com.au
Explore your optionsCompare products

Tools

  • Solar system quiz
  • Side-by-side comparison
  • Savings calculator
  • Tariff comparison
  • VPP earnings
  • Quote evaluator
  • Warranty comparison
  • Library
  • Product search
  • All tools

Information

  • How it works
  • Resources
  • WA rebates & incentives
  • Battery price index
  • Synergy tariffs
  • Financing
  • Getting started
  • Buyer's guide
  • Solar and battery integration
  • Battery scenarios

Get started

  • Find installers
  • Perth suburbs
  • Brands
  • Contact us
  • Common questions
Privacy policyTerms of useDisclaimerReview policyAffiliate disclosureAccessibility

© 2026 Solar Battery Perth, operated by WattMate Pty Ltd. Independent solar and battery resource for WA homeowners.

Installers pay us a flat $30 including GST per accepted lead, the same for every installer and every system. How it works

45 Ventnor Avenue, West Perth WA 6005

  • Home
  • Library
  • Compare
  • Savings
  • Quote
  1. Home
  2. Batteries
  3. Sungrow
  4. SBR series

Battery series · Sungrow · 6 sizes, all CEC-active

Sungrow SBR series

6 sizes from 6.4 to 22.4 kWh usable, from below the smaller-home band to the medium home band. This page is for picking the size.

Sizes in this series
6
Usable capacity
6.4 to 22.4kWh
Built from
3.2kWh LFP modules
Warranty
10yrs, conditions apply

SBR: the short answer

Sizes in this seriesFrom 6.4 to 22.4 kWh usable
6From 6.4 to 22.4 kWh usable
Closest fit to the WA rebate capThe rebate stops growing past 10 kWh. A rebate limit, not a sizing guide
12.8kWhThe rebate stops growing past 10 kWh. A rebate limit, not a sizing guide
WA Battery Scheme rebateNeeds to pair with an inverter listed for battery storage on Synergy's list. The pairing decides, not the battery
Depends on your inverterNeeds to pair with an inverter listed for battery storage on Synergy's list. The pairing decides, not the battery
Works withFrom the manufacturer's documentation; the CEC register doesn't list pairings
Sungrow SH5.0RT, SH6.0RT, SH8.0RT, SH10RT, SH5.0RS, SH6.0RS, SH8.0RS, SH10RSFrom the manufacturer's documentation; the CEC register doesn't list pairings

Pick your size

Each size is its own CEC listing with its own page. Household bands are the owner’s guide; rebate fit is against the WA scheme’s cap.

Usable capacityOn a 0 to 30 kWh scaleHousehold bandWA rebate fit
  • 6.4kWhSBR064 · 2 modules

    WA rebate fit: Under the cap

    SBR064 · 2 modules · Household band: Below the smaller-home band

    Full specs →, 6.4 kWh
  • 9.6kWhSBR096 · 3 modules

    WA rebate fit: Under the cap

    SBR096 · 3 modules · Household band: Below the smaller-home band

    Full specs →, 9.6 kWh
  • 12.8kWhSBR128 · 4 modules

    WA rebate fit: Closest fit to the cap

    SBR128 · 4 modules · Household band: Smaller home (10 to 15 kWh)

    Full specs →, 12.8 kWh
  • 16kWhSBR160 · 5 modules

    WA rebate fit: Over the cap

    SBR160 · 5 modules · Household band: Between smaller home and medium home

    Full specs →, 16 kWh
  • 19.2kWhSBR192 · 6 modules

    WA rebate fit: Over the cap

    SBR192 · 6 modules · Household band: Between smaller home and medium home

    Full specs →, 19.2 kWh
  • 22.4kWhSBR224 · 7 modules

    WA rebate fit: Over the cap

    SBR224 · 7 modules · Household band: Medium home (20 to 30 kWh)

    Full specs →, 22.4 kWh

Usable capacity10 kWh: where the WA rebate stops growing

The WA Battery Scheme pays $130 per kWh on the first 10 kWh, capped at $1,300. Capacities under 5 kWh receive nothing, and every capacity from 10 kWh up receives the same $1,300. A larger battery does not earn a larger rebate. Whether a particular product qualifies also depends on it pairing with an inverter listed for battery storage on Synergy's list. “Over the cap” does not mean you should not buy it; the extra capacity is simply at full price. Figures come from each size’s own CEC listing; SBP holds no verified per-size pricing for this series.

