Loading Solar Battery Perth...

Product Information Disclaimer:

Product specifications, pricing, and availability are subject to change without notice. We make no warranties regarding product performance, longevity, or suitability for your specific needs.

Always verify specifications with the manufacturer and installer before purchase. Warranty terms are set by manufacturers and may have conditions not disclosed here. Battery performance degrades over time.

Back to all batteries

CEC approved: June 2025Report outdated info

Sunvolt SV-R30-BATTERY-S5.4

Name: Sunvolt SV-R30-BATTERY-S5.4
Brand: Sunvolt

NA series

CEC Approved

View datasheet (PDF)

Part of NA — see all configurations

Usable capacity: 4.83 kWh
Round-trip efficiency: 92%
Warranty: 12 yr
Chemistry: LFP

Full specifications

Parsed from the manufacturer datasheet, install manual, and warranty document. Confirm against the linked PDFs before relying on a value for a quote or installation.

Capacity & power

Nominal capacity: 5.37 kWh
Usable capacity: 4.83 kWh

Lifespan & degradation

Capacity retained at year 10: 80%
Warranted throughput: 100 MWh

Operating environment

Operating temperature: -10°C to 0°C

Resources

Datasheet Warranty terms Installation guide

Warranty and support

Warranty terms and Australian support structure.

The warranty covers 12 years of performance for your electric storage system. It excludes claims due to non-accredited installations. To make a claim, fill out the warranty claim form found at the provided link.

Duration

years

Throughput

100

MWh

Max Temp

0°

celsius

Max Backup

Level 0

No Backup

Australian support structure

Not verified

We have not verified this brand's Australian support structure. Confirm warranty arrangements with the manufacturer or your installer.

Perth climate suitability

Indoor installation recommended

Rated only to 0°C. Perth summers can exceed that, so install in a climate-controlled space.

Key warranty terms

•Depth of Discharge: 90% usable capacity
•Round-trip Efficiency: 92% rated
•Annual Degradation: ~2.5% per year expected
•Installation: Must be installed by SAA-accredited installer
•Operating Conditions: -10°C to 0°C

✓ TransferableFull replacement≥80% capacity at year 10

Warranty Document Datasheet Compare Warranties

WA Battery Scheme eligibility

Conditional

Synergy SSL inverter pairing, VPP participation and state-rebate qualification for this battery. Rebate and STC amounts are shown in the pricing panel.

AC-coupled system: needs a gateway device on the Synergy SSL (e.g. SMA, Redback) for full eligibility, or a same-brand inverter + battery pair (Sungrow or Fronius) for shared compliance. Without one, export is limited to 1.5kW and VPP/DEBS/rebate/loan are unavailable. AC vs DC coupling

CSIP-AUS compliant
Inverter must be CSIP-AUS compliant under the current WA framework.
Synergy SSL approved inverter
Needs pairing with a Synergy SSL approved inverter.
VPP activation ready
VPP activation requires a Synergy SSL approved inverter.
WA Battery Scheme rebate
Requires Battery Rewards participation under the current WA framework.
Synergy Battery Rewards
Requires a CSIP-AUS compliant system and reliable internet.
Interest-free loan
Not eligible for interest-free financing.

Under current WA rules, new rebate applications require VPP enrolment and CSIP-AUS compliance. How the scheme works · Estimate VPP earnings

About Sunvolt

View Full Profile →

Years in AU Market1+ years

Local SupportNot verified

CEC-Listed Products6 models

1yr AU

CEC-approved products since 2025

1 year in the Australian market

Fault & error codes — Sunvolt NA

Extracted from the installation manual

26 documented

Showing 26 of 26. The official install manual is the authoritative source — always confirm before acting.