Is it right for your home?, Sungrow SBR series

The Sungrow SBR is a wall-fixed battery tower built for one partner, a Sungrow SH hybrid, and it connects to no other brand's inverter. Its 3.2 kWh lithium iron phosphate modules take a stack from 6.4 to 25.6 kWh, and up to four equal stacks can share one hybrid. Which hybrid sits beside it sets the usable range, because Sungrow's single-phase hybrids take stacks up to the 22.4 kWh SBR224 and its three-phase hybrids need at least the 9.6 kWh SBR096 to start. Every module adds power with its storage, from 3.84 kW at two modules to 15.36 kW at eight. Where the hybrid could deliver more than the stack, the battery still supplies only its own rating and the panels cover the rest in daylight.

The SBR is rated IP55 for indoors or out and charges in air up to 50°C. The tighter limit in Perth is the performance warranty's yearly heat profile for batteries installed from 21 May 2026, which allows fewer than 90 days between 35°C and 40°C and fewer than 30 above 40°C and asks for an average below 25°C the rest of the year. Where the stack stands is therefore worth settling with the installer, since a garage and a wall in the afternoon sun give the battery different summers.

Check before you quote

  • The supply sets the stack size. Single-phase Sungrow hybrids take stacks up to 22.4 kWh, and three-phase ones need at least 9.6 kWh.
  • The warranty needs monitoring. Sungrow's warranty lists a battery system not monitored in iSolarCloud among its exclusions.

Warranty terms

Product
10 years from installation, or 126 months from manufacture, whichever comes first
Performance
At least 70% of initial capacity at 10 years
Throughput limit
None for daily self-consumption and backup. Any other use, even part of the time, is capped at 2.8 MWh per kWh: 17.92 MWh for the SBR064 to 71.68 MWh for the SBR256
Heat
For batteries installed from 21 May 2026, the performance warranty applies in a year with fewer than 90 days between 35°C and 40°C, fewer than 30 days above 40°C and an average below 25°C for the rest of the year; outside these limits performance and throughput cover may not apply
Conditions
An unmonitored system is excluded; defects from running outside -20°C to 50°C are excluded; the battery may not be moved from its original installation location without Sungrow's written consent
Monitoring data
If the performance data is incomplete, deleted or altered, Sungrow honours the warranty for at least 4 years from installation
Added modules
The performance warranty on modules added to a stack runs from the original installation date or the oldest module's manufacture date; a new stack is registered as a new battery
What is paid for
Replacement parts or an equivalent new or refurbished battery by standard freight, and a set amount to the installer toward labour once the returned battery is found defective; travel and on-site installation costs are not covered
Transfer
To the original purchaser or the end user the installer supplies, and not otherwise
Claims
Through the installer first, then lodged online with Sungrow Australia. Its Australian importer is Sungrow Australia Group Pty Ltd, North Sydney NSW

Source: Sungrow HV Battery Limited Warranty Terms and Conditions, Version 9.0 (Australia), effective 21 May 2026

What it does well, and where it falls short

What it does well

  • The warranty sets no cycle limit on daily self-consumption or backup across its 10 years.
  • Up to four equal stacks run in parallel on one hybrid, adding storage without changing the voltage.
  • Sungrow's SH-RS and SH-T hybrids move backed-up circuits onto the battery in under 10 milliseconds when the grid drops.

Where it falls short

  • It connects only to Sungrow SH hybrids, so a home with another brand's inverter needs a Sungrow hybrid added.
  • The two-module SBR064 supplies 3.84 kW and cannot start a Sungrow three-phase hybrid.
  • A full eight-module stack weighs 279 kg, so the floor beneath it has to carry that weight.

A good fit for

  • A single-phase home with a Sungrow SH-RS hybrid inverter on the wall.
  • A household that wants to size storage in 3.2 kWh steps.
  • A garage or shaded site with floor space beside the inverter.
Explore your options

Get a quote from an installer sourced from the WA (Synergy/Plenti) approved list

  • Not sure what size you need?→
  • Compare with other brands→
  • Get quotes on this series→
  • All Sungrow batteries→

Works with these inverters

These pairings come from the manufacturer’s documentation, not the CEC register.

  • Sungrow SH5.0RT
  • Sungrow SH6.0RT
  • Sungrow SH8.0RT
  • Sungrow SH10RT
  • Sungrow SH5.0RS
  • Sungrow SH6.0RS
  • Sungrow SH8.0RS
  • Sungrow SH10RS

About Sungrow

Years on the CEC list
5
Local support
Yes

Full Sungrow profile

Sources

  • Sungrow SBR064/096/128/160/192/224/256 datasheet (Australia, V1, 2023), checked October 2026
  • Sungrow HV Battery Limited Warranty Terms and Conditions, Version 9.0 (Australia), effective 21 May 2026, checked October 2026
  • Sungrow Australia battery cross-reference chart (SBR and SBH against SH hybrids), V2.2, checked October 2026
  • Clean Energy Council approved batteries, checked October 2026
Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Explore your optionsCompare batteries
Spotted something outdated?