09criticalCall your installer
Manual (PDF)
Short circuit on AC output
Likely cause
Load circuit short detected
What to do
Turn off the load breaker and check for shorts. Then turn the inverter on.
16criticalCall your installer
Manual (PDF)
Over temperature fault
Likely cause
Inverter temperature exceeds safe operating limits.
What to do
Turn the inverter off and allow it to cool down before restarting.
18criticalCall your installer
Manual (PDF)
Over power protection
Likely cause
Power output exceeds inverter capacity.
What to do
Turn off the inverter and ensure load is below 5kW before restarting.
19criticalCall your installer
Manual (PDF)
PV insulation resistance is too low
Likely cause
Insulation failure in the PV system.
What to do
Turn off the PV breaker. Check insulation resistance.
22criticalCall your installer
Manual (PDF)
Overload
Likely cause
Load exceeds available power output.
What to do
Reduce load and restart the inverter.
01warningCall your installer
Manual (PDF)
DC bus voltage exceeds the upper threshold
Likely cause
PV voltage exceeds 500Vdc.
What to do
Turn off the inverter using the main switch and make sure PV voltage is below 500Vdc.
02warningCall your installer
Manual (PDF)
Arc occurs on PV
Likely cause
Potential arcing detected on the PV input.
What to do
Turn the inverter off and then back on using the main switch.
03warningCall your installer
Manual (PDF)
DC bus voltage falls below the lower threshold
Likely cause
Voltage at the battery is too low.
What to do
Turn the inverter on. Ensure the battery voltage is within 4 to 58Vdc.
04warningCall your installer
Manual (PDF)
Parallel setting is not correct
Likely cause
Configuration settings for parallel operation are incorrect.
What to do
Check the parallel and mode setting, then turn the inverter off and back on.
05warningCall your installer
Manual (PDF)
Battery discharging current exceeds the upper threshold
Likely cause
Load exceeds battery output limits.
What to do
Turn off the inverter and ensure the Grid and Load terminals are wired properly.
06warningCall your installer
Manual (PDF)
Battery charging current exceeds the upper threshold
Likely cause
Too much current directed into the battery.
What to do
Turn the inverter off and back on. Check PV array for short circuits if the issue persists.
07warningCall your installer
Manual (PDF)
Short circuit on PV1 input
Likely cause
Wiring issue or short circuit detected.
What to do
Turn the inverter off and back on. Inspect for short circuits on PV1.
08warningCall your installer
Manual (PDF)
Short circuit on PV2 input
Likely cause
Wiring issue or short circuit detected.
What to do
Turn the inverter off and back on. Inspect for short circuits on PV2.
10warningCall your installer
Manual (PDF)
Leakage current CT fault
Likely cause
Leakage current detected in the system.
What to do
Check for leaking appliances and ensure all connections are secure. Try resetting the inverter.
11warningCall your installer
Manual (PDF)
DC/DC Current Sensor fault
Likely cause
Sensor failure detected.
What to do
Turn the inverter off and back on. If the issue persists, contact an installer.
13warningCall your installer
Manual (PDF)
PV Current Sensor fault
Likely cause
Sensor malfunction detected.
What to do
Turn the inverter off and then back on.
14warningCall your installer
Manual (PDF)
EEPROM read failure
Likely cause
Memory malfunction.
What to do
Turn the inverter off and then back on. If still not resolved, contact installer.
15warningCall your installer
Manual (PDF)
Communication with main & secondary controllers are interrupted
Likely cause
Disconnected communication wires.
What to do
Turn the inverter off and then back on. Check communication connections.
17warningCall your installer
Manual (PDF)
PV input voltage exceeds the upper threshold
Likely cause
Input voltage exceeds 500VDC.
What to do
Check PV input voltage and turn the inverter off if above the limit.
20warningCall your installer
Manual (PDF)
Battery charging voltage is too high
Likely cause
Voltage from the battery exceeds acceptable limits.
What to do
Ensure connections are secure and turn the inverter off if necessary.
21warningCall your installer
Manual (PDF)
Fan fault
Likely cause
Cooling fan is not operational.
What to do
Turn the inverter off and check the fan operation.
23warningCall your installer
Manual (PDF)
PV input over power
Likely cause
Excessive power input from PV modules.
What to do
Ensure input from PV does not exceed 6.5kW before restarting the inverter.
24warningCall your installer
Manual (PDF)
Battery type is wrong
Likely cause
Incorrect battery specification or settings.
What to do
Set the correct battery type before restarting the inverter.
25warningCall your installer
Manual (PDF)
RCMU test fault
Likely cause
Communication or integrity fault in device.
What to do
Turn the inverter off and back on.
26warningCall your installer
Manual (PDF)
Model setting fault
Likely cause
Configuration mismatch or error.
What to do
Turn the inverter off and check model settings before turning on again.
27warningCall your installer
Manual (PDF)
Battery Voltage Drop
Likely cause
Battery voltage below 30V.
What to do
Check the battery connections and turn the inverter off and back on.

Perth pricing

Typical installed price

$4,347

WA State RebateSubject to eligibility

Federal STCs-$0

After Rebates~$4,347

Prices are estimates. Final pricing depends on installation requirements. STC value is based on the current certificate price of about $39.9.

The WA Battery Scheme rebate (up to $1,300) requires a Synergy-approved (SSL) inverter and VPP enrolment — not all systems qualify, so it is not included above. Confirm eligibility with your installer.

Explore your options

Insufficient Data for Scoring

3 of 5 critical specs available (need 4)

Part of the Sunvolt NA

See all configurations in this series →

Compare options

Compare this battery with other models to find the best fit for your needs.

Compare Products

How it compares

The Sunvolt SV-R30-BATTERY-S5.4 against the closest-sized batteries from other brands.

Specification	Sunvolt SV-R30-BATTERY-S5.4Sunvolt	Koyoe KY-51V105AH-SKoyoe	SolarEdge BAT-05K48SolarEdge

Usable capacity?	4.83 kWh	4.8384 kWh	4.85 kWhbest value
Continuous power?	Not verified	Not verified	Not verified
Peak power?	Not verified	Not verified	Not verified

Round-trip efficiency?	92%	92%	92%
Warranty	12 yearsbest value	10 years	10 years
Chemistry	LFP	LFP	LFP

Specs from the CEC register and datasheet enrichment. Indicative — confirm exact figures with your installer.

Want to take the next step?

Compare quotes from SAA-accredited local installers — you choose which to act on. No obligation, no pressure.

Get quotes on this battery

Free, no-obligation quotes from WA installers

Not sure this is the right size?

Answer a few questions to shortlist batteries

Already have a quote? Check it

Free analysis against WA market rates